diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/TOOLCHAIN_GCC_ARM/STM32F446XE.ld b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/TOOLCHAIN_GCC_ARM/STM32F446XE.ld
new file mode 100644
index 0000000000..5453f9629e
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/TOOLCHAIN_GCC_ARM/STM32F446XE.ld
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
+ RAM (rwx) : ORIGIN = 0x200001C4, LENGTH = 128k - 0x1C4
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/TOOLCHAIN_GCC_ARM/startup_stm32f446xx.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/TOOLCHAIN_GCC_ARM/startup_stm32f446xx.s
new file mode 100644
index 0000000000..c350865a09
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/TOOLCHAIN_GCC_ARM/startup_stm32f446xx.s
@@ -0,0 +1,559 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f446xx.s
+ * @author MCD Application Team
+ * @version V2.3.0
+ * @date 02-March-2015
+ * @brief STM32F446xx Devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/cmsis_nvic.h
new file mode 100644
index 0000000000..a98d56f154
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/cmsis_nvic.h
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F411RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 86 vectors = 344 bytes from 0x40 to 0x197
+// Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+#define NVIC_NUM_VECTORS 102
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/hal_tick.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/hal_tick.c
new file mode 100644
index 0000000000..9f28a210c3
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/hal_tick.c
@@ -0,0 +1,122 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics © COPYRIGHT(c) 2014 STMicroelectronics © COPYRIGHT(c) 2015 STMicroelectronics
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief Consumer Electronics Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DCMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */
+ __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */
+ __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */
+ __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */
+ __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */
+ __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+ __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */
+ __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */
+ __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank3
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */
+ __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */
+ __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */
+ __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */
+ uint32_t RESERVED; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */
+} FMC_Bank3_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank5_6
+ */
+
+typedef struct
+{
+ __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */
+ __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */
+ __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */
+ __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */
+ __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */
+} FMC_Bank5_6_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x24-0x28 */
+ __IO uint32_t CFGR; /*!< SYSCFG Configuration register, Address offset: 0x2C */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< FMPI2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< FMPI2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< FMPI2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< FMPI2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< FMPI2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< FMPI2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< FMPI2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< FMPI2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< FMPI2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< FMPI2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< FMPI2C Transmit data register, Address offset: 0x28 */
+} FMPI2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+ __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */
+ __IO uint32_t DCKCFGR; /*!< RCC Dedicated Clocks configuration register, Address offset: 0x8C */
+ __IO uint32_t CKGATENR; /*!< RCC Clocks Gated ENable Register, Address offset: 0x90 */
+ __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x94 */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+/**
+ * @brief Serial Audio Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */
+} SAI_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */
+ __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */
+ __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */
+ __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */
+ __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */
+ __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */
+} SAI_Block_TypeDef;
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief QUAD Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */
+ __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */
+ __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */
+ __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */
+ __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */
+ __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */
+ __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */
+ __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */
+ __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */
+ __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */
+ __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */
+} QUADSPI_TypeDef;
+
+/**
+ * @brief SPDIFRX Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */
+ __IO uint16_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */
+ uint16_t RESERVED0; /*!< Reserved, 0x06 */
+ __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */
+ __IO uint16_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */
+ uint16_t RESERVED1; /*!< Reserved, 0x0E */
+ __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */
+ __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */
+ __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */
+ uint16_t RESERVED2; /*!< Reserved, 0x1A */
+} SPDIFRX_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief USB_OTG_Core_Registers
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */
+ __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */
+ uint32_t Reserved30[2]; /*!< Reserved 030h */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */
+ __IO uint32_t CID; /*!< User ID Register 03Ch */
+ uint32_t Reserved5[3]; /*!< Reserved 040h-048h */
+ __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */
+ uint32_t Reserved6; /*!< Reserved 050h */
+ __IO uint32_t GLPMCFG; /*!< LPM Register 054h */
+ __IO uint32_t GPWRDN; /*!< Power Down Register 058h */
+ __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */
+ __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */
+ uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+} USB_OTG_GlobalTypeDef;
+
+/**
+ * @brief USB_OTG_device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register 800h */
+ __IO uint32_t DCTL; /*!< dev Control Register 804h */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */
+ uint32_t Reserved0C; /*!< Reserved 80Ch */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */
+ uint32_t Reserved20; /*!< Reserved 820h */
+ uint32_t Reserved9; /*!< Reserved 824h */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */
+ __IO uint32_t DTHRCTL; /*!< dev threshold 830h */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */
+ uint32_t Reserved40; /*!< dedicated EP mask 840h */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */
+ uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */
+} USB_OTG_DeviceTypeDef;
+
+/**
+ * @brief USB_OTG_IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+} USB_OTG_INEndpointTypeDef;
+
+/**
+ * @brief USB_OTG_OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */
+ __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */
+ __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */
+ uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */
+} USB_OTG_OUTEndpointTypeDef;
+
+/**
+ * @brief USB_OTG_Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /*!< Host Configuration Register 400h */
+ __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */
+ __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */
+ uint32_t Reserved40C; /*!< Reserved 40Ch */
+ __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */
+ __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */
+ __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */
+} USB_OTG_HostTypeDef;
+
+/**
+ * @brief USB_OTG_Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */
+ __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */
+ __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */
+ __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */
+ __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */
+ __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */
+ uint32_t Reserved[2]; /*!< Reserved */
+} USB_OTG_HostChannelTypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */
+#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< FMC registers base address */
+#define QSPI_R_BASE ((uint32_t)0xA0001000) /*!< QuadSPI registers base address */
+
+#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END ((uint32_t)0x0807FFFF) /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00)
+#define FMPI2C1_BASE (APB1PERIPH_BASE + 0x6000)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800)
+#define CEC_BASE (APB1PERIPH_BASE + 0x6C00)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+#define SAI1_BASE (APB2PERIPH_BASE + 0x5800)
+#define SAI1_Block_A_BASE (SAI1_BASE + 0x004)
+#define SAI1_Block_B_BASE (SAI1_BASE + 0x024)
+#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00)
+#define SAI2_Block_A_BASE (SAI2_BASE + 0x004)
+#define SAI2_Block_B_BASE (SAI2_BASE + 0x024)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+
+/*!< AHB2 peripherals */
+#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000)
+
+/*!< FMC Bankx registers base address */
+#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000)
+#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104)
+#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080)
+#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140)
+
+/*!< Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE ((uint32_t )0x40040000)
+#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define FMPI2C1 ((FMPI2C_TypeDef *) FMPI2C1_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SAI1 ((SAI_TypeDef *) SAI1_BASE)
+#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE)
+#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE)
+#define SAI2 ((SAI_TypeDef *) SAI2_BASE)
+#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE)
+#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE)
+
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define DCMI ((DCMI_TypeDef *) DCMI_BASE)
+#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE)
+#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE)
+#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE)
+#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE)
+#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint32_t)0x00000001) /*!© COPYRIGHT(c) 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F411xE) && !defined (STM32F446xx)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+ /* #define STM32F411xE */ /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+ #define STM32F446xx /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
+ and STM32F446ZE Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ #define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.3.0
+ */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+ #include "stm32f446xx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/stm32f4xx_hal_conf.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/stm32f4xx_hal_conf.h
new file mode 100644
index 0000000000..f44a1df529
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/stm32f4xx_hal_conf.h
@@ -0,0 +1,405 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 26-December-2014
+ * @brief HAL configuration file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2014 STMicroelectronics © COPYRIGHT 2015 STMicroelectronics © COPYRIGHT(c) 2015 STMicroelectronics
+
+
+
+
+ {% for path in include_paths %}
+
+ {% for s in symbols %}
+
+
+ {% for lib in libraries %}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ {% for path in include_paths %}
+
+ {% for s in symbols %}
+
+
+ {% for lib in libraries %}
+
+
+
+
+
+
+
+
+
+
+
+
+ {% for file in source_files %}
+
+
diff --git a/workspace_tools/export/gcc_arm_nucleo_f446re.tmpl b/workspace_tools/export/gcc_arm_nucleo_f446re.tmpl
new file mode 100644
index 0000000000..224ceb2fae
--- /dev/null
+++ b/workspace_tools/export/gcc_arm_nucleo_f446re.tmpl
@@ -0,0 +1,78 @@
+# This file was automagically generated by mbed.org. For more information,
+# see http://mbed.org/handbook/Exporting-to-GCC-ARM-Embedded
+
+GCC_BIN =
+PROJECT = {{name}}
+OBJECTS = {% for f in to_be_compiled %}{{f}} {% endfor %}
+SYS_OBJECTS = {% for f in object_files %}{{f}} {% endfor %}
+INCLUDE_PATHS = {% for p in include_paths %}-I{{p}} {% endfor %}
+LIBRARY_PATHS = {% for p in library_paths %}-L{{p}} {% endfor %}
+LIBRARIES = {% for lib in libraries %}-l{{lib}} {% endfor %}
+LINKER_SCRIPT = {{linker_script}}
+
+###############################################################################
+AS = $(GCC_BIN)arm-none-eabi-as
+CC = $(GCC_BIN)arm-none-eabi-gcc
+CPP = $(GCC_BIN)arm-none-eabi-g++
+LD = $(GCC_BIN)arm-none-eabi-gcc
+OBJCOPY = $(GCC_BIN)arm-none-eabi-objcopy
+OBJDUMP = $(GCC_BIN)arm-none-eabi-objdump
+SIZE = $(GCC_BIN)arm-none-eabi-size
+
+CPU = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=$(FLOAT_ABI)
+CC_FLAGS = $(CPU) -c -g -fno-common -fmessage-length=0 -Wall -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer
+CC_FLAGS += -MMD -MP
+CC_SYMBOLS = {% for s in symbols %}-D{{s}} {% endfor %}
+
+LD_FLAGS = $(CPU) -Wl,--gc-sections --specs=nano.specs -u _printf_float -u _scanf_float -Wl,--wrap,main
+LD_FLAGS += -Wl,-Map=$(PROJECT).map,--cref
+LD_SYS_LIBS = -lstdc++ -lsupc++ -lm -lc -lgcc -lnosys
+
+ifeq ($(HARDFP),1)
+ FLOAT_ABI = hard
+else
+ FLOAT_ABI = softfp
+endif
+
+ifeq ($(DEBUG), 1)
+ CC_FLAGS += -DDEBUG -O0
+else
+ CC_FLAGS += -DNDEBUG -Os
+endif
+
+all: $(PROJECT).bin $(PROJECT).hex
+
+clean:
+ rm -f $(PROJECT).bin $(PROJECT).elf $(PROJECT).hex $(PROJECT).map $(PROJECT).lst $(OBJECTS) $(DEPS)
+
+.s.o:
+ $(AS) $(CPU) -o $@ $<
+
+.c.o:
+ $(CC) $(CC_FLAGS) $(CC_SYMBOLS) -std=gnu99 $(INCLUDE_PATHS) -o $@ $<
+
+.cpp.o:
+ $(CPP) $(CC_FLAGS) $(CC_SYMBOLS) -std=gnu++98 -fno-rtti $(INCLUDE_PATHS) -o $@ $<
+
+
+$(PROJECT).elf: $(OBJECTS) $(SYS_OBJECTS)
+ $(LD) $(LD_FLAGS) -T$(LINKER_SCRIPT) $(LIBRARY_PATHS) -o $@ $^ $(LIBRARIES) $(LD_SYS_LIBS) $(LIBRARIES) $(LD_SYS_LIBS)
+ $(SIZE) $@
+
+$(PROJECT).bin: $(PROJECT).elf
+ @$(OBJCOPY) -O binary $< $@
+
+$(PROJECT).hex: $(PROJECT).elf
+ @$(OBJCOPY) -O ihex $< $@
+
+$(PROJECT).lst: $(PROJECT).elf
+ @$(OBJDUMP) -Sdh $< > $@
+
+lst: $(PROJECT).lst
+
+size:
+ $(SIZE) $(PROJECT).elf
+
+DEPS = $(OBJECTS:.o=.d) $(SYS_OBJECTS:.o=.d)
+-include $(DEPS)
+
diff --git a/workspace_tools/export/gccarm.py b/workspace_tools/export/gccarm.py
index 2f9865e045..61f1f68375 100755
--- a/workspace_tools/export/gccarm.py
+++ b/workspace_tools/export/gccarm.py
@@ -59,6 +59,7 @@ class GccArm(Exporter):
'ARCH_MAX',
'NUCLEO_F401RE',
'NUCLEO_F411RE',
+ 'NUCLEO_F446RE',
'ARCH_MAX',
'DISCO_F429ZI',
'NUCLEO_F030R8',
diff --git a/workspace_tools/targets.py b/workspace_tools/targets.py
index b7d59ce3e7..a15ac51b71 100755
--- a/workspace_tools/targets.py
+++ b/workspace_tools/targets.py
@@ -587,6 +587,15 @@ class NUCLEO_F411RE(Target):
self.supported_form_factors = ["ARDUINO", "MORPHO"]
self.detect_code = ["0740"]
+class NUCLEO_F446RE(Target):
+ def __init__(self):
+ Target.__init__(self)
+ self.core = "Cortex-M4F"
+ self.extra_labels = ['STM', 'STM32F4', 'STM32F446RE']
+ self.supported_toolchains = ["GCC_ARM"]
+ self.default_toolchain = "uARM"
+ self.supported_form_factors = ["ARDUINO", "MORPHO"]
+
class NUCLEO_L053R8(Target):
def __init__(self):
Target.__init__(self)
@@ -1265,6 +1274,7 @@ TARGETS = [
NUCLEO_F334R8(),
NUCLEO_F401RE(),
NUCLEO_F411RE(),
+ NUCLEO_F446RE(),
NUCLEO_L053R8(),
NUCLEO_L073RZ(),
NUCLEO_L152RE(),
diff --git a/workspace_tools/tests.py b/workspace_tools/tests.py
index 815c292035..22cab07c68 100644
--- a/workspace_tools/tests.py
+++ b/workspace_tools/tests.py
@@ -640,7 +640,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_2", "description": "Mutex resource lock",
@@ -653,7 +653,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_3", "description": "Semaphore resource lock",
@@ -666,7 +666,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_4", "description": "Signals messaging",
@@ -678,7 +678,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_5", "description": "Queue messaging",
@@ -690,7 +690,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_6", "description": "Mail messaging",
@@ -702,7 +702,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_7", "description": "Timer",
@@ -716,7 +716,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_8", "description": "ISR (Queue)",
@@ -728,7 +728,7 @@ TESTS = [
"RZ_A1H", "DISCO_F407VG", "DISCO_F429ZI", "NUCLEO_F411RE",
"NUCLEO_F401RE", "NUCLEO_F334R8", "DISCO_F334C8", "NUCLEO_F302R8",
"NUCLEO_L053R8", "DISCO_L053C8", "NUCLEO_L073RZ", "NUCLEO_F072RB", "NUCLEO_F091RC",
- "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE"],
+ "DISCO_F401VC", "NUCLEO_F303RE", "MAXWSNENV", "MAX32600MBED", "NUCLEO_L152RE", "NUCLEO_F446RE"],
},
{
"id": "RTOS_9", "description": "SD File write-read",