STM32F3 baremetal support

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303x8/device/TOOLCHAIN_ARM/stm32f303x8.sct

@@ -1,76 +1,53 @@
 #! armcc -E
 ; Scatter-Loading Description File
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2014, STMicroelectronics
-; All rights reserved.
 ;
-; Redistribution and use in source and binary forms, with or without
+; SPDX-License-Identifier: BSD-3-Clause
-; modification, are permitted provided that the following conditions are met:
+;******************************************************************************
-;
+;* @attention
-; 1. Redistributions of source code must retain the above copyright notice,
+;*
-;     this list of conditions and the following disclaimer.
+;* Copyright (c) 2016-2020 STMicroelectronics.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
+;* All rights reserved.
-;    this list of conditions and the following disclaimer in the documentation
+;*
-;    and/or other materials provided with the distribution.
+;* This software component is licensed by ST under BSD 3-Clause license,
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* the "License"; You may not use this file except in compliance with the
-;    may be used to endorse or promote products derived from this software
+;* License. You may obtain a copy of the License at:
-;    without specific prior written permission.
+;*                        opensource.org/licenses/BSD-3-Clause
-;
+;*
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;******************************************************************************
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+#include "../cmsis_nvic.h"
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 #if !defined(MBED_APP_START)
-  #define MBED_APP_START            0x08000000
+  #define MBED_APP_START  MBED_ROM_START
 #endif
 
-; STM32F303K8: 64KB FLASH (0x10000)
 #if !defined(MBED_APP_SIZE)
-  #define MBED_APP_SIZE             0x10000
+  #define MBED_APP_SIZE  MBED_ROM_SIZE
 #endif
 
-#if !defined(MBED_RAM_START)
-  #define MBED_RAM_START            0x20000000
-#endif
-
-;12KB SRAM (0x3000)
-#if !defined(MBED_RAM_SIZE)
-  #define MBED_RAM_SIZE             0x3000
-#endif
-
-
 #if !defined(MBED_BOOT_STACK_SIZE)
-  #define MBED_BOOT_STACK_SIZE      0x400
+/* This value is normally defined by the tools to 0x1000 for bare metal and 0x400 for RTOS */
+  #define MBED_BOOT_STACK_SIZE  0x400
 #endif
 
-; 60 Non-Core vectors + 16 ARM Core System Handler Vectors vectors + reserved areas = 98 vectors 392 bytes (0x188) to be reserved in RAM
+/* Round up VECTORS_SIZE to 8 bytes */
-#define VECTOR_SIZE                 0x188
+#define VECTORS_SIZE  (((NVIC_NUM_VECTORS * 4) + 7) AND ~7)
 
-#define RAM_FIXED_SIZE              (MBED_BOOT_STACK_SIZE+VECTOR_SIZE)
+LR_IROM1  MBED_APP_START  MBED_APP_SIZE  {
 
-LR_IROM1  MBED_APP_START  MBED_APP_SIZE  {    ; load region size_region
+  ER_IROM1  MBED_APP_START  MBED_APP_SIZE  {
-
+    *.o (RESET, +First)
-  ER_IROM1  MBED_APP_START  MBED_APP_SIZE  {  ; load address = execution address
+    *(InRoot$$Sections)
-   *.o (RESET, +First)
+    .ANY (+RO)
-   *(InRoot$$Sections)
-   .ANY (+RO)
   }
 
-  RW_IRAM1  (MBED_RAM_START+VECTOR_SIZE)  (MBED_RAM_SIZE-VECTOR_SIZE)  {  ; RW data
+  RW_IRAM1  (MBED_RAM_START + VECTORS_SIZE)  {  ; RW data
-   .ANY (+RW +ZI)
+    .ANY (+RW +ZI)
   }
 
-  ARM_LIB_HEAP  AlignExpr(+0, 16)  EMPTY  (MBED_RAM_SIZE-RAM_FIXED_SIZE+MBED_RAM_START-AlignExpr(ImageLimit(RW_IRAM1), 16))  {
+  ARM_LIB_HEAP  AlignExpr(+0, 16)  EMPTY  (MBED_RAM_START + MBED_RAM_SIZE - MBED_BOOT_STACK_SIZE - AlignExpr(ImageLimit(RW_IRAM1), 16))  { ; Heap growing up
   }
 
-  ARM_LIB_STACK  (MBED_RAM_START+MBED_RAM_SIZE)  EMPTY  -MBED_BOOT_STACK_SIZE { ; stack
+  ARM_LIB_STACK  (MBED_RAM_START + MBED_RAM_SIZE)  EMPTY  -MBED_BOOT_STACK_SIZE  { ; Stack region growing down
   }
 }

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303x8/device/TOOLCHAIN_GCC_ARM/STM32F303X8.ld

@@ -1,24 +1,51 @@
 /* Linker script to configure memory regions. */
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2016-2020 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+*/
 
-#if !defined(MBED_BOOT_STACK_SIZE)
+#include "../cmsis_nvic.h"
-    #define MBED_BOOT_STACK_SIZE 0x400
+
+
+#if !defined(MBED_APP_START)
+  #define MBED_APP_START  MBED_ROM_START
 #endif
 
-STACK_SIZE = MBED_BOOT_STACK_SIZE;
+#if !defined(MBED_APP_SIZE)
+  #define MBED_APP_SIZE  MBED_ROM_SIZE
+#endif
+
+#if !defined(MBED_BOOT_STACK_SIZE)
+    /* This value is normally defined by the tools
+       to 0x1000 for bare metal and 0x400 for RTOS */
+    #define MBED_BOOT_STACK_SIZE  0x400
+#endif
+
+/* Round up VECTORS_SIZE to 8 bytes */
+#define VECTORS_SIZE  (((NVIC_NUM_VECTORS * 4) + 7) & 0xFFFFFFF8)
 
-/* 60 Non-Core vectors + 16 ARM Core System Handler Vectors vectors + reserved areas = 392 bytes (0x188) to be reserved in RAM */
 MEMORY
-{ 
+{
-  FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+    FLASH (rx)   : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE
-  CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 4K
+    RAM (rwx)    : ORIGIN = MBED_RAM_START + VECTORS_SIZE, LENGTH = MBED_RAM_SIZE - VECTORS_SIZE
-  RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 12K - 0x188
 }
 
 /* Linker script to place sections and symbol values. Should be used together
  * with other linker script that defines memory regions FLASH and RAM.
  * It references following symbols, which must be defined in code:
  *   Reset_Handler : Entry of reset handler
- * 
+ *
  * It defines following symbols, which code can use without definition:
  *   __exidx_start
  *   __exidx_end
@@ -49,6 +76,7 @@ SECTIONS
     {
         KEEP(*(.isr_vector))
         *(.text*)
+
         KEEP(*(.init))
         KEEP(*(.fini))
 
@@ -71,7 +99,7 @@ SECTIONS
         KEEP(*(.eh_frame*))
     } > FLASH
 
-    .ARM.extab : 
+    .ARM.extab :
     {
         *(.ARM.extab* .gnu.linkonce.armextab.*)
     } > FLASH
@@ -85,7 +113,7 @@ SECTIONS
 
     __etext = .;
     _sidata = .;
-
+    
     .data : AT (__etext)
     {
         __data_start__ = .;
@@ -106,7 +134,6 @@ SECTIONS
         KEEP(*(.init_array))
         PROVIDE_HIDDEN (__init_array_end = .);
 
-
         . = ALIGN(8);
         /* finit data */
         PROVIDE_HIDDEN (__fini_array_start = .);
@@ -122,6 +149,19 @@ SECTIONS
 
     } > RAM
 
+    /* Uninitialized data section
+     * This region is not initialized by the C/C++ library and can be used to
+     * store state across soft reboots. */
+    .uninitialized (NOLOAD):
+    {
+        . = ALIGN(32);
+        __uninitialized_start = .;
+        *(.uninitialized)
+        KEEP(*(.keep.uninitialized))
+        . = ALIGN(32);
+        __uninitialized_end = .;
+    } > RAM
+    
     .bss :
     {
         . = ALIGN(8);
@@ -133,13 +173,13 @@ SECTIONS
         __bss_end__ = .;
         _ebss = .;
     } > RAM
-    
+
     .heap (COPY):
     {
         __end__ = .;
-        end = __end__;
+        PROVIDE(end = .);
         *(.heap*)
-        . = ORIGIN(RAM) + LENGTH(RAM) - STACK_SIZE;
+        . = ORIGIN(RAM) + LENGTH(RAM) - MBED_BOOT_STACK_SIZE;
         __HeapLimit = .;
     } > RAM
 
@@ -155,10 +195,9 @@ SECTIONS
      * size of stack_dummy section */
     __StackTop = ORIGIN(RAM) + LENGTH(RAM);
     _estack = __StackTop;
-    __StackLimit = __StackTop - STACK_SIZE;
+    __StackLimit = __StackTop - MBED_BOOT_STACK_SIZE;
     PROVIDE(__stack = __StackTop);
-    
+
     /* Check if data + heap + stack exceeds RAM limit */
     ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
 }
-

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303x8/device/TOOLCHAIN_IAR/stm32f303x8.icf

@@ -1,37 +1,59 @@
-/* [ROM = 64kb = 0x10000] */
+/* Linker script to configure memory regions.
-define symbol __intvec_start__     = 0x08000000;
+ *
-define symbol __region_ROM_start__ = 0x08000000;
+ * SPDX-License-Identifier: BSD-3-Clause
-define symbol __region_ROM_end__   = 0x0800FFFF;
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2016-2020 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+*/
+/* Device specific values */
 
-define symbol __region_CCMRAM_start__ = 0x10000000;
+/* Tools provide -DMBED_ROM_START=xxx -DMBED_ROM_SIZE=xxx -DMBED_RAM_START=xxx -DMBED_RAM_SIZE=xxx */
-define symbol __region_CCMRAM_end__   = 0x10000FFF;
 
-/* [RAM = 12kb = 0x3000] Vector table dynamic copy: 98 vectors = 392 bytes (0x188) to be reserved in RAM */
+define symbol VECTORS     = 98; /* This value must match NVIC_NUM_VECTORS in cmsis_nvic.h */
-define symbol __NVIC_start__          = 0x20000000;
+define symbol HEAP_SIZE   = 0x1000;
-define symbol __NVIC_end__            = 0x20000187; /* No need to add 4 more bytes to be aligned on 8 bytes */
-define symbol __region_RAM_start__    = 0x20000188;
-define symbol __region_RAM_end__      = 0x20002FFF;
 
-/* Memory regions */
+/* Common - Do not change */
-define memory mem with size = 4G;
+
-define region ROM_region    = mem:[from __region_ROM_start__    to __region_ROM_end__];
+if (!isdefinedsymbol(MBED_APP_START)) {
-define region RAM_region    = mem:[from __region_RAM_start__    to __region_RAM_end__];
+    define symbol MBED_APP_START = MBED_ROM_START;
-define region CCMRAM_region = mem:[from __region_CCMRAM_start__ to __region_CCMRAM_end__];
+}
+
+if (!isdefinedsymbol(MBED_APP_SIZE)) {
+    define symbol MBED_APP_SIZE = MBED_ROM_SIZE;
+}
 
-/* Stack and Heap */
 if (!isdefinedsymbol(MBED_BOOT_STACK_SIZE)) {
+    /* This value is normally defined by the tools 
+        to 0x1000 for bare metal and 0x400 for RTOS */
     define symbol MBED_BOOT_STACK_SIZE = 0x400;
 }
-define symbol __size_cstack__ = MBED_BOOT_STACK_SIZE;
-define symbol __size_heap__   = 0xC00;
-define block CSTACK    with alignment = 8, size = __size_cstack__   { };
-define block HEAP      with alignment = 8, size = __size_heap__     { };
-define block STACKHEAP with fixed order { block HEAP, block CSTACK };
 
-initialize by copy with packing = zeros { readwrite };
+/* Round up VECTORS_SIZE to 8 bytes */
+define symbol VECTORS_SIZE = ((VECTORS * 4) + 7) & ~7;
+define symbol RAM_REGION_START = MBED_RAM_START + VECTORS_SIZE;
+define symbol RAM_REGION_SIZE = MBED_RAM_SIZE - VECTORS_SIZE;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from MBED_APP_START size MBED_APP_SIZE];
+define region RAM_region = mem:[from RAM_REGION_START size RAM_REGION_SIZE];
+
+define block CSTACK    with alignment = 8, size = MBED_BOOT_STACK_SIZE   { };
+define block HEAP      with alignment = 8, size = HEAP_SIZE     { };
+
+initialize by copy { readwrite };
 do not initialize  { section .noinit };
 
-place at address mem:__intvec_start__ { readonly section .intvec };
+place at address mem: MBED_APP_START { readonly section .intvec };
 
 place in ROM_region   { readonly };
-place in RAM_region   { readwrite, block STACKHEAP };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303x8/device/cmsis_nvic.h

@@ -1,37 +1,39 @@
 /* mbed Microcontroller Library
- *******************************************************************************
+ * SPDX-License-Identifier: BSD-3-Clause
- * Copyright (c) 2014, STMicroelectronics
+ ******************************************************************************
- * All rights reserved.
+ * @attention
  *
- * Redistribution and use in source and binary forms, with or without
+ * <h2><center>&copy; Copyright (c) 2016-2020 STMicroelectronics.
- * modification, are permitted provided that the following conditions are met:
+ * All rights reserved.</center></h2>
  *
- * 1. Redistributions of source code must retain the above copyright notice,
+ * This software component is licensed by ST under BSD 3-Clause license,
- *    this list of conditions and the following disclaimer.
+ * the "License"; You may not use this file except in compliance with the
- * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * License. You may obtain a copy of the License at:
- *    this list of conditions and the following disclaimer in the documentation
+ *                        opensource.org/licenses/BSD-3-Clause
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ ******************************************************************************
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+*/
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
 
 #ifndef MBED_CMSIS_NVIC_H
 #define MBED_CMSIS_NVIC_H
 
+#if !defined(MBED_ROM_START)
+#define MBED_ROM_START  0x8000000
+#endif
+
+#if !defined(MBED_ROM_SIZE)
+#define MBED_ROM_SIZE  0x10000  // 64 KB
+#endif
+
+#if !defined(MBED_RAM_START)
+#define MBED_RAM_START  0x20000000
+#endif
+
+#if !defined(MBED_RAM_SIZE)
+#define MBED_RAM_SIZE  0x3000  // 12 KB
+#endif
+
 #define NVIC_NUM_VECTORS        98
-#define NVIC_RAM_VECTOR_ADDRESS 0x20000000    // Vectors positioned at start of RAM
+#define NVIC_RAM_VECTOR_ADDRESS MBED_RAM_START
 
 #endif

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/device/TOOLCHAIN_ARM/stm32f303xe.sct

@@ -1,81 +1,54 @@
 #! armcc -E
 ; Scatter-Loading Description File
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2014, STMicroelectronics
-; All rights reserved.
 ;
-; Redistribution and use in source and binary forms, with or without
+; SPDX-License-Identifier: BSD-3-Clause
-; modification, are permitted provided that the following conditions are met:
+;******************************************************************************
-;
+;* @attention
-; 1. Redistributions of source code must retain the above copyright notice,
+;*
-;     this list of conditions and the following disclaimer.
+;* Copyright (c) 2016-2020 STMicroelectronics.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
+;* All rights reserved.
-;    this list of conditions and the following disclaimer in the documentation
+;*
-;    and/or other materials provided with the distribution.
+;* This software component is licensed by ST under BSD 3-Clause license,
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* the "License"; You may not use this file except in compliance with the
-;    may be used to endorse or promote products derived from this software
+;* License. You may obtain a copy of the License at:
-;    without specific prior written permission.
+;*                        opensource.org/licenses/BSD-3-Clause
-;
+;*
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;******************************************************************************
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+#include "../cmsis_nvic.h"
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 #if !defined(MBED_APP_START)
-  #define MBED_APP_START 0x08000000
+  #define MBED_APP_START  MBED_ROM_START
 #endif
 
-; STM32F303RE: 512KB FLASH (0x80000)
 #if !defined(MBED_APP_SIZE)
-  #define MBED_APP_SIZE 0x80000
+  #define MBED_APP_SIZE  MBED_ROM_SIZE
 #endif
 
-;64KB SRAM (0x10000)
-#if !defined(MBED_RAM_START)
-  #define MBED_RAM_START 0x20000000
-#endif
-
-#if !defined(MBED_RAM_SIZE)
-  #define MBED_RAM_SIZE 0x10000
-#endif
-
-
 #if !defined(MBED_BOOT_STACK_SIZE)
-  #define MBED_BOOT_STACK_SIZE 0x400
+/* This value is normally defined by the tools to 0x1000 for bare metal and 0x400 for RTOS */
+  #define MBED_BOOT_STACK_SIZE  0x400
 #endif
 
-; 101 vectors = 404 bytes (0x194) 8-byte aligned = 0x198 (0x194 + 0x4) to be reserved in RAM
+/* Round up VECTORS_SIZE to 8 bytes */
-#define VECTOR_SIZE 0x198
+#define VECTORS_SIZE  (((NVIC_NUM_VECTORS * 4) + 7) AND ~7)
 
-#define RAM_FIXED_SIZE (MBED_BOOT_STACK_SIZE+VECTOR_SIZE)
+LR_IROM1  MBED_APP_START  MBED_APP_SIZE  {
 
-LR_IROM1  MBED_APP_START  MBED_APP_SIZE  {    ; load region size_region
+  ER_IROM1  MBED_APP_START  MBED_APP_SIZE  {
-
+    *.o (RESET, +First)
-  ER_IROM1  MBED_APP_START  MBED_APP_SIZE  {  ; load address = execution address
+    *(InRoot$$Sections)
-   *.o (RESET, +First)
+    .ANY (+RO)
-   *(InRoot$$Sections)
-   .ANY (+RO)
   }
 
-  RW_IRAM1  (MBED_RAM_START+VECTOR_SIZE)  (MBED_RAM_SIZE-VECTOR_SIZE)  {  ; RW data
+  RW_IRAM1  (MBED_RAM_START + VECTORS_SIZE)  {  ; RW data
-   .ANY (+RW +ZI)
+    .ANY (+RW +ZI)
   }
 
-  ARM_LIB_HEAP  AlignExpr(+0, 16)  EMPTY  (MBED_RAM_SIZE-RAM_FIXED_SIZE+MBED_RAM_START-AlignExpr(ImageLimit(RW_IRAM1), 16))  {
+  ARM_LIB_HEAP  AlignExpr(+0, 16)  EMPTY  (MBED_RAM_START + MBED_RAM_SIZE - MBED_BOOT_STACK_SIZE - AlignExpr(ImageLimit(RW_IRAM1), 16))  { ; Heap growing up
   }
 
-  ARM_LIB_STACK  (MBED_RAM_START+MBED_RAM_SIZE)  EMPTY  -MBED_BOOT_STACK_SIZE { ; stack
+  ARM_LIB_STACK  (MBED_RAM_START + MBED_RAM_SIZE)  EMPTY  -MBED_BOOT_STACK_SIZE  { ; Stack region growing down
-  }
-
-  CCMRAM (0x10000000) (0x4000)  {
-   .ANY (CCMRAM)
   }
 }
 

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/device/TOOLCHAIN_GCC_ARM/STM32F303XE.ld

@@ -1,32 +1,51 @@
 /* Linker script to configure memory regions. */
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2016-2020 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+*/
+
+#include "../cmsis_nvic.h"
+
+
+#if !defined(MBED_APP_START)
+  #define MBED_APP_START  MBED_ROM_START
+#endif
+
+#if !defined(MBED_APP_SIZE)
+  #define MBED_APP_SIZE  MBED_ROM_SIZE
+#endif
 
 #if !defined(MBED_BOOT_STACK_SIZE)
-    #define MBED_BOOT_STACK_SIZE 0x400
+    /* This value is normally defined by the tools
+       to 0x1000 for bare metal and 0x400 for RTOS */
+    #define MBED_BOOT_STACK_SIZE  0x400
 #endif
 
-STACK_SIZE = MBED_BOOT_STACK_SIZE;
+/* Round up VECTORS_SIZE to 8 bytes */
-
+#define VECTORS_SIZE  (((NVIC_NUM_VECTORS * 4) + 7) & 0xFFFFFFF8)
-/* 0x194 resevered for vectors; 8-byte aligned = 0x198 (0x194 + 0x4)*/
-#ifndef MBED_APP_START
-#define MBED_APP_START 0x08000000
-#endif
-
-#ifndef MBED_APP_SIZE
-#define MBED_APP_SIZE 512K
-#endif
 
 MEMORY
-{ 
+{
-  FLASH (rx) : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE
+    FLASH (rx)   : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE
-  CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 16K
+    RAM (rwx)    : ORIGIN = MBED_RAM_START + VECTORS_SIZE, LENGTH = MBED_RAM_SIZE - VECTORS_SIZE
-  RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 64K - (0x194+0x4)
 }
 
 /* Linker script to place sections and symbol values. Should be used together
  * with other linker script that defines memory regions FLASH and RAM.
  * It references following symbols, which must be defined in code:
  *   Reset_Handler : Entry of reset handler
- * 
+ *
  * It defines following symbols, which code can use without definition:
  *   __exidx_start
  *   __exidx_end
@@ -57,6 +76,7 @@ SECTIONS
     {
         KEEP(*(.isr_vector))
         *(.text*)
+
         KEEP(*(.init))
         KEEP(*(.fini))
 
@@ -79,7 +99,7 @@ SECTIONS
         KEEP(*(.eh_frame*))
     } > FLASH
 
-    .ARM.extab : 
+    .ARM.extab :
     {
         *(.ARM.extab* .gnu.linkonce.armextab.*)
     } > FLASH
@@ -93,7 +113,7 @@ SECTIONS
 
     __etext = .;
     _sidata = .;
-
+    
     .data : AT (__etext)
     {
         __data_start__ = .;
@@ -114,7 +134,6 @@ SECTIONS
         KEEP(*(.init_array))
         PROVIDE_HIDDEN (__init_array_end = .);
 
-
         . = ALIGN(8);
         /* finit data */
         PROVIDE_HIDDEN (__fini_array_start = .);
@@ -130,6 +149,19 @@ SECTIONS
 
     } > RAM
 
+    /* Uninitialized data section
+     * This region is not initialized by the C/C++ library and can be used to
+     * store state across soft reboots. */
+    .uninitialized (NOLOAD):
+    {
+        . = ALIGN(32);
+        __uninitialized_start = .;
+        *(.uninitialized)
+        KEEP(*(.keep.uninitialized))
+        . = ALIGN(32);
+        __uninitialized_end = .;
+    } > RAM
+    
     .bss :
     {
         . = ALIGN(8);
@@ -141,13 +173,13 @@ SECTIONS
         __bss_end__ = .;
         _ebss = .;
     } > RAM
-    
+
     .heap (COPY):
     {
         __end__ = .;
-        end = __end__;
+        PROVIDE(end = .);
         *(.heap*)
-        . = ORIGIN(RAM) + LENGTH(RAM) - STACK_SIZE;
+        . = ORIGIN(RAM) + LENGTH(RAM) - MBED_BOOT_STACK_SIZE;
         __HeapLimit = .;
     } > RAM
 
@@ -163,17 +195,9 @@ SECTIONS
      * size of stack_dummy section */
     __StackTop = ORIGIN(RAM) + LENGTH(RAM);
     _estack = __StackTop;
-    __StackLimit = __StackTop - STACK_SIZE;
+    __StackLimit = __StackTop - MBED_BOOT_STACK_SIZE;
     PROVIDE(__stack = __StackTop);
-    
+
     /* Check if data + heap + stack exceeds RAM limit */
     ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-
-    .CCMRAM (NOLOAD):
-    {
-        Image$$RW_IRAM2$$Base = . ;
-        *(CCMRAM)
-        Image$$RW_IRAM2$$ZI$$Limit = .;
-    } > CCM
 }
-

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/device/TOOLCHAIN_IAR/stm32f303xe.icf

@@ -1,42 +1,59 @@
-if (!isdefinedsymbol(MBED_APP_START)) { define symbol MBED_APP_START = 0x08000000; }
+/* Linker script to configure memory regions.
-if (!isdefinedsymbol(MBED_APP_SIZE)) { define symbol MBED_APP_SIZE = 0x80000; }
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2016-2020 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+*/
+/* Device specific values */
 
-/* [ROM = 512kb = 0x80000] */
+/* Tools provide -DMBED_ROM_START=xxx -DMBED_ROM_SIZE=xxx -DMBED_RAM_START=xxx -DMBED_RAM_SIZE=xxx */
-define symbol __intvec_start__     = MBED_APP_START;
-define symbol __region_ROM_start__ = MBED_APP_START;
-define symbol __region_ROM_end__   = MBED_APP_START + MBED_APP_SIZE - 1;
 
-define symbol __region_CCMRAM_start__ = 0x10000000;
+define symbol VECTORS     = 101; /* This value must match NVIC_NUM_VECTORS in cmsis_nvic.h */
-define symbol __region_CCMRAM_end__   = 0x10003FFF;
+define symbol HEAP_SIZE   = 0x4000;
 
-/* [RAM = 64kb = 0x10000] Vector table dynamic copy: 101 vectors = 404 bytes (0x194) to be reserved in RAM */
+/* Common - Do not change */
-define symbol __NVIC_start__          = 0x20000000;
-define symbol __NVIC_end__            = 0x20000197; /* Add 4 more bytes to be aligned on 8 bytes */
-define symbol __region_RAM_start__    = 0x20000198;
-define symbol __region_RAM_end__      = 0x2000FFFF;
 
-/* Memory regions */
+if (!isdefinedsymbol(MBED_APP_START)) {
-define memory mem with size = 4G;
+    define symbol MBED_APP_START = MBED_ROM_START;
-define region ROM_region    = mem:[from __region_ROM_start__    to __region_ROM_end__];
+}
-define region RAM_region    = mem:[from __region_RAM_start__    to __region_RAM_end__];
+
-define region CCMRAM_region = mem:[from __region_CCMRAM_start__ to __region_CCMRAM_end__];
+if (!isdefinedsymbol(MBED_APP_SIZE)) {
+    define symbol MBED_APP_SIZE = MBED_ROM_SIZE;
+}
 
-/* Stack and Heap */
 if (!isdefinedsymbol(MBED_BOOT_STACK_SIZE)) {
+    /* This value is normally defined by the tools 
+        to 0x1000 for bare metal and 0x400 for RTOS */
     define symbol MBED_BOOT_STACK_SIZE = 0x400;
 }
-define symbol __size_cstack__ = MBED_BOOT_STACK_SIZE;
-define symbol __size_heap__   = 0x5000;
-define block CSTACK    with alignment = 8, size = __size_cstack__   { };
-define block HEAP      with alignment = 8, size = __size_heap__     { };
-define block STACKHEAP with fixed order { block HEAP, block CSTACK };
 
-initialize by copy with packing = zeros { readwrite };
+/* Round up VECTORS_SIZE to 8 bytes */
+define symbol VECTORS_SIZE = ((VECTORS * 4) + 7) & ~7;
+define symbol RAM_REGION_START = MBED_RAM_START + VECTORS_SIZE;
+define symbol RAM_REGION_SIZE = MBED_RAM_SIZE - VECTORS_SIZE;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from MBED_APP_START size MBED_APP_SIZE];
+define region RAM_region = mem:[from RAM_REGION_START size RAM_REGION_SIZE];
+
+define block CSTACK    with alignment = 8, size = MBED_BOOT_STACK_SIZE   { };
+define block HEAP      with alignment = 8, size = HEAP_SIZE     { };
+
+initialize by copy { readwrite };
 do not initialize  { section .noinit };
-do not initialize  { section CCMRAM };
 
-place at address mem:__intvec_start__ { readonly section .intvec };
+place at address mem: MBED_APP_START { readonly section .intvec };
 
 place in ROM_region   { readonly };
-place in RAM_region   { readwrite, block STACKHEAP };
+place in RAM_region   { readwrite,
-place in CCMRAM_region    { section CCMRAM };
+                        block CSTACK, block HEAP };

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/device/cmsis_nvic.h

@@ -1,41 +1,39 @@
 /* mbed Microcontroller Library
- *******************************************************************************
+ * SPDX-License-Identifier: BSD-3-Clause
- * Copyright (c) 2014, STMicroelectronics
+ ******************************************************************************
- * All rights reserved.
+ * @attention
  *
- * Redistribution and use in source and binary forms, with or without
+ * <h2><center>&copy; Copyright (c) 2016-2020 STMicroelectronics.
- * modification, are permitted provided that the following conditions are met:
+ * All rights reserved.</center></h2>
  *
- * 1. Redistributions of source code must retain the above copyright notice,
+ * This software component is licensed by ST under BSD 3-Clause license,
- *    this list of conditions and the following disclaimer.
+ * the "License"; You may not use this file except in compliance with the
- * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * License. You may obtain a copy of the License at:
- *    this list of conditions and the following disclaimer in the documentation
+ *                        opensource.org/licenses/BSD-3-Clause
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ ******************************************************************************
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+*/
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
 
 #ifndef MBED_CMSIS_NVIC_H
 #define MBED_CMSIS_NVIC_H
 
-// STM32F303RE
+#if !defined(MBED_ROM_START)
-// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+#define MBED_ROM_START  0x8000000
-// MCU Peripherals: 85 vectors = 340 bytes from 0x40 to 0x193
+#endif
-// Total: 101 vectors = 404 bytes (0x194) to be reserved in RAM
+
+#if !defined(MBED_ROM_SIZE)
+#define MBED_ROM_SIZE  0x80000  // 512 KB
+#endif
+
+#if !defined(MBED_RAM_START)
+#define MBED_RAM_START  0x20000000
+#endif
+
+#if !defined(MBED_RAM_SIZE)
+#define MBED_RAM_SIZE  0x10000  // 64 KB
+#endif
+
 #define NVIC_NUM_VECTORS        101
-#define NVIC_RAM_VECTOR_ADDRESS 0x20000000    // Vectors positioned at start of RAM
+#define NVIC_RAM_VECTOR_ADDRESS MBED_RAM_START
 
 #endif