diff --git a/targets/TARGET_NUVOTON/TARGET_M460/device/Reg/hbi_reg.h b/targets/TARGET_NUVOTON/TARGET_M460/device/Reg/hbi_reg.h index 0c3c2b8d1b..4f6cb5f46a 100644 --- a/targets/TARGET_NUVOTON/TARGET_M460/device/Reg/hbi_reg.h +++ b/targets/TARGET_NUVOTON/TARGET_M460/device/Reg/hbi_reg.h @@ -68,8 +68,8 @@ typedef struct * | | |1110 = 3 CK cycles. * | | |1111 = 4 CK cycles. * | | |Others = Reserved. - * | | |Note: This field must be set to the same value as “I - * | | |initial Latency in HyperRAM’s Configuration Register 0. + * | | |Note: This field must be set to the same value as I + * | | |initial Latency in HyperRAMs Configuration Register 0. * |[7:6] |CSH |Chip Select Hold Time After CK Falling Edge * | | |This field indicates the hold time between the last CK falling edge and chip select * | | |00 = 0.5 HCLK cycles. @@ -84,14 +84,14 @@ typedef struct * | | |0011 = 4 HCLK cycles. * | | |... * | | |1111 = 16 HCLK cycles. - * | | |Note : This field must meet the HyperRAM device’s specification of tCSHI. + * | | |Note : This field must meet the HyperRAM devices specification of tCSHI. * |[13:12] |BGSIZE |Burst Group Size * | | |This field indicates the burst length on the Hyper Bus transaction * | | |00 = 128 Bytes. * | | |01 = 64 Bytes. * | | |10 = 16 Bytes. * | | |11 = 32 Bytes. - * | | |Note : This field must be set to the same value as “Burst Length” in HyperRAM’s Configuration Regsiter 0. + * | | |Note : This field must be set to the same value as Burst Length in HyperRAMs Configuration Regsiter 0. * |[14] |ENDIAN |Endian Condition on the Hyper Bus Data Pipe * | | |0 = Little-Endian. * | | | Byte A = Bits[7:0] of a 16-Bit ..........word