ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Add EMAC driver for GD32_F307VG

pull/8725/head
chao_king 2018-11-13 16:57:34 +08:00 committed by c_jin
parent e20ddacfc3
commit 700f3a2c69
3 changed files with 754 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

77
features/netsocket/emac-drivers/TARGET_GD_EMAC/TARGET_GD32F30X/gd32f3_eth_init.c Normal file
View File

@ -0,0 +1,77 @@
/* mbed Microcontroller Library
* Copyright (c) 2018 Gigadevice
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "gd32f30x.h"
/**
* Initializes the HW pin for enet
*
*/
void enet_bsp_init(void)
{
/* Enable GPIOs clocks */
rcu_periph_clock_enable(RCU_GPIOA);
rcu_periph_clock_enable(RCU_GPIOB);
rcu_periph_clock_enable(RCU_GPIOC);
rcu_periph_clock_enable(RCU_AF);
gpio_para_init(GPIOA, GPIO_MODE_AF_PP, GPIO_OSPEED_MAX, GPIO_PIN_8);
rcu_pll2_config(RCU_PLL2_MUL10);
rcu_osci_on(RCU_PLL2_CK);
rcu_osci_stab_wait(RCU_PLL2_CK);
rcu_ckout0_config(RCU_CKOUT0SRC_CKPLL2);
gpio_ethernet_phy_select(GPIO_ENET_PHY_RMII);
/** ETH GPIO Configuration
RMII_REF_CLK ----------------------> PA1
RMII_MDIO -------------------------> PA2
RMII_MDC --------------------------> PC1
RMII_MII_CRS_DV -------------------> PA7
RMII_MII_RXD0 ---------------------> PC4
RMII_MII_RXD1 ---------------------> PC5
RMII_MII_TX_EN --------------------> PB11
RMII_MII_TXD0 ---------------------> PB12
RMII_MII_TXD1 ---------------------> PB13
*/
/* PA1: ETH_RMII_REF_CLK */
gpio_para_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_MAX, GPIO_PIN_1);
/* PA2: ETH_MDIO */
gpio_para_init(GPIOA, GPIO_MODE_AF_PP, GPIO_OSPEED_MAX, GPIO_PIN_2);
/* PA7: ETH_RMII_CRS_DV */
gpio_para_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_MAX, GPIO_PIN_7);
/* PB11: ETH_RMII_TX_EN */
gpio_para_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_MAX, GPIO_PIN_11);
/* PB12: ETH_RMII_TXD0 */
gpio_para_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_MAX, GPIO_PIN_12);
/* PB13: ETH_RMII_TXD1 */
gpio_para_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_MAX, GPIO_PIN_13);
/* PC1: ETH_MDC */
gpio_para_init(GPIOC, GPIO_MODE_AF_PP, GPIO_OSPEED_MAX, GPIO_PIN_1);
/* PC4: ETH_RMII_RXD0 */
gpio_para_init(GPIOC, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_MAX, GPIO_PIN_4);
/* PC5: ETH_RMII_RXD1 */
gpio_para_init(GPIOC, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_MAX, GPIO_PIN_5);
/* Enable the Ethernet global Interrupt */
nvic_irq_enable(ENET_IRQn, 0x7, 0);
/* Enable ETHERNET clock */
rcu_periph_clock_enable(RCU_ENET);
rcu_periph_clock_enable(RCU_ENETTX);
rcu_periph_clock_enable(RCU_ENETRX);
}

503
features/netsocket/emac-drivers/TARGET_GD_EMAC/gd32xx_emac.cpp Normal file
View File

@ -0,0 +1,503 @@
/* mbed Microcontroller Library
* Copyright (c) 2018 Gigadevice
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <stdlib.h>
#include "cmsis_os.h"
#include "mbed_interface.h"
#include "mbed_assert.h"
#include "mbed_shared_queues.h"
#include "netsocket/nsapi_types.h"
#include "gd32xx_emac.h"
/* \brief Flags for worker thread */
#define _ENET_FLAG_RX (1)
/** \brief Driver thread priority */
#define _THREAD_STACKSIZE (512)
#define _THREAD_PRIORITY (osPriorityHigh)
#define _PHY_TASK_PERIOD_MS (200)
#define _ENET_HW_ADDR_SIZE (6)
#define _ENET_MTU_SIZE (1500)
#define _ENET_IF_NAME "gd"
#define _ENET_BOARD_PHY_ADDRESS (0x01)
#define _ENET_HARDWARE_CHECKSUM (0)
#define _GD_MAC_ADDR0 0x02
#define _GD_MAC_ADDR1 0xaa
#define _GD_MAC_ADDR2 0xbb
#define _GD32_ID_ADDR 0x1FFFF7E8
/* ENET RxDMA/TxDMA descriptor */
extern enet_descriptors_struct rxdesc_tab[ENET_RXBUF_NUM], txdesc_tab[ENET_TXBUF_NUM];
/* ENET receive buffer */
extern uint8_t rx_buff[ENET_RXBUF_NUM][ENET_RXBUF_SIZE];
/* ENET transmit buffer */
extern uint8_t tx_buff[ENET_TXBUF_NUM][ENET_TXBUF_SIZE];
/*global transmit and receive descriptors pointers */
extern enet_descriptors_struct *dma_current_txdesc;
extern enet_descriptors_struct *dma_current_rxdesc;
#ifdef __cplusplus
extern "C" {
#endif
void ENET_IRQHandler(void);
void enet_bsp_init(void);
#ifdef __cplusplus
}
#endif
/**
* Ethernet IRQ Handler
*
*/
void ENET_IRQHandler(void)
{
/* frame received */
if (SET == enet_interrupt_flag_get(ENET_DMA_INT_FLAG_RS)) {
/* clear the enet DMA Rx interrupt pending bits */
enet_interrupt_flag_clear(ENET_DMA_INT_FLAG_RS_CLR);
enet_interrupt_flag_clear(ENET_DMA_INT_FLAG_NI_CLR);
/* Ethernet Rx Transfer completed callback */
GD32_EMAC &emac = GD32_EMAC::get_instance();
if (emac.rx_thread) {
osThreadFlagsSet(emac.rx_thread, _ENET_FLAG_RX);
}
}
}
GD32_EMAC::GD32_EMAC()
: rx_thread(0),
phy_status(0)
{
}
static osThreadId_t create_new_thread(const char *threadName, void (*thread)(void *arg), void *arg, int stacksize, osPriority_t priority, mbed_rtos_storage_thread_t *thread_cb)
{
osThreadAttr_t attr = {0};
attr.name = threadName;
attr.stack_mem = malloc(stacksize);
attr.cb_mem = thread_cb;
attr.stack_size = stacksize;
attr.cb_size = sizeof(mbed_rtos_storage_thread_t);
attr.priority = priority;
return osThreadNew(thread, arg, &attr);
}
/** \brief Low level init of the MAC and PHY.
*
*/
bool GD32_EMAC::low_level_init()
{
/* Init ETH */
uint8_t macaddr[6];
uint32_t i;
#if (MBED_MAC_ADDRESS_SUM != MBED_MAC_ADDR_INTERFACE)
MACAddr[0] = MBED_MAC_ADDR_0;
MACAddr[1] = MBED_MAC_ADDR_1;
MACAddr[2] = MBED_MAC_ADDR_2;
MACAddr[3] = MBED_MAC_ADDR_3;
MACAddr[4] = MBED_MAC_ADDR_4;
MACAddr[5] = MBED_MAC_ADDR_5;
#else
mbed_mac_address((char *)macaddr);
#endif
enet_bsp_init();
/* reset ethernet on AHB bus */
enet_deinit();
if (ERROR == enet_software_reset()) {
while (1);
}
#if (1 == _ENET_HARDWARE_CHECKSUM)
if (ERROR == enet_init(ENET_AUTO_NEGOTIATION, ENET_AUTOCHECKSUM_DROP_FAILFRAMES, ENET_BROADCAST_FRAMES_PASS)) {
while (1);
}
#else
if (ERROR == enet_init(ENET_AUTO_NEGOTIATION, ENET_NO_AUTOCHECKSUM, ENET_BROADCAST_FRAMES_PASS)) {
while (1);
}
#endif
/* initialize MAC address in ethernet MAC */
enet_mac_address_set(ENET_MAC_ADDRESS0, macaddr);
enet_interrupt_enable(ENET_DMA_INT_NIE);
enet_interrupt_enable(ENET_DMA_INT_RIE);
/* Initialize Tx Descriptors list: Chain Mode */
enet_descriptors_chain_init(ENET_DMA_TX);
#if (1 == _ENET_HARDWARE_CHECKSUM)
/* enable the TCP, UDP and ICMP checksum insertion for the Tx frames */
for (i = 0; i < ENET_TXBUF_NUM; i++) {
enet_transmit_checksum_config(&txdesc_tab[i], ENET_CHECKSUM_TCPUDPICMP_FULL);
}
#endif
/* Initialize Rx Descriptors list: Chain Mode */
enet_descriptors_chain_init(ENET_DMA_RX);
/* enable ethernet Rx interrrupt */
for (i = 0; i < ENET_RXBUF_NUM; i++) {
enet_rx_desc_immediate_receive_complete_interrupt(&rxdesc_tab[i]);
}
/* enable MAC and DMA transmission and reception */
enet_enable();
return true;
}
/**
* Sends the packet over the link
*
* That can not be called from an interrupt context.
*
* @param buf Packet to be send
* @return True if the packet was send successfully, False otherwise
*/
bool GD32_EMAC::link_out(emac_mem_buf_t *buf)
{
emac_mem_buf_t *q;
uint8_t *buffer;
uint16_t framelength = 0;
/* Get exclusive access */
TXLockMutex.lock();
while ((uint32_t)RESET != (dma_current_txdesc->status & ENET_TDES0_DAV)) {}
/* copy frame from pbufs to driver buffers */
buffer = reinterpret_cast<uint8_t *>(enet_desc_information_get(dma_current_txdesc, TXDESC_BUFFER_1_ADDR));
for (q = buf; q != NULL; q = memory_manager->get_next(q)) {
memcpy(static_cast<uint8_t *>(&buffer[framelength]), static_cast<uint8_t *>(memory_manager->get_ptr(q)), memory_manager->get_len(q));
framelength = framelength + memory_manager->get_len(q);
}
/* Prepare transmit descriptors to give to DMA */
if (SUCCESS != ENET_NOCOPY_FRAME_TRANSMIT(framelength)) {
while (1);
}
memory_manager->free(buf);
/* Restore access */
TXLockMutex.unlock();
return true;
}
/** \brief Attempt to read a packet from the EMAC interface.
*
*/
emac_mem_buf_t *GD32_EMAC::low_level_input(void)
{
emac_mem_buf_t *p = NULL, *q;
uint32_t l = 0;
uint16_t len;
uint8_t *buffer;
/* obtain the size of the packet and put it into the "len" variable. */
len = enet_desc_information_get(dma_current_rxdesc, RXDESC_FRAME_LENGTH);
buffer = reinterpret_cast<uint8_t *>(enet_desc_information_get(dma_current_rxdesc, RXDESC_BUFFER_1_ADDR));
if (len > 0) {
/* Allocate a memory buffer chain from buffer pool */
p = memory_manager->alloc_pool(len, 0);
} else {
return p;
}
if (p != NULL) {
for (q = p; q != NULL; q = memory_manager->get_next(q)) {
memcpy(static_cast<uint8_t *>(memory_manager->get_ptr(q)), static_cast<uint8_t *>(&buffer[l]), memory_manager->get_len(q));
l = l + memory_manager->get_len(q);
}
}
ENET_NOCOPY_FRAME_RECEIVE();
return p;
}
/** \brief Attempt to read a packet from the EMAC interface.
*
*/
void GD32_EMAC::packet_rx()
{
/* move received packet into a new buf */
while (1) {
emac_mem_buf_t *p = NULL;
p = low_level_input();
if (p) {
emac_link_input_cb(p);
} else {
break;
}
}
}
/** \brief Worker thread.
*
* Woken by thread flags to receive packets or clean up transmit
*
* \param[in] pvParameters pointer to the interface data
*/
void GD32_EMAC::thread_function(void *pvParameters)
{
static struct GD32_EMAC *gd32_enet = static_cast<GD32_EMAC *>(pvParameters);
while (1) {
uint32_t flags = osThreadFlagsWait(_ENET_FLAG_RX, osFlagsWaitAny, osWaitForever);
if (flags & _ENET_FLAG_RX) {
gd32_enet->packet_rx();
}
}
}
/**
* This task checks phy link status and updates net status
*/
void GD32_EMAC::phy_task()
{
uint16_t regval;
enet_phy_write_read(ENET_PHY_READ, _ENET_BOARD_PHY_ADDRESS, PHY_REG_BSR, &regval);
if (emac_link_state_cb) {
regval &= PHY_LINKED_STATUS;
if (phy_status != regval) {
if (regval == PHY_LINKED_STATUS) {
emac_link_state_cb(true);;
} else {
emac_link_state_cb(false);
}
}
}
phy_status = regval;
}
void GD32_EMAC::eth_arch_enable_interrupts(void)
{
nvic_irq_enable(ENET_IRQn, 7, 0);
}
void GD32_EMAC::eth_arch_disable_interrupts(void)
{
nvic_irq_disable(ENET_IRQn);
}
/** This returns a unique 6-byte MAC address, based on the device UID
* This function overrides hal/common/mbed_interface.c function
* @param mac A 6-byte array to write the MAC address
*/
void mbed_mac_address(char *mac)
{
uint32_t unique_id;
unique_id = *(uint32_t *)_GD32_ID_ADDR;
mac[0] = _GD_MAC_ADDR0;
mac[1] = _GD_MAC_ADDR1;
mac[2] = _GD_MAC_ADDR2;
mac[3] = (unique_id & 0x00ff0000) >> 16;
mac[4] = (unique_id & 0x0000ff00) >> 8;
mac[5] = (unique_id & 0x000000ff);
}
/**
* Initializes the HW
*
* @return True on success, False in case of an error.
*/
bool GD32_EMAC::power_up()
{
/* Initialize the hardware */
if (true != low_level_init()) {
return false;
}
/* Worker thread */
rx_thread = create_new_thread("gd32_emac_thread", &GD32_EMAC::thread_function, this, _THREAD_STACKSIZE, _THREAD_PRIORITY, &rx_thread_cb);
phy_task_handle = mbed::mbed_event_queue()->call_every(_PHY_TASK_PERIOD_MS, mbed::callback(this, &GD32_EMAC::phy_task));
/* Allow the PHY task to detect the initial link state and set up the proper flags */
osDelay(10);
eth_arch_enable_interrupts();
return true;
}
/**
* Return maximum transmission unit
*
* @return MTU in bytes
*/
uint32_t GD32_EMAC::get_mtu_size() const
{
return _ENET_MTU_SIZE;
}
/**
* Gets memory buffer alignment preference
*
* Gets preferred memory buffer alignment of the Emac device. IP stack may or may not
* align link out memory buffer chains using the alignment.
*
* @return Memory alignment requirement in bytes
*/
uint32_t GD32_EMAC::get_align_preference() const
{
return 0;
}
/**
* Return interface name
*
* @param name Pointer to where the name should be written
* @param size Maximum number of character to copy
*/
void GD32_EMAC::get_ifname(char *name, uint8_t size) const
{
memcpy(name, _ENET_IF_NAME, (size < sizeof(_ENET_IF_NAME)) ? size : sizeof(_ENET_IF_NAME));
}
/**
* Returns size of the underlying interface HW address size.
*
* @return HW address size in bytes
*/
uint8_t GD32_EMAC::get_hwaddr_size() const
{
return _ENET_HW_ADDR_SIZE;
}
/**
* Returns size of the underlying interface HW address size.
*
* @return HW address size in bytes
*/
bool GD32_EMAC::get_hwaddr(uint8_t *addr) const
{
mbed_mac_address((char *)addr);
return true;
}
/**
* Set HW address for interface
*
* Provided address has to be of correct size, see @a get_hwaddr_size
*
* Called to set the MAC address to actually use - if @a get_hwaddr is provided
* the stack would normally use that, but it could be overridden, eg for test
* purposes.
*
* @param addr Address to be set
*/
void GD32_EMAC::set_hwaddr(const uint8_t *addr)
{
/* No-op at this stage */
}
/**
* Sets a callback that needs to be called for packets received for that interface
*
* @param input_cb Function to be register as a callback
*/
void GD32_EMAC::set_link_input_cb(emac_link_input_cb_t input_cb)
{
emac_link_input_cb = input_cb;
}
/**
* Sets a callback that needs to be called on link status changes for given interface
*
* @param state_cb Function to be register as a callback
*/
void GD32_EMAC::set_link_state_cb(emac_link_state_change_cb_t state_cb)
{
emac_link_state_cb = state_cb;
}
/** Add device to a multicast group
*
* @param address A multicast group hardware address
*/
void GD32_EMAC::add_multicast_group(const uint8_t *addr)
{
/* No-op at this stage */
}
/** Remove device from a multicast group
*
* @param address A multicast group hardware address
*/
void GD32_EMAC::remove_multicast_group(const uint8_t *addr)
{
/* No-op at this stage */
}
/** Request reception of all multicast packets
*
* @param all True to receive all multicasts
* False to receive only multicasts addressed to specified groups
*/
void GD32_EMAC::set_all_multicast(bool all)
{
/* No-op at this stage */
}
/**
* Deinitializes the HW
*
*/
void GD32_EMAC::power_down()
{
/* No-op at this stage */
}
/** Sets memory manager that is used to handle memory buffers
*
* @param mem_mngr Pointer to memory manager
*/
void GD32_EMAC::set_memory_manager(EMACMemoryManager &mem_mngr)
{
memory_manager = &mem_mngr;
}
GD32_EMAC &GD32_EMAC::get_instance()
{
static GD32_EMAC emac;
return emac;
}
/* Weak so a module can override */
MBED_WEAK EMAC &EMAC::get_default_instance()
{
return GD32_EMAC::get_instance();
}

174
features/netsocket/emac-drivers/TARGET_GD_EMAC/gd32xx_emac.h Normal file
View File

@ -0,0 +1,174 @@
/* mbed Microcontroller Library
* Copyright (c) 2018 Gigadevice
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef GD32_EMAC_H_
#define GD32_EMAC_H_
#include "EMAC.h"
#include "rtos/Semaphore.h"
#include "rtos/Mutex.h"
class GD32_EMAC : public EMAC {
public:
GD32_EMAC();
static GD32_EMAC &get_instance();
/**
* Return maximum transmission unit
*
* @return MTU in bytes
*/
virtual uint32_t get_mtu_size() const;
/**
* Gets memory buffer alignment preference
*
* Gets preferred memory buffer alignment of the Emac device. IP stack may or may not
* align link out memory buffer chains using the alignment.
*
* @return Memory alignment requirement in bytes
*/
virtual uint32_t get_align_preference() const;
/**
* Return interface name
*
* @param name Pointer to where the name should be written
* @param size Maximum number of character to copy
*/
virtual void get_ifname(char *name, uint8_t size) const;
/**
* Returns size of the underlying interface HW address size.
*
* @return HW address size in bytes
*/
virtual uint8_t get_hwaddr_size() const;
/**
* Return interface-supplied HW address
*
* Copies HW address to provided memory, @param addr has to be of correct size see @a get_hwaddr_size
*
* HW address need not be provided if this interface does not have its own HW
* address configuration; stack will choose address from central system
* configuration if the function returns false and does not write to addr.
*
* @param addr HW address for underlying interface
* @return true if HW address is available
*/
virtual bool get_hwaddr(uint8_t *addr) const;
/**
* Set HW address for interface
*
* Provided address has to be of correct size, see @a get_hwaddr_size
*
* Called to set the MAC address to actually use - if @a get_hwaddr is provided
* the stack would normally use that, but it could be overridden, eg for test
* purposes.
*
* @param addr Address to be set
*/
virtual void set_hwaddr(const uint8_t *addr);
/**
* Sends the packet over the link
*
* That can not be called from an interrupt context.
*
* @param buf Packet to be send
* @return True if the packet was send successfully, False otherwise
*/
virtual bool link_out(emac_mem_buf_t *buf);
/**
* Initializes the HW
*
* @return True on success, False in case of an error.
*/
virtual bool power_up();
/**
* Deinitializes the HW
*
*/
virtual void power_down();
/**
* Sets a callback that needs to be called for packets received for that interface
*
* @param input_cb Function to be register as a callback
*/
virtual void set_link_input_cb(emac_link_input_cb_t input_cb);
/**
* Sets a callback that needs to be called on link status changes for given interface
*
* @param state_cb Function to be register as a callback
*/
virtual void set_link_state_cb(emac_link_state_change_cb_t state_cb);
/** Add device to a multicast group
*
* @param address A multicast group hardware address
*/
virtual void add_multicast_group(const uint8_t *address);
/** Remove device from a multicast group
*
* @param address A multicast group hardware address
*/
virtual void remove_multicast_group(const uint8_t *address);
/** Request reception of all multicast packets
*
* @param all True to receive all multicasts
* False to receive only multicasts addressed to specified groups
*/
virtual void set_all_multicast(bool all);
/** Sets memory manager that is used to handle memory buffers
*
* @param mem_mngr Pointer to memory manager
*/
virtual void set_memory_manager(EMACMemoryManager &mem_mngr);
/* Called from driver functions */
osThreadId_t rx_thread; /**< Processing rx thread */
private:
bool low_level_init();
void packet_rx();
emac_mem_buf_t *low_level_input(void);
static void thread_function(void *pvParameters);
void phy_task();
void eth_arch_enable_interrupts();
void eth_arch_disable_interrupts();
mbed_rtos_storage_thread_t rx_thread_cb;
rtos::Mutex TXLockMutex;/**< TX critical section mutex */
emac_link_input_cb_t emac_link_input_cb; /**< Callback for incoming data */
emac_link_state_change_cb_t emac_link_state_cb; /**< Link state change callback */
EMACMemoryManager *memory_manager; /**< Memory manager */
uint32_t phy_status;
int phy_task_handle; /**< Handle for phy task event */
};
#endif /* GD32_EMAC_H_ */