Squashed 'features/nanostack/FEATURE_NANOSTACK/sal-stack-nanostack/' changes from 0a5ef1c..0697d9a

0697d9a Remove Jenkinsfile and .gitmodules
f983190 Merge branch 'release_internal' into release_external
86c0f98 Nanostack v7.0.3 release corrections (#1491)

git-subtree-dir: features/nanostack/FEATURE_NANOSTACK/sal-stack-nanostack
git-subtree-split: 0697d9ab41e347bedc66ff2667cf6c06e9573652

Jenkinsfile

@@ -1,290 +0,0 @@
-// Compiler:target pairs for assigning yotta builds to correct slave labels
-def yottaTargets = [
-  armcc : "frdm-k64f-armcc",
-  gcc   : "frdm-k64f-gcc"
-  ]
-
-def morpheusTargets = [
-  armcc: "K64F",
-  gcc  : "K64F"
-  ]  
-  
-// Compilers for makefile based build steps  
-def makeCompilers = [
-  "armcc", 
-  "gcc",
-  "arm-none-eabi-gcc"
-  ]
-
-// Nanostack configurations for makefile based build steps  
-def makeConfigs = [
-  "generic",
-  "lowpan_border_router",
-  "lowpan_border_router_rf_tunnel",
-  "lowpan_host",
-  "lowpan_router",
-  "nanostack_full",
-  "rf_interface",
-  "thread_border_router",
-  "thread_router",
-  "thread_end_device",
-  "thread_full_end_device",
-  "thread_thci"
-  ]
-
-/*****************************************************
- *                                                   *
- * Check out sources only once and use stash/unstash *
- * to distribute source to actual builds             *
- *                                                   *
- ****************************************************/
-node ("linux") {
-  stage "checkout"
-  // deleteDir deletes recursively current directory
-  deleteDir() 
-  // Recursively clone ARMmbed/nanomesh-applications repository
-  checkoutApplications()
-  
-  // After cloning nanomesh-applications we need to clean and
-  // re-clone nanostack with the changes under test
-  dir ("applications") {
-    sh "rm -rf nanostack && mkdir nanostack"
-    dir("nanostack") {
-      // Check out current branch with changes under test
-      checkout scm
-    }
-  }
-  // Check if these variables are available
-  echo "source branch: ${env.BRANCH_NAME}\n"
-  echo "target branch: ${env.CHANGE_TARGET}\n"
-  echo "change id: ${env.CHANGE_ID}\n"
-  echo "change title: ${env.CHANGE_TITLE}\n"
-  echo "change url: ${env.CHANGE_URL}\n"
-  echo "git revision: ${env.GIT_REVISION}\n"  
-  
-  // Stash stores a set of files for use later in the same build
-  stash includes: '**', useDefaultExcludes: false, name: 'workarea'
-}
-  
-/**********************************************
- *                                            *
- * Create step definitions for parallel       *
- * build execution                            *
- *                                            *
- *********************************************/
-def stepsForParallel = [:]
-
-// Add yotta build steps to parallel execution
-for (int i = 0; i < yottaTargets.size(); i++) {
-    def compiler = yottaTargets.keySet().asList().get(i)
-    def target = yottaTargets.get(compiler)
-    def stepName = "yotta ${target}"
-    stepsForParallel[stepName] = yottaBuildStep(compiler, target)
-}
-
-// Add morpheus build steps to parallel execution
-/* Not yet
-for (int i = 0; i < morpheusTargets.size(); i++) {
-    def compiler = morpheusTargets.keySet().asList().get(i)
-    def target = morpheusTargets.get(compiler)
-    def stepName = "morpheus ${target}"
-    stepsForParallel[stepName] = morpheusBuildStep(compiler, target)
-}
-*/
-// Add makefile build steps to parallel execution
-for (int i = 0; i < makeCompilers.size(); i++) {
-  for (int j = 0; j < makeConfigs.size(); j++) {
-    def compiler = makeCompilers.get(i)
-    def config = makeConfigs.get(j)
-    def stepName = "${compiler} ${config}"
-    stepsForParallel[stepName] = makeBuildStep(compiler, config)
-  }
-}
-
-// Add smoketest step to parallel execution
-stepsForParallel["smokeTest"] = smokeTestStep()
-
-/**********************************************
- *                                            *
- * Actually run the steps in parallel         *
- *                                            *
- *********************************************/
-stage "build"
-parallel stepsForParallel
-
-
-/**********************************************
- *                                            *
- * End of execution, internal functions below *
- *                                            *
- *********************************************/
-// Create build step for morpheus
-def morpheusBuildStep(compiler, target) {
-  return {
-    node ("${compiler}") {
-      deleteDir()
-      unstash 'workarea'
-
-      dir ("applications/nanostack") {
-        if("${compiler}" == "armcc") {
-          sh "mbed compile -m ${target} -t ARM -c"
-        }
-        if("${compiler}" == "gcc") {
-          sh "mbed compile -m ${target} -t GCC_ARM -c"
-        }
-      }
-    }
-  }
-}
- 
-// Create build step definition for yotta build
-def yottaBuildStep(compiler, target) {
-  return {
-    node ("${compiler}") {
-      deleteDir()
-      unstash 'workarea'
-
-      dir ("applications/nanostack") {
-        sh "yotta target ${target}"
-        sh "yotta build"
-      }
-    }
-  }
-}
-
-// Create build step definition for makefile build
-def makeBuildStep(compiler, config) {
-  return {
-    node ("${compiler}") {
-      deleteDir()
-      unstash 'workarea'
-      
-      dir ("applications") {
-        sh "make -C libService CC=${compiler} CONFIG=${config} export-headers"
-        sh "make -C nanostack CC=${compiler} CONFIG=${config}"
-      }
-    }
-  }
-}
-
-// Create build step definition for smoke test
-def smokeTestStep() {
-  return {
-    node ("linux_test") {
-      deleteDir()
-      unstash 'workarea'
-      executeSmokeTest()
-      executeSmokePostbuild()
-    }
-  }
-}
-
-// Recursively clone ARMmbed/nanomesh-applications repository
-def checkoutApplications() {
-  // Check out nanomesh-applications master branch and update all submodules
-  checkout([$class: 'GitSCM', 
-    branches: [[name: '*/master']], 
-    doGenerateSubmoduleConfigurations: false, 
-    extensions: [
-      [$class: 'RelativeTargetDirectory', relativeTargetDir: 'applications'], 
-      [$class: 'ScmName', name: 'nanomesh-applications'], 
-      [$class: 'SubmoduleOption', disableSubmodules: false, recursiveSubmodules: true, reference: '', trackingSubmodules: true],
-      [$class: 'LocalBranch', localBranch: '**']
-    ], 
-    submoduleCfg: [], 
-    userRemoteConfigs: [[url: 'git@github.com:ARMmbed/nanomesh-applications.git']]
-  ])
-}
-
-
-def executeSmokeTest() {
-  dir ("applications") {
-    sh "make -f Makefile.simulator test-all-builds"
-    sh "make -f Makefile.simulator"
-    dir ("mbed-clitest") {
-      sh "python clitest.py --tcdir testcases/6lowpan --testtype smoke --type simulate --use_sniffer -w --valgrind --valgrind_tool memcheck -v"
-      dir ("log") {
-        sh "find . -name \\result.html -execdir mv {} result_6lp_smoke.html \\;"
-        sh "find . -name \\result_6lp_smoke.html -exec cp {} . \\;"
-        sh "find . -name \\*valgrind* -exec cp {} . \\;"
-        sh "find . -name \\result.junit.xml -execdir mv {} result.junit_6lp_smoke.xml \\;"
-        sh "find . -name \\result.junit_6lp_smoke.xml -exec cp {} . \\;"
-      }
-      sh "python clitest.py --group thread --testtype smoke --status released --type simulate -w --valgrind --valgrind_tool memcheck -v"
-      dir ("log") {
-        sh "find . -name \\result.html -execdir mv {} result_thread_smoke.html \\;"
-        sh "find . -name \\result_thread_smoke.html -exec cp {} . \\;"
-        sh "find . -name \\*valgrind* -exec cp {} . \\;"
-        sh "find . -name \\result.junit.xml -execdir mv {} result.junit_thread_smoke.xml \\;"
-        sh "find . -name \\result.junit_thread_smoke.xml -exec cp {} . \\;"
-      }
-    }
-    dir ("nanostack") {
-      sh "make CC=cppcheck CPPCHECK_OPTS=\"--xml --xml-version=2 2> cppcheck.xml\""
-      sh "sed -i 's%\\(<location file=\"\\)%\\1nanomesh-applications/nanostack/%' cppcheck.xml"
-    }
-  }
-}
-
-def executeSmokePostbuild() {
-  // Archive artifacts
-  archive 'applications/nanostack/cppcheck.xml, applications/mbed-clitest/log/**/*'
-  
-  // Publish HTML reports
-  publishHTML(target: [allowMissing: false, alwaysLinkToLastBuild: false, keepAll: false, 
-               reportDir: 'applications/mbed-clitest/log/', 
-               reportFiles: 'result_6lp_smoke.html, result_thread_smoke.html', 
-               reportName: 'Test Results'])
-  
-  // Publish JUnit test result report
-  step([$class: 'JUnitResultArchiver', testResults: 'applications/mbed-clitest/log/result.junit*.xml'])
-  
-  
-  // This version of plugin currently only on AWS test Jenkins
-  /*
-  step([$class: 'TextFinderPublisher', 
-    fileSet: 'applications/mbed-clitest/log/result*.html', 
-    regexp: 'fail<', 
-    alsoCheckConsoleOutput: false, 
-    succeedIfFound: false, 
-    unstableIfFound: true
- ])
-*/  
-  // This version of plugin currently only on AWS test Jenkins
-  /*
-  step([$class: 'CppcheckPublisher', 
-    pattern: 'applications/nanostack/cppcheck.xml', 
-    allowNoReport: true, ignoreBlankFiles: false,
-    threshold: "", newThreshold: "",
-    failureThreshold: "", newFailureThreshold: "",
-    healthy: "", unHealthy: "",
-    severityError: true, severityWarning: true,
-    severityStyle: true, severityPerformance: true,
-    severityInformation: true, severityNoCategory: true,
-    severityPortability: true,
-    xSize: 500, ySize: 200, numBuildsInGraph: 10,
-    displayAllErrors: true,
-    displayErrorSeverity: false, displayWarningSeverity: false,
-    displayStyleSeverity: false, displayPerformanceSeverity: false,
-    displayInformationSeverity: false, displayNoCategorySeverity: false,
-    displayPortabilitySeverity: false
-  ])
-  */
-  
-  // This version of plugin currently only on AWS test Jenkins
-  /*
-  step([$class: 'ValgrindPublisher', 
-    pattern: "applications/mbed-clitest/log/*valgrind*.xml",
-    failThresholdInvalidReadWrite: "",
-    failThresholdDefinitelyLost: "",
-    failThresholdTotal: "",
-    unstableThresholdInvalidReadWrite: "",
-    unstableThresholdDefinitelyLost: "8",
-    unstableThresholdTotal: "",
-    publishResultsForAbortedBuilds: true,
-    publishResultsForFailedBuilds: true,
-    failBuildOnMissingReports: false,
-    failBuildOnInvalidReports: false
-  ])    
-  */
-}

README.md

@@ -7,9 +7,9 @@ This repository contains the ARM IPv6/6LoWPAN/Thread Stack for mbed OS.
 
 mbed OS is now a Thread Certified Component. Using IPv6 with 6LoWPAN as the foundation, Thread technology provides a low-power, self-healing mesh network designed for the home.
 
-The documentation is hosted in http://docs.mbed.com/projects/arm-ipv66lowpan-stack/
+The documentation is hosted in [here](https://os.mbed.com/docs/v5.6/tutorials/6lowpan-mesh.html).
 
-On mbed OS, usage is through [mbed Mesh API](https://docs.mbed.com/docs/mbed-os-api-reference/en/latest/APIs/communication/mesh/) and [Socket API](https://docs.mbed.com/docs/mbed-os-api-reference/en/latest/APIs/communication/network_sockets/).
+On mbed OS, usage is through [mbed Mesh API](https://os.mbed.com/docs/v5.6/reference/mesh.html) and [Socket API](https://os.mbed.com/docs/v5.6/reference/network-socket.html).
 
 To see, how the 6LoWPAN Stack works, check the example application [mbed-os-example-mesh-minimal](https://github.com/ARMmbed/mbed-os-example-mesh-minimal).
 

run_unit_tests.sh

@@ -1,15 +1,16 @@
 #!/bin/bash
-# Copyright (c) 2015 ARM Limited. All rights reserved.
+# Copyright (c) 2015-2017, Arm Limited and affiliates.
 # SPDX-License-Identifier: Apache-2.0
-# Licensed under the Apache License, Version 2.0 (the License); you may
-# not use this file except in compliance with the License.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
-# * http://www.apache.org/licenses/LICENSE-2.0
+#     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an AS IS BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 

source/configs/ethernet_host.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2016 ARM. All rights reserved.
+ * Copyright (c) 2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 

source/configs/generic.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2014 ARM. All rights reserved.
+ * Copyright (c) 2014, 2016-2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 #include "base/thread_border_router.cfg"

source/configs/lowpan_border_router.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 #include "base/lowpan_border_router.cfg"

source/configs/lowpan_border_router_rf_tunnel.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 /*  This is for linux router which use RF tunnel interface */
 #include "base/lowpan_border_router.cfg"

source/configs/lowpan_border_router_rf_tunnel_ecc.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 /*  This is for linux router which use RF tunnel interface */
 #include "base/lowpan_border_router.cfg"

source/configs/lowpan_border_router_rf_tunnel_ecc_release.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 /*  This is for linux router which use RF tunnel interface */
 #include "base/lowpan_border_router.cfg"

source/configs/lowpan_host.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 

source/configs/lowpan_router.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 

source/configs/lowpan_router_ecc.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 

source/configs/lowpan_router_ecc_release.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015 ARM. All rights reserved.
+ * Copyright (c) 2015-2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 

source/configs/nanostack_full.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2014-2016 ARM. All rights reserved.
+ * Copyright (c) 2014-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 /*

source/configs/nanostack_full_debug.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015-2016 ARM. All rights reserved.
+ * Copyright (c) 2015-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 #include "nanostack_full.cfg"

source/configs/thread_border_router.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015-2016 ARM. All rights reserved.
+ * Copyright (c) 2015-2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 #include "base/thread_border_router.cfg"

source/configs/thread_end_device.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2016 ARM. All rights reserved.
+ * Copyright (c) 2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 #include "base/thread_end_device.cfg"

source/configs/thread_full_end_device.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2016 ARM. All rights reserved.
+ * Copyright (c) 2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 #include "base/thread_full_end_device.cfg"

source/configs/thread_router.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2015-2016 ARM. All rights reserved.
+ * Copyright (c) 2015-2016, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 #include "base/thread_router.cfg"

source/configs/thread_thci.cfg

@@ -1,5 +1,18 @@
 /*
- * Copyright (c) 2016 ARM. All rights reserved.
+ * Copyright (c) 2016-2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 
 /* Thread test harness configuration, derived from thread_border_router to get all thread features */

test/nanostack/unittest/stub/thread_discovery_stub.c

@@ -14,9 +14,6 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
-/*
- * Copyright (c) 2016 ARM Limited. All rights reserved.
- */
 
 #include "nsconfig.h"
 #ifdef HAVE_THREAD

xsl_script.sh

@@ -1,6 +1,19 @@
 #!/bin/bash
 
-# Copyright (c) 2015 ARM Limited. All rights reserved.
+# Copyright (c) 2015-2017, Arm Limited and affiliates.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 echo 
 echo "Creating report"
@@ -21,4 +34,4 @@ echo '</list>' >> results/index.xml
 
 echo
 echo "Report created to results/index.xml (outputs html)"
-echo
+echo