Merge pull request #4640 from chrissnow/xDot-Bootloader

STM32L1 Flash API and xDot bootloader support

targets/TARGET_STM/TARGET_STM32L1/TARGET_XDOT_L151CC/device/TOOLCHAIN_ARM_MICRO/stm32l151rc.sct

@@ -1,3 +1,4 @@
+#! armcc -E
 ; Scatter-Loading Description File
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ; Copyright (c) 2015, STMicroelectronics
@@ -27,10 +28,19 @@
 ; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
-; STM32L151RC: 256KB FLASH + 32KB SRAM
-LR_IROM1 0x08000000 0x40000  {    ; load region size_region
+#if !defined(MBED_APP_START)
+  #define MBED_APP_START 0x08000000
+#endif
 
-  ER_IROM1 0x08000000 0x40000  {  ; load address = execution address
+#if !defined(MBED_APP_SIZE)
+  #define MBED_APP_SIZE 0x40000
+#endif
+
+
+; STM32L151RC: 256KB FLASH + 32KB SRAM
+LR_IROM1 MBED_APP_START MBED_APP_SIZE  {    ; load region size_region
+
+  ER_IROM1 MBED_APP_START MBED_APP_SIZE  {  ; load address = execution address
    *.o (RESET, +First)
    *(InRoot$$Sections)
    .ANY (+RO)

targets/TARGET_STM/TARGET_STM32L1/TARGET_XDOT_L151CC/device/TOOLCHAIN_ARM_STD/stm32l151rc.sct

@@ -1,3 +1,4 @@
+#! armcc -E
 ; Scatter-Loading Description File
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ; Copyright (c) 2015, STMicroelectronics
@@ -27,10 +28,19 @@
 ; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
-; STM32L151RC: 256KB FLASH + 32KB SRAM
-LR_IROM1 0x08000000 0x40000  {    ; load region size_region
+#if !defined(MBED_APP_START)
+  #define MBED_APP_START 0x08000000
+#endif
 
-  ER_IROM1 0x08000000 0x40000  {  ; load address = execution address
+#if !defined(MBED_APP_SIZE)
+  #define MBED_APP_SIZE 0x40000
+#endif
+
+
+; STM32L151RC: 256KB FLASH + 32KB SRAM
+LR_IROM1 MBED_APP_START MBED_APP_SIZE  {    ; load region size_region
+
+  ER_IROM1 MBED_APP_START MBED_APP_SIZE  {  ; load address = execution address
    *.o (RESET, +First)
    *(InRoot$$Sections)
    .ANY (+RO)

targets/TARGET_STM/TARGET_STM32L1/TARGET_XDOT_L151CC/device/TOOLCHAIN_GCC_ARM/STM32L151XC.ld

@@ -1,11 +1,17 @@
 /* Linker script to configure memory regions. */
+#if !defined(MBED_APP_START)
+  #define MBED_APP_START 0x08000000
+#endif
 
+#if !defined(MBED_APP_SIZE)
+  #define MBED_APP_SIZE 256k
+#endif
 MEMORY
 {
   /* 256KB FLASH, 32KB RAM, Reserve up till 0x13C. There are 0x73 vectors = 292
    * bytes (0x124) in RAM. But all GCC scripts seem to require BootRAM @0x138
    */
-  FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256k
+  FLASH (rx) : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE
   RAM (rwx) : ORIGIN = 0x2000013C, LENGTH = 0x8000-0x13C
 }
 

targets/TARGET_STM/TARGET_STM32L1/TARGET_XDOT_L151CC/device/TOOLCHAIN_IAR/stm32l152xc.icf

@@ -1,7 +1,9 @@
+if (!isdefinedsymbol(MBED_APP_START)) { define symbol MBED_APP_START = 0x08000000; }
+if (!isdefinedsymbol(MBED_APP_SIZE)) { define symbol MBED_APP_SIZE = 0x40000; }
 /* [ROM = 256kb = 0x40000] */
-define symbol __intvec_start__     = 0x08000000;
-define symbol __region_ROM_start__ = 0x08000000;
-define symbol __region_ROM_end__   = 0x0803FFFF;
+define symbol __intvec_start__     = MBED_APP_START;
+define symbol __region_ROM_start__ = MBED_APP_START;
+define symbol __region_ROM_end__   = MBED_APP_START + MBED_APP_SIZE - 1;
 
 /* [RAM = 32kb = 0x8000] Vector table dynamic copy: 73 vectors = 292 bytes (0x124) to be reserved in RAM */
 define symbol __NVIC_start__          = 0x20000000;

targets/TARGET_STM/TARGET_STM32L1/TARGET_XDOT_L151CC/device/system_stm32l1xx.c

@@ -203,11 +203,25 @@ void SystemInit (void)
 #ifdef DATA_IN_ExtSRAM
   SystemInit_ExtMemCtl(); 
 #endif /* DATA_IN_ExtSRAM */
-    
+ 
+
+#if defined(__ICCARM__)
+    #pragma section=".intvec"
+    #define FLASH_VTOR_BASE   ((uint32_t)__section_begin(".intvec"))
+#elif defined(__CC_ARM)
+    extern uint32_t Load$$LR$$LR_IROM1$$Base[];
+    #define FLASH_VTOR_BASE   ((uint32_t)Load$$LR$$LR_IROM1$$Base)
+#elif defined(__GNUC__)
+        extern uint32_t g_pfnVectors[];
+    #define FLASH_VTOR_BASE   ((uint32_t)g_pfnVectors)
+#else
+    #error "Flash vector address not set for this toolchain"
+#endif
+
 #ifdef VECT_TAB_SRAM
   SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
 #else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+  SCB->VTOR = FLASH_VTOR_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
 #endif
 
 }

targets/TARGET_STM/TARGET_STM32L1/common_objects.h

@@ -110,6 +110,11 @@ struct i2c_s {
 #endif
 };
 
+struct flash_s {
+    /*  nothing to be stored for now */
+    uint32_t dummy;
+};
+
 struct dac_s {
     DACName dac;
     PinName pin;

targets/TARGET_STM/TARGET_STM32L1/flash_api.c

@@ -0,0 +1,143 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "flash_api.h"
+#include "mbed_critical.h"
+
+#if DEVICE_FLASH
+#include "mbed_assert.h"
+#include "cmsis.h"
+
+/*  L1 targets embed 16 pages sectors */
+#define NUM_PAGES_IN_SECTOR 16
+
+int32_t flash_init(flash_t *obj)
+{
+    /* Unlock the Flash to enable the flash control register access *************/
+    HAL_FLASH_Unlock();
+    return 0;
+}
+
+int32_t flash_free(flash_t *obj)
+{
+    /* Lock the Flash to disable the flash control register access (recommended
+     * to protect the FLASH memory against possible unwanted operation) *********/
+    HAL_FLASH_Lock();
+    return 0;
+}
+
+int32_t flash_erase_sector(flash_t *obj, uint32_t address)
+{
+    uint32_t FirstPage = 0;
+    uint32_t PAGEError = 0;
+    FLASH_EraseInitTypeDef EraseInitStruct;
+
+    if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) {
+
+        return -1;
+    }
+
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPTVERR | FLASH_FLAG_EOP | FLASH_FLAG_PGAERR | FLASH_FLAG_WRPERR);
+    /* MBED HAL erases 1 sector at a time */
+    /* Fill EraseInit structure*/
+    EraseInitStruct.TypeErase   = FLASH_TYPEERASE_PAGES;
+    EraseInitStruct.PageAddress = address;
+    EraseInitStruct.NbPages     = NUM_PAGES_IN_SECTOR;
+
+    /* Note: If an erase operation in Flash memory also concerns data in the data or instruction cache,
+     you have to make sure that these data are rewritten before they are accessed during code
+     execution. If this cannot be done safely, it is recommended to flush the caches by setting the
+     DCRST and ICRST bits in the FLASH_CR register. */
+
+    if (HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError) != HAL_OK) {
+        return -1;
+    } else {
+        return 0;
+    }
+}
+
+int32_t flash_program_page(flash_t *obj, uint32_t address,
+        const uint8_t *data, uint32_t size)
+{
+    uint32_t StartAddress = 0;
+
+    if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) {
+        return -1;
+    }
+
+    if ((size % 4) != 0) {
+        /* L1 flash devices can only be programmed 32bits/4 bytes at a time */
+        return -1;
+    }
+
+    /* Program the user Flash area word by word */
+    StartAddress = address;
+
+    /*  HW needs an aligned address to program flash, which data
+     *  parameters doesn't ensure  */
+    if ((uint32_t) data % 4 != 0) {
+        volatile uint32_t data32;
+        while (address < (StartAddress + size)) {
+            for (uint8_t i =0; i < 4; i++) {
+                *(((uint8_t *) &data32) + i) = *(data + i);
+            }
+
+            if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, address, data32) == HAL_OK) {
+                address = address + 4;
+                data = data + 4;
+            } else {
+                return -1;
+            }
+        }
+    } else { /*  case where data is aligned, so let's avoid any copy */
+        while (address < (StartAddress + size)) {
+            if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, address, *((uint32_t*) data)) == HAL_OK) {
+                address = address + 4;
+                data = data + 4;
+            } else {
+                return -1;
+            }
+        }
+    }
+
+    return 0;
+}
+
+uint32_t flash_get_sector_size(const flash_t *obj, uint32_t address) 
+{
+    if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) {
+        return MBED_FLASH_INVALID_SIZE;
+    } else {
+        return (NUM_PAGES_IN_SECTOR * FLASH_PAGE_SIZE);
+    }
+}
+
+uint32_t flash_get_page_size(const flash_t *obj)
+{
+    return FLASH_PAGE_SIZE;
+}
+
+uint32_t flash_get_start_address(const flash_t *obj) 
+{
+    return FLASH_BASE;
+}
+
+uint32_t flash_get_size(const flash_t *obj) 
+{
+    return FLASH_SIZE;
+}
+
+#endif

targets/targets.json

@@ -1408,9 +1408,10 @@
         "default_toolchain": "ARM",
         "extra_labels_add": ["STM32L1", "STM32L151CC"],
         "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
-        "device_has_add": ["ANALOGOUT"],
+        "device_has_add": ["ANALOGOUT", "FLASH"],
         "release_versions": ["5"],
-        "device_name": "STM32L151CC"
+        "device_name": "STM32L151CC",
+        "bootloader_supported": true
     },
     "MOTE_L152RC": {
         "inherits": ["FAMILY_STM32"],