SERIAL_FC disabled, critical section API Updation

SERIAL_FC disabled, critical section API and Format changes updated

targets/TARGET_TOSHIBA/TARGET_TMPM066/device.h

@@ -19,6 +19,6 @@
 #define DEVICE_ID_LENGTH    32
 
 #include "objects.h"
-#include "stddef.h"
+#include <stddef.h>
 
 #endif

targets/TARGET_TOSHIBA/TARGET_TMPM066/gpio_irq_api.c

@@ -13,11 +13,11 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
-#include "string.h"
 #include "gpio_irq_api.h"
 #include "mbed_error.h"
 #include "PeripheralNames.h"
 #include "pinmap.h"
+#include "mbed_critical.h"
 
 #define CHANNEL_NUM        6
 
@@ -103,19 +103,13 @@ int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32
 {
     // Get gpio interrupt ID
     obj->irq_id = pinmap_peripheral(pin, PinMap_GPIO_IRQ);
-
+    core_util_critical_section_enter();
-    // Disable interrupt by CPU
-    __set_PRIMASK(1);
-
     // Get pin mask
     obj->mask = (uint32_t)(1 << (pin & 0x07));
-
     // Get GPIO port
     obj->port = (GPIO_Port)(pin >> 3);
-
     // Set pin level as LOW
     GPIO_WriteDataBit(obj->port, obj->mask, 0);
-
     // Enable gpio interrupt function
     pinmap_pinout(pin, PinMap_GPIO_IRQ);
 
@@ -145,21 +139,15 @@ int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32
 
     // Save irq handler
     hal_irq_handler[obj->irq_src] = handler;
-
     // Save irq id
     channel_ids[obj->irq_src] = id;
-
     // Initialize interrupt event as both edges detection
     obj->event = INTIFAO_INT_ACTIVE_STATE_INVALID;
-
     // Set interrupt event and enable INTx clear
     INTIFAO_SetSTBYReleaseINTSrc(obj->irq_src, (INTIFAO_INTActiveState)obj->event, ENABLE);
-
     // Clear gpio pending interrupt
     NVIC_ClearPendingIRQ((IRQn_Type)obj->irq_id);
-
+    core_util_critical_section_exit();;
-    // Enable gpio interrupt
-    __set_PRIMASK(0);
 
     return 0;
 }

targets/TARGET_TOSHIBA/TARGET_TMPM066/gpio_object.h

@@ -30,7 +30,7 @@ typedef struct {
 
 static inline int gpio_is_connected(const gpio_t *obj)
 {
-    return obj->pin != (PinName)NC;
+    return (obj->pin != (PinName)NC);
 }
 
 #ifdef __cplusplus

targets/TARGET_TOSHIBA/TARGET_TMPM066/i2c_api.c

@@ -20,8 +20,12 @@
 
 #define I2C_NACK                (0)
 #define I2C_ACK                 (1)
-#define I2C_TIMEOUT      (100000)
+#define I2C_NO_DATA             (0)
+#define I2C_READ_ADDRESSED      (1)
+#define I2C_WRITE_GENERAL       (2)
+#define I2C_WRITE_ADDRESSED     (3)
 #define SELF_ADDR               (0xE0)
+#define I2C_TIMEOUT             (100000)
 
 static const PinMap PinMap_I2C_SDA[] = {
     {PC1, I2C_0, PIN_DATA(1, 2)},
@@ -153,7 +157,6 @@ int i2c_stop(i2c_t *obj)
 void i2c_reset(i2c_t *obj)
 {
     I2C_SWReset(obj->i2c);
-    return;
 }
 
 int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
@@ -265,14 +268,6 @@ int i2c_byte_write(i2c_t *obj, int data)
     return (result);
 }
 
-
-#if DEVICE_I2CSLAVE
-
-#define I2C_NO_DATA             (0)
-#define I2C_READ_ADDRESSED      (1)
-#define I2C_WRITE_GENERAL       (2)
-#define I2C_WRITE_ADDRESSED     (3)
-
 void i2c_slave_mode(i2c_t *obj, int enable_slave)
 {
     i2c_reset(obj);
@@ -293,7 +288,6 @@ void i2c_slave_mode(i2c_t *obj, int enable_slave)
     I2C_Init(obj->i2c, &obj->myi2c);
 }
 
-
 int i2c_slave_receive(i2c_t *obj)
 {
     int32_t result = I2C_NO_DATA;
@@ -347,15 +341,3 @@ void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
     obj->address = address & 0xFE;
     i2c_slave_mode(obj, 1);
 }
-
-#endif
-
-void INTI2C0_IRQHandler(void)
-{
-
-}
-
-void INTI2C1_IRQHandler(void)
-{
-
-}

targets/TARGET_TOSHIBA/TARGET_TMPM066/serial_api.c

@@ -18,7 +18,7 @@
 #include "PeripheralNames.h"
 #include "pinmap.h"
 
-#define UART_NUM              6
+#define UART_NUM              2
 
 static const PinMap PinMap_UART_TX[] = {
     {PC2, SERIAL_0, PIN_DATA(1, 1)},
@@ -239,15 +239,3 @@ void serial_pinout_tx(PinName tx)
 {
     pinmap_pinout(tx, PinMap_UART_TX);
 }
-
-void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow)
-{
-}
-
-void serial_break_set(serial_t *obj)
-{
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}

targets/TARGET_TOSHIBA/TARGET_TMPM066/us_ticker.c

@@ -24,7 +24,7 @@ static uint8_t us_ticker_inited = 0;  // Is ticker initialized yet?
 static volatile uint32_t acc_us_ticker = 0;
 
 // 16Bb high timer counter
-static uint32_t us_ticker_16h = 0;
+static volatile uint32_t us_ticker_16h = 0;
 
 void INT16A0_IRQHandler(void)
 {
@@ -57,11 +57,10 @@ void us_ticker_init(void)
     NVIC_EnableIRQ(INT16A0_IRQn);
     // Match counter set to max value
     TSB_T16A0->RG = TMR16A_100US;
-    // TSB_T16A0->CP = 0x00;
     TSB_T16A0->RUN = TMR16A_RUN;
 }
 
-uint32_t us_ticker_read()
+uint32_t us_ticker_read(void)
 {
     uint32_t ret_val = 0;
 

targets/targets.json

@@ -3356,7 +3356,7 @@
         "extra_labels": ["TOSHIBA"],
         "macros": ["__TMPM066__", "CMSIS_VECTAB_VIRTUAL", "CMSIS_VECTAB_VIRTUAL_HEADER_FILE=\"cmsis_nvic.h\""],
         "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
-        "device_has": ["ANALOGIN", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SLEEP", "I2C", "I2CSLAVE", "STDIO_MESSAGES", "PWMOUT"],
+        "device_has": ["ANALOGIN", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "I2C", "I2CSLAVE", "STDIO_MESSAGES", "PWMOUT"],
         "device_name": "TMPM066FWUG",
         "detect_code": ["7011"],
         "release_versions": ["5"]