Merge pull request #1641 from dbestm/dev_xxx_F0xx_rtc

[XXX_F0XX] enhance RTC API

libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_conf.h

@@ -147,7 +147,7 @@
 #endif /* LSE_VALUE */     
 
 #if !defined  (LSE_STARTUP_TIMEOUT)
- #define LSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for LSE start up, in ms */
+ #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/device.h

@@ -48,6 +48,7 @@
 #define DEVICE_SPISLAVE         1
 
 #define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          0
 
 #define DEVICE_PWMOUT           1
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/device.h

@@ -48,6 +48,7 @@
 #define DEVICE_SPISLAVE         1
 
 #define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          0
 
 #define DEVICE_PWMOUT           1
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/device.h

@@ -48,6 +48,7 @@
 #define DEVICE_SPISLAVE         1
 
 #define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          1
 
 #define DEVICE_PWMOUT           1
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F042K6/device.h

@@ -48,6 +48,7 @@
 #define DEVICE_SPISLAVE         1
 
 #define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          1
 
 #define DEVICE_PWMOUT           1
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/device.h

@@ -48,6 +48,7 @@
 #define DEVICE_SPISLAVE         1
 
 #define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          0
 
 #define DEVICE_PWMOUT           1
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/device.h

@@ -48,6 +48,7 @@
 #define DEVICE_SPISLAVE         1
 
 #define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          0
 
 #define DEVICE_PWMOUT           1
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/device.h

@@ -48,6 +48,7 @@
 #define DEVICE_SPISLAVE         1
 
 #define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          0
 
 #define DEVICE_PWMOUT           1
 

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/rtc_api.c

@@ -33,7 +33,9 @@
 
 #include "mbed_error.h"
 
+#if DEVICE_RTC_LSI
 static int rtc_inited = 0;
+#endif
 
 static RTC_HandleTypeDef RtcHandle;
 
@@ -41,11 +43,27 @@ void rtc_init(void) {
     RCC_OscInitTypeDef RCC_OscInitStruct;
     uint32_t rtc_freq = 0;
 
+#if DEVICE_RTC_LSI
     if (rtc_inited) return;
     rtc_inited = 1;
+#endif
 
     RtcHandle.Instance = RTC;
 
+#if !DEVICE_RTC_LSI
+    // Enable LSE Oscillator
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+    RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+    RCC_OscInitStruct.LSEState       = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
+    RCC_OscInitStruct.LSIState       = RCC_LSI_OFF;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { // Check if LSE has started correctly
+        // Connect LSE to RTC
+        __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
+        rtc_freq = LSE_VALUE;
+    } else {
+	    error("Cannot initialize RTC with LSE\n");
+    }
+#else
     // Enable Power clock
     __PWR_CLK_ENABLE();
 
@@ -56,31 +74,19 @@ void rtc_init(void) {
     __HAL_RCC_BACKUPRESET_FORCE();
     __HAL_RCC_BACKUPRESET_RELEASE();
 	
-    // Enable LSE Oscillator
-    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
-    RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
-    RCC_OscInitStruct.LSEState       = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
-    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
-        // Connect LSE to RTC
-        __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
-        rtc_freq = LSE_VALUE;
-    } else {
 	// Enable LSI clock
 	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
 	RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
 	RCC_OscInitStruct.LSEState       = RCC_LSE_OFF;
 	RCC_OscInitStruct.LSIState       = RCC_LSI_ON;
 	if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
-            error("RTC error: LSI clock initialization failed.");
+		error("Cannot initialize RTC with LSI\n");
 	}
 	// Connect LSI to RTC
 	__HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
 	// This value is LSI typical value. To be measured precisely using a timer input capture for example.
 	rtc_freq = LSI_VALUE;
-    }
-
-    // Check if RTC is already initialized
-    if ((RTC->ISR & RTC_ISR_INITS) ==  RTC_ISR_INITS) return;
+#endif
 
     // Enable RTC
     __HAL_RCC_RTC_ENABLE();
@@ -98,6 +104,7 @@ void rtc_init(void) {
 }
 
 void rtc_free(void) {
+#if DEVICE_RTC_LSI
     // Enable Power clock
     __PWR_CLK_ENABLE();
 
@@ -110,6 +117,7 @@ void rtc_free(void) {
 
     // Disable access to Backup domain
     HAL_PWR_DisableBkUpAccess();
+#endif
 
     // Disable LSI and LSE clocks
     RCC_OscInitTypeDef RCC_OscInitStruct;
@@ -119,11 +127,21 @@ void rtc_free(void) {
     RCC_OscInitStruct.LSEState       = RCC_LSE_OFF;
     HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
+#if DEVICE_RTC_LSI
     rtc_inited = 0;
+#endif
 }
 
 int rtc_isenabled(void) {
+#if DEVICE_RTC_LSI
   return rtc_inited;
+#else
+  if ((RTC->ISR & RTC_ISR_INITS) ==  RTC_ISR_INITS) {
+    return 1;
+  } else {
+    return 0;
+  }
+#endif
 }
 
 /*