mirror of https://github.com/ARMmbed/mbed-os.git
Merge pull request #15012 from felser/MTS_DRAGONFLY_L496VG
Add platform MTS_DRAGONFLY_L496VGpull/15017/head
Martin Kojtal
GitHub
commit
513f581bce
|
|
@ -46,6 +46,9 @@
|
||||||
#undef QSPI_CMD_WRITE_DPI
|
#undef QSPI_CMD_WRITE_DPI
|
||||||
#undef QSPI_CMD_WRITE_QPI
|
#undef QSPI_CMD_WRITE_QPI
|
||||||
|
|
||||||
|
#elif defined(TARGET_MTS_DRAGONFLY_L496VG)
|
||||||
|
#include "MT25Q_config.h"
|
||||||
|
|
||||||
#elif defined(TARGET_NRF52840)
|
#elif defined(TARGET_NRF52840)
|
||||||
#if TARGET_EP_AGORA
|
#if TARGET_EP_AGORA
|
||||||
#include "NORDIC/EP_AGORA/flash_config.h"
|
#include "NORDIC/EP_AGORA/flash_config.h"
|
||||||
|
|
|
||||||
|
|
@ -164,7 +164,7 @@
|
||||||
},
|
},
|
||||||
"UNO_91H": {
|
"UNO_91H": {
|
||||||
"stdio-baud-rate": 115200
|
"stdio-baud-rate": 115200
|
||||||
},
|
},
|
||||||
"DISCO_L475VG_IOT01A": {
|
"DISCO_L475VG_IOT01A": {
|
||||||
"crash-capture-enabled": true,
|
"crash-capture-enabled": true,
|
||||||
"fatal-error-auto-reboot-enabled": true
|
"fatal-error-auto-reboot-enabled": true
|
||||||
|
|
|
||||||
|
|
@ -2,6 +2,7 @@
|
||||||
# SPDX-License-Identifier: Apache-2.0
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
add_subdirectory(TARGET_DISCO_L496AG EXCLUDE_FROM_ALL)
|
add_subdirectory(TARGET_DISCO_L496AG EXCLUDE_FROM_ALL)
|
||||||
|
add_subdirectory(TARGET_MTS_DRAGONFLY_L496VG EXCLUDE_FROM_ALL)
|
||||||
add_subdirectory(TARGET_NUCLEO_L496ZG EXCLUDE_FROM_ALL)
|
add_subdirectory(TARGET_NUCLEO_L496ZG EXCLUDE_FROM_ALL)
|
||||||
|
|
||||||
if(${MBED_TOOLCHAIN} STREQUAL "GCC_ARM")
|
if(${MBED_TOOLCHAIN} STREQUAL "GCC_ARM")
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
# Copyright (c) 2021 ARM Limited. All rights reserved.
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
add_library(mbed-mts-dragonfly-l496vg INTERFACE)
|
||||||
|
|
||||||
|
target_sources(mbed-mts-dragonfly-l496vg
|
||||||
|
INTERFACE
|
||||||
|
ONBOARD_QUECTEL_EG25.cpp
|
||||||
|
PeripheralPins.c
|
||||||
|
TargetInit.c
|
||||||
|
)
|
||||||
|
|
||||||
|
target_include_directories(mbed-mts-dragonfly-l496vg
|
||||||
|
INTERFACE
|
||||||
|
.
|
||||||
|
)
|
||||||
|
|
||||||
|
target_link_libraries(mbed-mts-dragonfly-l496vg INTERFACE mbed-stm32l496xg)
|
||||||
|
|
@ -0,0 +1,222 @@
|
||||||
|
/* mbed Microcontroller Library
|
||||||
|
* Copyright (c) 2018 ARM Limited
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||||
|
* you may not use this file except in compliance with the License.
|
||||||
|
* You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||||
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||||
|
* See the License for the specific language governing permissions and
|
||||||
|
* limitations under the License.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if MBED_CONF_NSAPI_PRESENT
|
||||||
|
|
||||||
|
#include "QUECTEL_EC2X.h"
|
||||||
|
#include "ONBOARD_QUECTEL_EG25.h"
|
||||||
|
#include "gpio_api.h"
|
||||||
|
#include "platform/mbed_thread.h"
|
||||||
|
#include "PinNames.h"
|
||||||
|
#include "drivers/BufferedSerial.h"
|
||||||
|
#include "CellularLog.h"
|
||||||
|
#include "mbed_wait_api.h"
|
||||||
|
|
||||||
|
using namespace mbed;
|
||||||
|
|
||||||
|
ONBOARD_QUECTEL_EG25::ONBOARD_QUECTEL_EG25(FileHandle *fh, PinName pwr, bool active_high, PinName rst) : QUECTEL_EC2X(fh, pwr, active_high, rst)
|
||||||
|
{
|
||||||
|
initialized = 0;
|
||||||
|
ls = new DigitalOut(LS_LED);
|
||||||
|
net_status = new InterruptIn(NET_STATUS);
|
||||||
|
}
|
||||||
|
|
||||||
|
nsapi_error_t ONBOARD_QUECTEL_EG25::hard_power_on()
|
||||||
|
{
|
||||||
|
onboard_modem_init();
|
||||||
|
return NSAPI_ERROR_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
nsapi_error_t ONBOARD_QUECTEL_EG25::hard_power_off()
|
||||||
|
{
|
||||||
|
onboard_modem_deinit();
|
||||||
|
return NSAPI_ERROR_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
nsapi_error_t ONBOARD_QUECTEL_EG25::soft_power_on()
|
||||||
|
{
|
||||||
|
// See base function description. This function is for power on but reset too.
|
||||||
|
onboard_modem_power_down();
|
||||||
|
onboard_modem_power_up();
|
||||||
|
return NSAPI_ERROR_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
nsapi_error_t ONBOARD_QUECTEL_EG25::soft_power_off()
|
||||||
|
{
|
||||||
|
onboard_modem_power_down();
|
||||||
|
return NSAPI_ERROR_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
CellularDevice *CellularDevice::get_target_default_instance()
|
||||||
|
{
|
||||||
|
static BufferedSerial serial(MDMTXD, MDMRXD, 115200);
|
||||||
|
#if DEVICE_SERIAL_FC
|
||||||
|
if (MDMRTS != NC && MDMCTS != NC) {
|
||||||
|
tr_debug("Modem flow control: RTS %d CTS %d", MDMRTS, MDMCTS);
|
||||||
|
serial.set_flow_control(SerialBase::RTSCTS, MDMRTS, MDMCTS);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
static ONBOARD_QUECTEL_EG25 device(&serial, MDMPWRON, 0, MDMRST);
|
||||||
|
return &device;
|
||||||
|
}
|
||||||
|
|
||||||
|
void ONBOARD_QUECTEL_EG25::press_power_button(int time_us)
|
||||||
|
{
|
||||||
|
gpio_t gpio;
|
||||||
|
gpio_init_inout(&gpio, MDMPWRON, PIN_OUTPUT, OpenDrainNoPull, 0);
|
||||||
|
wait_us(time_us);
|
||||||
|
gpio_init_inout(&gpio, MDMPWRON, PIN_INPUT, PullNone, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
void ONBOARD_QUECTEL_EG25::onboard_modem_init()
|
||||||
|
{
|
||||||
|
// PWRKEY/RADIO_ONOFF = output open drain
|
||||||
|
// RADIO_PWR = Enables the regulator. High = on. Has pulldown on board.
|
||||||
|
// RADIO_RESET/MDMRST = Reset the radio. Open drain or float.
|
||||||
|
// RADIO_STATUS/STATUS = input with pull up. Gets driven low when radio is on.
|
||||||
|
|
||||||
|
gpio_t gpio;
|
||||||
|
// Enable radio power regulator and buffer, configure RESET_N and PWR_ON.
|
||||||
|
gpio_init_inout(&gpio, RADIO_PWR, PIN_OUTPUT, PushPullNoPull, 1);
|
||||||
|
gpio_init_inout(&gpio, BUF_EN, PIN_OUTPUT, OpenDrainNoPull, 0);
|
||||||
|
// MDMRST and MDMPWRON get driven low via open drain.
|
||||||
|
gpio_init_inout(&gpio, MDMRST, PIN_INPUT, PullNone, 1);
|
||||||
|
gpio_init_inout(&gpio, MDMPWRON, PIN_INPUT, PullNone, 1);
|
||||||
|
gpio_init_in_ex(&gpio, RADIO_STATUS, PullUp);
|
||||||
|
// Quectel hardware design guide recommends >= 30ms from powered until
|
||||||
|
// PWRKEY(MDMPWRON) is pulled low.
|
||||||
|
wait_us(40000);
|
||||||
|
initialized = 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
void ONBOARD_QUECTEL_EG25::onboard_modem_deinit()
|
||||||
|
{
|
||||||
|
// Make sure to power down before removing power!
|
||||||
|
onboard_modem_power_down();
|
||||||
|
gpio_t gpio;
|
||||||
|
|
||||||
|
// Set all to inputs no pull. Let pull resistors do their thing. Allows
|
||||||
|
// for lowest power draw. Disable radio power regulator and buffer.
|
||||||
|
gpio_init_inout(&gpio, MDMRST, PIN_INPUT, PullNone, 1);
|
||||||
|
gpio_init_inout(&gpio, MDMPWRON, PIN_INPUT, PullNone, 1);
|
||||||
|
gpio_init_inout(&gpio, BUF_EN, PIN_INPUT, PullNone, 1);
|
||||||
|
gpio_init_inout(&gpio, RADIO_PWR, PIN_INPUT, PullNone, 0);
|
||||||
|
initialized = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
void ONBOARD_QUECTEL_EG25::link_status()
|
||||||
|
{
|
||||||
|
ls->write(net_status->read());
|
||||||
|
}
|
||||||
|
|
||||||
|
void ONBOARD_QUECTEL_EG25::onboard_modem_power_up()
|
||||||
|
{
|
||||||
|
// NET_STATUS = input. InterruptIn make LS LED follow.
|
||||||
|
// LS_LED = output. Follow NET_STATUS.
|
||||||
|
net_status->rise(callback(this,&ONBOARD_QUECTEL_EG25::link_status));
|
||||||
|
net_status->fall(callback(this,&ONBOARD_QUECTEL_EG25::link_status));
|
||||||
|
|
||||||
|
// Make sure the radio is initialized so it can be powered on.
|
||||||
|
if (!initialized){
|
||||||
|
onboard_modem_init();
|
||||||
|
}
|
||||||
|
|
||||||
|
gpio_t status;
|
||||||
|
gpio_init_in_ex(&status, RADIO_STATUS, PullUp);
|
||||||
|
|
||||||
|
int radio_off = gpio_read(&status);
|
||||||
|
// If radio is on, do nothing.
|
||||||
|
if (!radio_off) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Activate PWRKEY at least 500ms to turn on.
|
||||||
|
press_power_button(550000);
|
||||||
|
|
||||||
|
// Wait 10s for status to go low before retrying.
|
||||||
|
uint8_t timeout = 10;
|
||||||
|
do {
|
||||||
|
thread_sleep_for(1000);
|
||||||
|
radio_off = gpio_read(&status);
|
||||||
|
if(!timeout--){
|
||||||
|
press_power_button(550000);
|
||||||
|
timeout = 10;
|
||||||
|
}
|
||||||
|
} while (radio_off);
|
||||||
|
|
||||||
|
_at.lock();
|
||||||
|
|
||||||
|
_at.set_at_timeout(15000);
|
||||||
|
_at.resp_start();
|
||||||
|
_at.set_stop_tag("RDY");
|
||||||
|
bool rdy = _at.consume_to_stop_tag();
|
||||||
|
_at.set_stop_tag(OK);
|
||||||
|
|
||||||
|
_at.unlock();
|
||||||
|
if (rdy) {
|
||||||
|
tr_debug("Radio outputted RDY");
|
||||||
|
} else {
|
||||||
|
tr_debug("Radio did not output RDY within 15s.");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void ONBOARD_QUECTEL_EG25::onboard_modem_power_down()
|
||||||
|
{
|
||||||
|
gpio_t status;
|
||||||
|
gpio_init_in_ex(&status, RADIO_STATUS, PullUp);
|
||||||
|
// Need volatile so status check is not optimized out.
|
||||||
|
volatile int radio_off = gpio_read(&status);
|
||||||
|
// Do nothing if it's already off.
|
||||||
|
if (radio_off) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Make sure the I/O are properly initialized.
|
||||||
|
if (!initialized){
|
||||||
|
onboard_modem_init();
|
||||||
|
}
|
||||||
|
|
||||||
|
do {
|
||||||
|
// Activate PWRKEY for at least 650ms to turn off.
|
||||||
|
press_power_button(680000);
|
||||||
|
// Wait 40s for status to go high before resetting.
|
||||||
|
uint8_t timeout = 40;
|
||||||
|
do {
|
||||||
|
thread_sleep_for(1000);
|
||||||
|
radio_off = gpio_read(&status);
|
||||||
|
} while (!radio_off && timeout);
|
||||||
|
|
||||||
|
if (radio_off) {
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
onboard_modem_reset();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
while (!radio_off);
|
||||||
|
}
|
||||||
|
|
||||||
|
void ONBOARD_QUECTEL_EG25::onboard_modem_reset()
|
||||||
|
{
|
||||||
|
gpio_t gpio;
|
||||||
|
gpio_init_inout(&gpio, MDMRST, PIN_OUTPUT, OpenDrainNoPull, 0);
|
||||||
|
thread_sleep_for(500);
|
||||||
|
gpio_init_inout(&gpio, MDMRST, PIN_INPUT, PullNone, 1);
|
||||||
|
thread_sleep_for(100);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // MBED_CONF_NSAPI_PRESENT
|
||||||
|
|
@ -0,0 +1,49 @@
|
||||||
|
/* mbed Microcontroller Library
|
||||||
|
* Copyright (c) 2018 ARM Limited
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||||
|
* you may not use this file except in compliance with the License.
|
||||||
|
* You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||||
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||||
|
* See the License for the specific language governing permissions and
|
||||||
|
* limitations under the License.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef ONBOARD_QUECTEL_EG25_H
|
||||||
|
#define ONBOARD_QUECTEL_EG25_H
|
||||||
|
|
||||||
|
#include "QUECTEL_EC2X.h"
|
||||||
|
|
||||||
|
namespace mbed {
|
||||||
|
|
||||||
|
class ONBOARD_QUECTEL_EG25 : public QUECTEL_EC2X {
|
||||||
|
public:
|
||||||
|
ONBOARD_QUECTEL_EG25(FileHandle *fh, PinName pwr, bool active_high, PinName rst);
|
||||||
|
|
||||||
|
virtual nsapi_error_t hard_power_on();
|
||||||
|
virtual nsapi_error_t hard_power_off();
|
||||||
|
virtual nsapi_error_t soft_power_on();
|
||||||
|
virtual nsapi_error_t soft_power_off();
|
||||||
|
|
||||||
|
private:
|
||||||
|
uint8_t initialized;
|
||||||
|
DigitalOut* ls;
|
||||||
|
InterruptIn* net_status;
|
||||||
|
void link_status();
|
||||||
|
void press_power_button(int time_ms);
|
||||||
|
void onboard_modem_init();
|
||||||
|
void onboard_modem_deinit();
|
||||||
|
void onboard_modem_power_up();
|
||||||
|
void onboard_modem_power_down();
|
||||||
|
void onboard_modem_reset();
|
||||||
|
};
|
||||||
|
|
||||||
|
} // namespace mbed
|
||||||
|
|
||||||
|
#endif // ONBOARD_QUECTEL_EG25_H
|
||||||
|
|
@ -0,0 +1,350 @@
|
||||||
|
/* mbed Microcontroller Library
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2018, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "PeripheralPins.h"
|
||||||
|
#include "mbed_toolchain.h"
|
||||||
|
|
||||||
|
//==============================================================================
|
||||||
|
// Notes
|
||||||
|
//
|
||||||
|
// - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||||
|
// HW peripheral instances. You can use them the same way as any other "normal"
|
||||||
|
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
|
||||||
|
// pinout image on mbed.org.
|
||||||
|
//
|
||||||
|
// - The pins which are connected to other components present on the board have
|
||||||
|
// the comment "Connected to xxx". The pin function may not work properly in this
|
||||||
|
// case. These pins may not be displayed on the board pinout image on mbed.org.
|
||||||
|
// Please read the board reference manual and schematic for more information.
|
||||||
|
//
|
||||||
|
// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
|
||||||
|
// See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
|
||||||
|
//
|
||||||
|
//==============================================================================
|
||||||
|
|
||||||
|
|
||||||
|
//*** ADC ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_ADC[] = {
|
||||||
|
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||||
|
{PA_0_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||||||
|
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||||
|
{PA_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||||
|
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||||
|
{PA_2_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||||
|
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||||
|
{PA_3_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||||||
|
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||||
|
{PA_4_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||||
|
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||||
|
{PA_5_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||||
|
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||||
|
{PA_6_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||||
|
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||||
|
{PA_7_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 // Connected to QSPI_BK1_IO2 [MX25R6435FM2IL0_SIO2]
|
||||||
|
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||||
|
{PB_0_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||||||
|
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
|
||||||
|
{PB_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC2_IN16
|
||||||
|
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||||
|
{PC_0_ALT1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||||
|
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||||
|
{PC_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||||||
|
{PC_1_ALT1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||||
|
{PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||||
|
{PC_2_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||||
|
{PC_2_ALT1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||||||
|
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||||
|
{PC_3_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||||
|
{PC_3_ALT1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
|
||||||
|
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||||
|
{PC_4_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||||
|
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||||
|
{PC_5_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
|
||||||
|
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
|
||||||
|
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)},
|
||||||
|
{ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** DAC ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_DAC[] = {
|
||||||
|
{PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
|
||||||
|
{PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** I2C ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||||
|
{PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_7_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C4)},
|
||||||
|
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||||
|
{PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
{PC_1_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF2_I2C4)},
|
||||||
|
{PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||||
|
{PA_7, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_6_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C4)},
|
||||||
|
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||||
|
{PB_10_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C4)},
|
||||||
|
{PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||||
|
{PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
{PC_0_ALT0, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF2_I2C4)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** PWM ***
|
||||||
|
|
||||||
|
// TIM5 cannot be used because already used by the us_ticker
|
||||||
|
MBED_WEAK const PinMap PinMap_PWM[] = {
|
||||||
|
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||||
|
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PA_1_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
|
||||||
|
// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||||
|
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||||
|
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||||
|
{PA_3_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2
|
||||||
|
// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||||
|
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_5_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||||
|
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
{PA_6_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
|
||||||
|
{PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||||
|
{PA_7_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
{PA_7_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||||
|
{PA_7_ALT2, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
|
||||||
|
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||||
|
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||||
|
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||||
|
{PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||||
|
{PB_0_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||||
|
{PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||||
|
{PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||||
|
{PB_1_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||||
|
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
{PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||||
|
{PB_6_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
|
||||||
|
{PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||||
|
{PB_7_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
|
||||||
|
{PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||||
|
{PB_8_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
|
||||||
|
{PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||||
|
{PB_9_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
|
||||||
|
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||||
|
{PB_13_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
|
||||||
|
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||||
|
{PB_15_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||||
|
{PB_15_ALT1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2
|
||||||
|
{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||||
|
{PC_8_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||||
|
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||||
|
{PC_9_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
|
||||||
|
{PE_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** SERIAL ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_UART_TX[] = {
|
||||||
|
{PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_2_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_UART_RX[] = {
|
||||||
|
{PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_3_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
|
||||||
|
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
|
||||||
|
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_15, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{PA_15_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
{PB_1, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{PB_1_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PB_4, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||||
|
{PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
|
||||||
|
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_6, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{PA_6_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PB_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PB_5, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||||
|
{PB_7, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||||
|
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{PB_13_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
|
||||||
|
{PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** SPI ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||||
|
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PB_5_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||||
|
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{PC_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)},
|
||||||
|
{PD_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||||
|
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PB_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||||
|
{PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||||
|
{PA_1, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)},
|
||||||
|
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||||
|
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{PD_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||||
|
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||||
|
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PA_15_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||||
|
{PB_0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||||
|
{PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{PD_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** CAN ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_CAN_RD[] = {
|
||||||
|
{PB_5, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_CAN2)},
|
||||||
|
{PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
{PB_12, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_CAN2)},
|
||||||
|
{PD_0, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_CAN_TD[] = {
|
||||||
|
{PB_6, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_CAN2)},
|
||||||
|
{PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
{PB_13, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_CAN2)},
|
||||||
|
{PD_1, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** QUADSPI ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_QSPI_DATA0[] = {
|
||||||
|
{PB_1, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
|
||||||
|
{PE_12, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_QSPI_DATA1[] = {
|
||||||
|
{PB_0, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
|
||||||
|
{PE_13, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_QSPI_DATA2[] = {
|
||||||
|
{PA_7, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
|
||||||
|
{PE_14, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_QSPI_DATA3[] = {
|
||||||
|
{PA_6, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
|
||||||
|
{PE_15, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_QSPI_SCLK[] = {
|
||||||
|
{PA_3, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
|
||||||
|
{PE_10, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_QSPI_SSEL[] = {
|
||||||
|
{PA_2, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
|
||||||
|
{PE_11, QSPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** USBDEVICE ***
|
||||||
|
|
||||||
|
MBED_WEAK const PinMap PinMap_USB_FS[] = {
|
||||||
|
// {PA_8, USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||||
|
{PA_9, USB_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||||
|
// {PA_13, USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_NOE
|
||||||
|
// {PA_14, USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||||
|
// {PC_9, USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_NOE
|
||||||
|
{NC, NC, 0}
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,368 @@
|
||||||
|
/* mbed Microcontroller Library
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2016, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* MBED TARGET LIST: MTS_DRAGONFLY_L471QG */
|
||||||
|
|
||||||
|
#ifndef MBED_PINNAMES_H
|
||||||
|
#define MBED_PINNAMES_H
|
||||||
|
|
||||||
|
#include "cmsis.h"
|
||||||
|
#include "PinNamesTypes.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
ALT0 = 0x100,
|
||||||
|
ALT1 = 0x200,
|
||||||
|
ALT2 = 0x300,
|
||||||
|
} ALTx;
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
PA_0 = 0x00,
|
||||||
|
PA_0_ALT0 = PA_0 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_1 = 0x01,
|
||||||
|
PA_1_ALT0 = PA_1 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_2 = 0x02,
|
||||||
|
PA_2_ALT0 = PA_2 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_3 = 0x03,
|
||||||
|
PA_3_ALT0 = PA_3 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_4 = 0x04,
|
||||||
|
PA_4_ALT0 = PA_4 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_5 = 0x05,
|
||||||
|
PA_5_ALT0 = PA_5 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_6 = 0x06,
|
||||||
|
PA_6_ALT0 = PA_6 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_7 = 0x07,
|
||||||
|
PA_7_ALT0 = PA_7 | ALT0, // same pin used for alternate HW
|
||||||
|
PA_7_ALT1 = PA_7 | ALT1, // same pin used for alternate HW
|
||||||
|
PA_7_ALT2 = PA_7 | ALT2, // same pin used for alternate HW
|
||||||
|
PA_8 = 0x08,
|
||||||
|
PA_9 = 0x09,
|
||||||
|
PA_10 = 0x0A,
|
||||||
|
PA_11 = 0x0B,
|
||||||
|
PA_12 = 0x0C,
|
||||||
|
PA_13 = 0x0D,
|
||||||
|
PA_14 = 0x0E,
|
||||||
|
PA_15 = 0x0F,
|
||||||
|
PA_15_ALT0 = PA_15 | ALT0, // same pin used for alternate HW
|
||||||
|
|
||||||
|
PB_0 = 0x10,
|
||||||
|
PB_0_ALT0 = PB_0 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_0_ALT1 = PB_0 | ALT1, // same pin used for alternate HW
|
||||||
|
PB_1 = 0x11,
|
||||||
|
PB_1_ALT0 = PB_1 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_1_ALT1 = PB_1 | ALT1, // same pin used for alternate HW
|
||||||
|
PB_2 = 0x12,
|
||||||
|
PB_3 = 0x13,
|
||||||
|
PB_3_ALT0 = PB_3 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_4 = 0x14,
|
||||||
|
PB_4_ALT0 = PB_4 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_5 = 0x15,
|
||||||
|
PB_5_ALT0 = PB_5 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_6 = 0x16,
|
||||||
|
PB_6_ALT0 = PB_6 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_7 = 0x17,
|
||||||
|
PB_7_ALT0 = PB_7 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_8 = 0x18,
|
||||||
|
PB_8_ALT0 = PB_8 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_9 = 0x19,
|
||||||
|
PB_9_ALT0 = PB_9 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_10 = 0x1A,
|
||||||
|
PB_10_ALT0 = PB_10 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_11 = 0x1B,
|
||||||
|
PB_11_ALT0 = PB_11 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_12 = 0x1C,
|
||||||
|
PB_13 = 0x1D,
|
||||||
|
PB_13_ALT0 = PB_13 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_14 = 0x1E,
|
||||||
|
PB_14_ALT0 = PB_14 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_14_ALT1 = PB_14 | ALT1, // same pin used for alternate HW
|
||||||
|
PB_15 = 0x1F,
|
||||||
|
PB_15_ALT0 = PB_15 | ALT0, // same pin used for alternate HW
|
||||||
|
PB_15_ALT1 = PB_15 | ALT1, // same pin used for alternate HW
|
||||||
|
|
||||||
|
PC_0 = 0x20,
|
||||||
|
PC_0_ALT0 = PC_0 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_0_ALT1 = PC_0 | ALT1, // same pin used for alternate HW
|
||||||
|
PC_1 = 0x21,
|
||||||
|
PC_1_ALT0 = PC_1 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_1_ALT1 = PC_1 | ALT1, // same pin used for alternate HW
|
||||||
|
PC_2 = 0x22,
|
||||||
|
PC_2_ALT0 = PC_2 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_2_ALT1 = PC_2 | ALT1, // same pin used for alternate HW
|
||||||
|
PC_3 = 0x23,
|
||||||
|
PC_3_ALT0 = PC_3 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_3_ALT1 = PC_3 | ALT1, // same pin used for alternate HW
|
||||||
|
PC_4 = 0x24,
|
||||||
|
PC_4_ALT0 = PC_4 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_5 = 0x25,
|
||||||
|
PC_5_ALT0 = PC_5 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_6 = 0x26,
|
||||||
|
PC_6_ALT0 = PC_6 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_7 = 0x27,
|
||||||
|
PC_7_ALT0 = PC_7 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_8 = 0x28,
|
||||||
|
PC_8_ALT0 = PC_8 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_9 = 0x29,
|
||||||
|
PC_9_ALT0 = PC_9 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_10 = 0x2A,
|
||||||
|
PC_10_ALT0 = PC_10 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_11 = 0x2B,
|
||||||
|
PC_11_ALT0 = PC_11 | ALT0, // same pin used for alternate HW
|
||||||
|
PC_12 = 0x2C,
|
||||||
|
PC_13 = 0x2D,
|
||||||
|
PC_14 = 0x2E,
|
||||||
|
PC_15 = 0x2F,
|
||||||
|
|
||||||
|
PD_0 = 0x30,
|
||||||
|
PD_1 = 0x31,
|
||||||
|
PD_2 = 0x32,
|
||||||
|
PD_3 = 0x33,
|
||||||
|
PD_4 = 0x34,
|
||||||
|
PD_5 = 0x35,
|
||||||
|
PD_6 = 0x36,
|
||||||
|
PD_7 = 0x37,
|
||||||
|
PD_8 = 0x38,
|
||||||
|
PD_9 = 0x39,
|
||||||
|
PD_10 = 0x3A,
|
||||||
|
PD_11 = 0x3B,
|
||||||
|
PD_12 = 0x3C,
|
||||||
|
PD_13 = 0x3D,
|
||||||
|
PD_14 = 0x3E,
|
||||||
|
PD_15 = 0x3F,
|
||||||
|
|
||||||
|
PE_0 = 0x40,
|
||||||
|
PE_1 = 0x41,
|
||||||
|
PE_2 = 0x42,
|
||||||
|
PE_3 = 0x43,
|
||||||
|
PE_4 = 0x44,
|
||||||
|
PE_5 = 0x45,
|
||||||
|
PE_6 = 0x46,
|
||||||
|
PE_7 = 0x47,
|
||||||
|
PE_8 = 0x48,
|
||||||
|
PE_9 = 0x49,
|
||||||
|
PE_10 = 0x4A,
|
||||||
|
PE_11 = 0x4B,
|
||||||
|
PE_12 = 0x4C,
|
||||||
|
PE_13 = 0x4D,
|
||||||
|
PE_14 = 0x4E,
|
||||||
|
PE_15 = 0x4F,
|
||||||
|
|
||||||
|
PH_0 = 0x70,
|
||||||
|
PH_1 = 0x71,
|
||||||
|
|
||||||
|
// ADC internal channels
|
||||||
|
ADC_TEMP = 0xF0,
|
||||||
|
ADC_VREF = 0xF1,
|
||||||
|
ADC_VBAT = 0xF2,
|
||||||
|
|
||||||
|
#ifdef TARGET_FF_ARDUINO_UNO
|
||||||
|
ARDUINO_UNO_A0 = PC_2,
|
||||||
|
ARDUINO_UNO_A1 = PC_0,
|
||||||
|
ARDUINO_UNO_A2 = PC_4,
|
||||||
|
ARDUINO_UNO_A3 = PB_0,
|
||||||
|
ARDUINO_UNO_A4 = PC_1,
|
||||||
|
ARDUINO_UNO_A5 = PC_9,
|
||||||
|
ARDUINO_UNO_D0 = PA_3,
|
||||||
|
ARDUINO_UNO_D1 = PA_2,
|
||||||
|
ARDUINO_UNO_D2 = PB_15,
|
||||||
|
ARDUINO_UNO_D3 = PA_0,
|
||||||
|
ARDUINO_UNO_D4 = PA_7,
|
||||||
|
ARDUINO_UNO_D5 = PA_9,
|
||||||
|
ARDUINO_UNO_D6 = PA_1,
|
||||||
|
ARDUINO_UNO_D7 = PA_8,
|
||||||
|
ARDUINO_UNO_D8 = PB_1,
|
||||||
|
ARDUINO_UNO_D9 = PB_13,
|
||||||
|
ARDUINO_UNO_D10 = PC_8,
|
||||||
|
ARDUINO_UNO_D11 = PB_5,
|
||||||
|
ARDUINO_UNO_D12 = PA_6,
|
||||||
|
ARDUINO_UNO_D13 = PA_5,
|
||||||
|
ARDUINO_UNO_D14 = PB_9,
|
||||||
|
ARDUINO_UNO_D15 = PB_8,
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// 40 pin
|
||||||
|
IO_00 = ARDUINO_UNO_D1,
|
||||||
|
IO_01 = ARDUINO_UNO_D4,
|
||||||
|
IO_02 = ARDUINO_UNO_D8,
|
||||||
|
IO_03 = ARDUINO_UNO_D6,
|
||||||
|
IO_04 = ARDUINO_UNO_D11,
|
||||||
|
IO_05 = ARDUINO_UNO_D13,
|
||||||
|
IO_06 = ARDUINO_UNO_D15,
|
||||||
|
IO_07 = ARDUINO_UNO_D2,
|
||||||
|
IO_08 = ARDUINO_UNO_A0,
|
||||||
|
IO_09 = ARDUINO_UNO_A3,
|
||||||
|
IO_10 = ARDUINO_UNO_A1,
|
||||||
|
IO_11 = ARDUINO_UNO_A4,
|
||||||
|
IO_12 = ARDUINO_UNO_A2,
|
||||||
|
IO_13 = ARDUINO_UNO_D9,
|
||||||
|
IO_14 = ARDUINO_UNO_A5,
|
||||||
|
IO_15 = ARDUINO_UNO_D14,
|
||||||
|
IO_16 = ARDUINO_UNO_D12,
|
||||||
|
IO_17 = ARDUINO_UNO_D10,
|
||||||
|
IO_18 = ARDUINO_UNO_D3,
|
||||||
|
IO_19 = ARDUINO_UNO_D5,
|
||||||
|
IO_20 = ARDUINO_UNO_D7,
|
||||||
|
IO_21 = ARDUINO_UNO_D0,
|
||||||
|
|
||||||
|
// 40 pin USB debug port
|
||||||
|
CONSOLE_TX = PB_6,
|
||||||
|
CONSOLE_RX = PB_7,
|
||||||
|
|
||||||
|
// UARTS to external I/O
|
||||||
|
UART2_TX = ARDUINO_UNO_D1,
|
||||||
|
UART2_RX = ARDUINO_UNO_D0,
|
||||||
|
UART2_RTS = ARDUINO_UNO_D6,
|
||||||
|
UART2_CTS = ARDUINO_UNO_D3,
|
||||||
|
UART2_DSR = ARDUINO_UNO_D5,
|
||||||
|
UART2_DTR = ARDUINO_UNO_D7,
|
||||||
|
UART2_DCD = ARDUINO_UNO_D4,
|
||||||
|
UART2_RI = ARDUINO_UNO_D8,
|
||||||
|
|
||||||
|
UART1_TX = PB_6,
|
||||||
|
UART1_RX = PB_7,
|
||||||
|
UART1_RTS = PB_3,
|
||||||
|
UART1_CTS = PB_4,
|
||||||
|
|
||||||
|
// 40 pin JTAG/SWD
|
||||||
|
J_TCK = PA_14, // a.k.a. SWCLK
|
||||||
|
J_TDI = PA_15,
|
||||||
|
J_RST = PB_4,
|
||||||
|
J_TDO = PB_3, // a.k.a. SWO
|
||||||
|
J_TMS = PA_13, // a.k.a. SWDIO
|
||||||
|
|
||||||
|
// Exteranl serial port
|
||||||
|
SERIAL_TX = ARDUINO_UNO_D1,
|
||||||
|
SERIAL_RX = ARDUINO_UNO_D0,
|
||||||
|
SERIAL_RTS = ARDUINO_UNO_D6,
|
||||||
|
SERIAL_CTS = ARDUINO_UNO_D3,
|
||||||
|
SERIAL_DCD = ARDUINO_UNO_D4,
|
||||||
|
SERIAL_DSR = ARDUINO_UNO_D5,
|
||||||
|
SERIAL_DTR = ARDUINO_UNO_D7,
|
||||||
|
SERIAL_RI = ARDUINO_UNO_D8,
|
||||||
|
|
||||||
|
// SPI1 and SPI2 are available on Arduino pins
|
||||||
|
SPI1_MOSI = ARDUINO_UNO_D11,
|
||||||
|
SPI1_MISO = ARDUINO_UNO_D12,
|
||||||
|
SPI1_SCK = ARDUINO_UNO_D13,
|
||||||
|
SPI2_MOSI = ARDUINO_UNO_D2,
|
||||||
|
SPI2_MISO = ARDUINO_UNO_A0,
|
||||||
|
SPI2_SCK = ARDUINO_UNO_D9,
|
||||||
|
|
||||||
|
// QuadSPI connects to flash part
|
||||||
|
QSPI_FLASH1_SCK = PE_10,
|
||||||
|
QSPI_FLASH1_CSN = PE_11,
|
||||||
|
QSPI_FLASH1_IO0 = PE_12,
|
||||||
|
QSPI_FLASH1_IO1 = PE_13,
|
||||||
|
QSPI_FLASH1_IO2 = PE_14,
|
||||||
|
QSPI_FLASH1_IO3 = PE_15,
|
||||||
|
|
||||||
|
// I2C1 and I2C3 are available on Arduino pins
|
||||||
|
I2C1_SCL = ARDUINO_UNO_D15,
|
||||||
|
I2C1_SDA = ARDUINO_UNO_D14,
|
||||||
|
I2C2_SCL = PB_10,
|
||||||
|
I2C2_SDA = PB_14,
|
||||||
|
I2C3_SCL = ARDUINO_UNO_A1,
|
||||||
|
I2C3_SDA = ARDUINO_UNO_A4,
|
||||||
|
|
||||||
|
// Cellular radio (note: no DSR signal)
|
||||||
|
RADIO_PWR = PE_0,
|
||||||
|
RADIO_RESET = PE_1,
|
||||||
|
RADIO_TX = PD_8,
|
||||||
|
RADIO_RX = PD_9,
|
||||||
|
RADIO_RI = PD_10,
|
||||||
|
RADIO_CTS = PD_11,
|
||||||
|
RADIO_RTS = PD_12,
|
||||||
|
RADIO_DTR = PD_13,
|
||||||
|
RADIO_DCD = PD_14,
|
||||||
|
RADIO_ONOFF = PE_2,
|
||||||
|
RADIO_STATUS = PE_3,
|
||||||
|
AP_READY = PE_4,
|
||||||
|
RADIO_WAKEUP = PE_5,
|
||||||
|
NET_MODE = PD_3,
|
||||||
|
NET_STATUS = PD_2,
|
||||||
|
VRAD_ALERT = PB_2,
|
||||||
|
MON_1V8 = PC_5,
|
||||||
|
RADIO_VDD_EXT = MON_1V8,
|
||||||
|
|
||||||
|
MDMPWRON = RADIO_ONOFF, // 3G_ONOFF DragonFly Design Guide, Page No. 16
|
||||||
|
MDMRST = RADIO_RESET,
|
||||||
|
MDMTXD = RADIO_TX, // Transmit Data
|
||||||
|
MDMRXD = RADIO_RX, // Receive Data
|
||||||
|
MDMRTS = RADIO_RTS, // Request to Send
|
||||||
|
MDMCTS = RADIO_CTS, // Clear to Send
|
||||||
|
MDMDCD = RADIO_DCD, // Data Carrier Detect
|
||||||
|
MDMDTR = RADIO_DTR, // Data Terminal Ready
|
||||||
|
MDMRI = RADIO_RI, // Ring Indicator
|
||||||
|
|
||||||
|
// Power control for level shifter and SPI flash. Low powers on.
|
||||||
|
BUF_EN = PD_15,
|
||||||
|
VMEM_EN = PE_7,
|
||||||
|
|
||||||
|
// Voltage measuring
|
||||||
|
VCC_IN_MEAS_EN = PE_8,
|
||||||
|
VCC_IN_MEAS = PC_3,
|
||||||
|
|
||||||
|
INPUT_POWER = PC_7,
|
||||||
|
|
||||||
|
// GNSS/GPS
|
||||||
|
GPS_ANT_PWR_EN = PE_9,
|
||||||
|
|
||||||
|
// Wake up from Standby/Shutdown options are PA0 & PA2.
|
||||||
|
WAKEUP = ARDUINO_UNO_D3,
|
||||||
|
// Wake up build Options
|
||||||
|
STM_WKUP = PC_13,
|
||||||
|
|
||||||
|
// CAN
|
||||||
|
CAN_TX = ARDUINO_UNO_D14,
|
||||||
|
CAN_RX = ARDUINO_UNO_D15,
|
||||||
|
// build option
|
||||||
|
CAN1_TX = PD_1,
|
||||||
|
CAN1_RX = PD_0,
|
||||||
|
CAN2_RX = PB_12,
|
||||||
|
CAN2_TX = ARDUINO_UNO_D9,
|
||||||
|
|
||||||
|
LS_LED = PE_6,
|
||||||
|
|
||||||
|
// Not connected
|
||||||
|
NC = (int) 0xFFFFFFFF
|
||||||
|
} PinName;
|
||||||
|
|
||||||
|
// Standardized LED and button names
|
||||||
|
#define LED1 PA_0
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,30 @@
|
||||||
|
/* mbed Microcontroller Library
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
******************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (c) 2015-2021 STMicroelectronics.
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "stm32l4xx.h"
|
||||||
|
|
||||||
|
void TargetBSP_Init(void)
|
||||||
|
{
|
||||||
|
/* Enable the flash memory so greentea tests for QuadSPI work. */
|
||||||
|
/* The application can set it high to disable and save power. */
|
||||||
|
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_7;
|
||||||
|
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||||
|
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_7, GPIO_PIN_RESET);
|
||||||
|
}
|
||||||
|
|
@ -3955,6 +3955,25 @@
|
||||||
"0828"
|
"0828"
|
||||||
]
|
]
|
||||||
},
|
},
|
||||||
|
"MTS_DRAGONFLY_L496VG": {
|
||||||
|
"inherits": [
|
||||||
|
"MCU_STM32L496xG"
|
||||||
|
],
|
||||||
|
"supported_form_factors": [
|
||||||
|
"ARDUINO_UNO"
|
||||||
|
],
|
||||||
|
"components_add": [
|
||||||
|
"QSPIF"
|
||||||
|
],
|
||||||
|
"device_has_add": [
|
||||||
|
"USBDEVICE",
|
||||||
|
"QSPI"
|
||||||
|
],
|
||||||
|
"detect_code": [
|
||||||
|
"0313"
|
||||||
|
],
|
||||||
|
"device_name": "STM32L496VGTx"
|
||||||
|
},
|
||||||
"MCU_STM32L4R5xI": {
|
"MCU_STM32L4R5xI": {
|
||||||
"inherits": [
|
"inherits": [
|
||||||
"MCU_STM32L4"
|
"MCU_STM32L4"
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue