diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PeripheralNames.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PeripheralNames.h
new file mode 100644
index 0000000000..15a5c2bc7a
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PeripheralNames.h
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PB_6
+#define STDIO_UART_RX PB_7
+#define STDIO_UART UART_1
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PeripheralPins.c b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PeripheralPins.c
new file mode 100644
index 0000000000..7c2b21786f
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PeripheralPins.c
@@ -0,0 +1,212 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_ADC_Internal[] = {
+ {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used
+ {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
+ {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
+// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
+ {NC, NC, 0}
+};
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PinNames.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PinNames.h
new file mode 100644
index 0000000000..941228cae4
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PinNames.h
@@ -0,0 +1,230 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ // Not connected
+ NC = -1,
+
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // ADC internal channels
+ ADC_TEMP = 0xF0,
+ ADC_VREF = 0xF1,
+ ADC_VBAT = 0xF2,
+
+ // Module pins
+ // Defined based on the external pin (40-pin connector) alternate function mapping (Page 15 of MTQ-H5-B01 device guide)
+ // Device guide used: S000628,Version1.4
+ P_1 = PB_6,
+ P_2 = PA_14,
+ P_3 = PA_15,
+ P_4 = PB_4,
+ P_5 = NC,
+ P_6 = NC,
+ P_7 = NC,
+ P_8 = NC,
+ P_9 = PA_2,
+ P_10 = PA_7,
+ P_11 = PB_1,
+ P_12 = PA_1,
+ P_13 = NC,
+ P_14 = PB_5,
+ P_15 = PA_5,
+ P_16 = PB_8,
+ P_17 = PB_15,
+ P_18 = PC_2,
+ P_19 = PB_0,
+ P_20 = PC_0,
+ P_21 = PC_1,
+ P_22 = PC_4,
+ P_23 = PB_13,
+ P_24 = PC_9,
+ P_25 = PB_9,
+ P_26 = PA_6,
+ P_27 = PC_8,
+ P_28 = NC,
+ P_29 = PA_0,
+ P_30 = PA_9,
+ P_31 = PA_8,
+ P_32 = PA_3,
+ P_33 = NC,
+ P_34 = NC,
+ P_35 = NC,
+ P_36 = NC,
+ P_37 = NC,
+ P_38 = PB_3,
+ P_39 = PA_13,
+ P_40 = PB_7,
+
+ //DAPLink
+ USBTX = MBED_CONF_TARGET_USB_TX,
+ USBRX = MBED_CONF_TARGET_USB_RX,
+ SWDIO = PA_13,
+ SWCLK = PA_14,
+
+ I2C1_SCL = PB_8,
+ I2C1_SDA = PB_9,
+ I2C3_SCL = PA_8,
+ I2C3_SDA = PC_9,
+
+ I2C_SCL = I2C1_SCL,
+ I2C_SDA = I2C1_SDA,
+
+ SPI1_MOSI = PB_5,
+ SPI1_MISO = PA_6,
+ SPI1_SCK = PA_5,
+ SPI2_MOSI = PB_15,
+ SPI2_MISO = PC_2,
+ SPI2_SCK = PB_13,
+
+ SPI_MOSI = SPI1_MOSI,
+ SPI_MISO = SPI1_MISO,
+ SPI_SCK = SPI1_SCK,
+ SPI_CS1 = PA_3, //LCD CS
+ SPI_CS2 = PA_15, //SD Card CS
+
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ SERIAL_RTS = PA_0,
+ SERIAL_CTS = PA_1,
+ SERIAL_DCD = PA_7,
+ SERIAL_DSR = PA_9,
+ SERIAL_DTR = PA_8,
+ SERIAL_RI = PB_1,
+
+ WAKEUP = PA_0,
+
+ // Generic signals namings
+ LED1 = PA_7,
+ LED2 = PC_4,
+ LED3 = PB_13, //MTB mapped to LINK_STATUS pin on module.
+ SW1 = PB_4,
+ GPIO1 = PC_8,
+ GPIO3 = PB_1,
+ AIN0 = PB_0,
+ AIN1 = PC_0,
+ AIN2 = PC_1,
+
+ //Standardized button names
+ BUTTON1 = SW1,
+
+ RADIO_TX = PC_7,
+ RADIO_RX = PC_6,
+ RADIO_RTS = PB_10,
+ RADIO_CTS = PB_12,
+ RADIO_DCD = NC,
+ RADIO_DSR = NC,
+ RADIO_DTR = NC,
+ RADIO_RI = NC,
+ MDMPWRON = PC_13, // 3G_ONOFF DragonFly Design Guide, Page No. 16
+ MDMTXD = RADIO_TX, // Transmit Data
+ MDMRXD = RADIO_RX, // Receive Data
+ MDMRTS = RADIO_RTS, // Request to Send
+ MDMCTS = RADIO_CTS, // Clear to Send
+ MDMDCD = RADIO_DCD, // Data Carrier Detect
+ MDMDSR = RADIO_DSR, // Data Set Ready
+ MDMDTR = RADIO_DTR, // Data Terminal Ready
+ MDMRI = RADIO_RI, // Ring Indicator
+
+} PinName;
+
+#define ACTIVE_HIGH_POLARITY 1
+#define ACTIVE_LOW_POLARITY 0
+
+#define MDM_PIN_POLARITY ACTIVE_HIGH_POLARITY
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_MICRO/startup_stm32f411xe.S b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_MICRO/startup_stm32f411xe.S
new file mode 100644
index 0000000000..aa7d51ad14
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_MICRO/startup_stm32f411xe.S
@@ -0,0 +1,373 @@
+;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name : startup_stm32f411xe.s
+;* Author : MCD Application Team
+;* Version : V2.1.0
+;* Date : 19-June-2014
+;* Description : STM32F411xExx devices vector table for MDK-ARM_MICRO toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+ EXPORT __initial_sp
+
+Stack_Mem SPACE Stack_Size
+__initial_sp EQU 0x20020000 ; Top of RAM
+
+
+; Heap Configuration
+; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Heap_Size EQU 0x00000400
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit EQU (__initial_sp - Stack_Size)
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD 0 ; Reserved
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD FPU_IRQHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream0_IRQHandler [WEAK]
+ EXPORT DMA1_Stream1_IRQHandler [WEAK]
+ EXPORT DMA1_Stream2_IRQHandler [WEAK]
+ EXPORT DMA1_Stream3_IRQHandler [WEAK]
+ EXPORT DMA1_Stream4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream5_IRQHandler [WEAK]
+ EXPORT DMA1_Stream6_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT DMA1_Stream7_IRQHandler [WEAK]
+ EXPORT SDIO_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream0_IRQHandler [WEAK]
+ EXPORT DMA2_Stream1_IRQHandler [WEAK]
+ EXPORT DMA2_Stream2_IRQHandler [WEAK]
+ EXPORT DMA2_Stream3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream4_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+ EXPORT DMA2_Stream5_IRQHandler [WEAK]
+ EXPORT DMA2_Stream6_IRQHandler [WEAK]
+ EXPORT DMA2_Stream7_IRQHandler [WEAK]
+ EXPORT USART6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT SPI4_IRQHandler [WEAK]
+ EXPORT SPI5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Stream0_IRQHandler
+DMA1_Stream1_IRQHandler
+DMA1_Stream2_IRQHandler
+DMA1_Stream3_IRQHandler
+DMA1_Stream4_IRQHandler
+DMA1_Stream5_IRQHandler
+DMA1_Stream6_IRQHandler
+ADC_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+DMA1_Stream7_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+DMA2_Stream0_IRQHandler
+DMA2_Stream1_IRQHandler
+DMA2_Stream2_IRQHandler
+DMA2_Stream3_IRQHandler
+DMA2_Stream4_IRQHandler
+OTG_FS_IRQHandler
+DMA2_Stream5_IRQHandler
+DMA2_Stream6_IRQHandler
+DMA2_Stream7_IRQHandler
+USART6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+FPU_IRQHandler
+SPI4_IRQHandler
+SPI5_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_MICRO/stm32f411re.sct b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_MICRO/stm32f411re.sct
new file mode 100644
index 0000000000..491087ba47
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_MICRO/stm32f411re.sct
@@ -0,0 +1,47 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+; FIRST 64 KB FLASH FOR BOOTLOADER
+; REST 448 KB FLASH FOR APPLICATION
+LR_IROM1 0x08010000 0x70000 { ; load region size_region
+
+ ER_IROM1 0x08010000 0x70000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_STD/startup_stm32f411xe.S b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_STD/startup_stm32f411xe.S
new file mode 100644
index 0000000000..effaaf1e52
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_STD/startup_stm32f411xe.S
@@ -0,0 +1,346 @@
+;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name : startup_stm32f411xe.s
+;* Author : MCD Application Team
+;* Version : V2.1.0
+;* Date : 19-June-2014
+;* Description : STM32F411xExx devices vector table for MDK-ARM_STD toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+__initial_sp EQU 0x20020000 ; Top of RAM
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD 0 ; Reserved
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD FPU_IRQHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream0_IRQHandler [WEAK]
+ EXPORT DMA1_Stream1_IRQHandler [WEAK]
+ EXPORT DMA1_Stream2_IRQHandler [WEAK]
+ EXPORT DMA1_Stream3_IRQHandler [WEAK]
+ EXPORT DMA1_Stream4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream5_IRQHandler [WEAK]
+ EXPORT DMA1_Stream6_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT DMA1_Stream7_IRQHandler [WEAK]
+ EXPORT SDIO_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream0_IRQHandler [WEAK]
+ EXPORT DMA2_Stream1_IRQHandler [WEAK]
+ EXPORT DMA2_Stream2_IRQHandler [WEAK]
+ EXPORT DMA2_Stream3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream4_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+ EXPORT DMA2_Stream5_IRQHandler [WEAK]
+ EXPORT DMA2_Stream6_IRQHandler [WEAK]
+ EXPORT DMA2_Stream7_IRQHandler [WEAK]
+ EXPORT USART6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT SPI4_IRQHandler [WEAK]
+ EXPORT SPI5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Stream0_IRQHandler
+DMA1_Stream1_IRQHandler
+DMA1_Stream2_IRQHandler
+DMA1_Stream3_IRQHandler
+DMA1_Stream4_IRQHandler
+DMA1_Stream5_IRQHandler
+DMA1_Stream6_IRQHandler
+ADC_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+DMA1_Stream7_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+DMA2_Stream0_IRQHandler
+DMA2_Stream1_IRQHandler
+DMA2_Stream2_IRQHandler
+DMA2_Stream3_IRQHandler
+DMA2_Stream4_IRQHandler
+OTG_FS_IRQHandler
+DMA2_Stream5_IRQHandler
+DMA2_Stream6_IRQHandler
+DMA2_Stream7_IRQHandler
+USART6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+FPU_IRQHandler
+SPI4_IRQHandler
+SPI5_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_STD/stm32f411re.sct b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_STD/stm32f411re.sct
new file mode 100644
index 0000000000..491087ba47
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_ARM_STD/stm32f411re.sct
@@ -0,0 +1,47 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+; FIRST 64 KB FLASH FOR BOOTLOADER
+; REST 448 KB FLASH FOR APPLICATION
+LR_IROM1 0x08010000 0x70000 { ; load region size_region
+
+ ER_IROM1 0x08010000 0x70000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_GCC_ARM/NUCLEO_F411RE.ld b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_GCC_ARM/NUCLEO_F411RE.ld
new file mode 100644
index 0000000000..a832fffb7e
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_GCC_ARM/NUCLEO_F411RE.ld
@@ -0,0 +1,153 @@
+/* Linker script for STM32F411 */
+
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ /* First 64kB of flash reserved for bootloader */
+ /* Other 448kB for application */
+ FLASH (rx) : ORIGIN = 0x08010000, LENGTH = 448K
+/* CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K */
+ RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_GCC_ARM/startup_STM32F41x.S b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_GCC_ARM/startup_STM32F41x.S
new file mode 100644
index 0000000000..b7f10ce5fc
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_GCC_ARM/startup_STM32F41x.S
@@ -0,0 +1,297 @@
+/* File: startup_STM32F40x.S
+ * Purpose: startup file for Cortex-M4 devices. Should use with
+ * GCC for ARM Embedded Processors
+ * Version: V1.4
+ * Date: 09 July 2012
+ *
+ * Copyright (c) 2011, 2012, ARM Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of the ARM Limited nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+ .syntax unified
+ .arch armv7-m
+
+ .section .stack
+ .align 3
+#ifdef __STACK_SIZE
+ .equ Stack_Size, __STACK_SIZE
+#else
+ .equ Stack_Size, 0xc00
+#endif
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0x400
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector
+ .align 2
+ .globl __isr_vector
+__isr_vector:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler /* Reset Handler */
+ .long NMI_Handler /* NMI Handler */
+ .long HardFault_Handler /* Hard Fault Handler */
+ .long MemManage_Handler /* MPU Fault Handler */
+ .long BusFault_Handler /* Bus Fault Handler */
+ .long UsageFault_Handler /* Usage Fault Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long SVC_Handler /* SVCall Handler */
+ .long DebugMon_Handler /* Debug Monitor Handler */
+ .long 0 /* Reserved */
+ .long PendSV_Handler /* PendSV Handler */
+ .long SysTick_Handler /* SysTick Handler */
+
+ /* External interrupts */
+ .long WWDG_IRQHandler /* Window WatchDog */
+ .long PVD_IRQHandler /* PVD through EXTI Line detection */
+ .long TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .long RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .long FLASH_IRQHandler /* FLASH */
+ .long RCC_IRQHandler /* RCC */
+ .long EXTI0_IRQHandler /* EXTI Line0 */
+ .long EXTI1_IRQHandler /* EXTI Line1 */
+ .long EXTI2_IRQHandler /* EXTI Line2 */
+ .long EXTI3_IRQHandler /* EXTI Line3 */
+ .long EXTI4_IRQHandler /* EXTI Line4 */
+ .long DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .long DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .long DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .long DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .long DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .long DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .long DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .long ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .long TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .long TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .long TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .long TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .long TIM2_IRQHandler /* TIM2 */
+ .long TIM3_IRQHandler /* TIM3 */
+ .long TIM4_IRQHandler /* TIM4 */
+ .long I2C1_EV_IRQHandler /* I2C1 Event */
+ .long I2C1_ER_IRQHandler /* I2C1 Error */
+ .long I2C2_EV_IRQHandler /* I2C2 Event */
+ .long I2C2_ER_IRQHandler /* I2C2 Error */
+ .long SPI1_IRQHandler /* SPI1 */
+ .long SPI2_IRQHandler /* SPI2 */
+ .long USART1_IRQHandler /* USART1 */
+ .long USART2_IRQHandler /* USART2 */
+ .long 0 /* Reserved */
+ .long EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .long RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .long OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .long 0 /* Reserved */
+ .long SDIO_IRQHandler /* SDIO */
+ .long TIM5_IRQHandler /* TIM5 */
+ .long SPI3_IRQHandler /* SPI3 */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .long DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .long DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .long DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .long DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long OTG_FS_IRQHandler /* USB OTG FS */
+ .long DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .long DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .long DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .long USART6_IRQHandler /* USART6 */
+ .long I2C3_EV_IRQHandler /* I2C3 event */
+ .long I2C3_ER_IRQHandler /* I2C3 error */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long FPU_IRQHandler /* FPU */
+ .long SPI4_IRQHandler /* SPI4 */
+ .long SPI5_IRQHandler /* SPI5 */
+
+ .size __isr_vector, . - __isr_vector
+
+ .text
+ .thumb
+ .thumb_func
+ .align 2
+ .globl Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+
+ ldr r1, =__etext
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+.LC0:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .LC0
+
+ ldr r0, =SystemInit
+ blx r0
+ ldr r0, =_start
+ bx r0
+ .pool
+ .size Reset_Handler, . - Reset_Handler
+
+ .text
+/* Macro to define default handlers. Default handler
+ * will be weak symbol and just dead loops. They can be
+ * overwritten by other handlers */
+ .macro def_default_handler handler_name
+ .align 1
+ .thumb_func
+ .weak \handler_name
+ .type \handler_name, %function
+\handler_name :
+ b .
+ .size \handler_name, . - \handler_name
+ .endm
+
+ def_default_handler NMI_Handler
+ def_default_handler HardFault_Handler
+ def_default_handler MemManage_Handler
+ def_default_handler BusFault_Handler
+ def_default_handler UsageFault_Handler
+ def_default_handler SVC_Handler
+ def_default_handler DebugMon_Handler
+ def_default_handler PendSV_Handler
+ def_default_handler SysTick_Handler
+ def_default_handler Default_Handler
+
+ .macro def_irq_default_handler handler_name
+ .weak \handler_name
+ .set \handler_name, Default_Handler
+ .endm
+
+ def_irq_default_handler WWDG_IRQHandler
+ def_irq_default_handler PVD_IRQHandler
+ def_irq_default_handler TAMP_STAMP_IRQHandler
+ def_irq_default_handler RTC_WKUP_IRQHandler
+ def_irq_default_handler FLASH_IRQHandler
+ def_irq_default_handler RCC_IRQHandler
+ def_irq_default_handler EXTI0_IRQHandler
+ def_irq_default_handler EXTI1_IRQHandler
+ def_irq_default_handler EXTI2_IRQHandler
+ def_irq_default_handler EXTI3_IRQHandler
+ def_irq_default_handler EXTI4_IRQHandler
+ def_irq_default_handler DMA1_Stream0_IRQHandler
+ def_irq_default_handler DMA1_Stream1_IRQHandler
+ def_irq_default_handler DMA1_Stream2_IRQHandler
+ def_irq_default_handler DMA1_Stream3_IRQHandler
+ def_irq_default_handler DMA1_Stream4_IRQHandler
+ def_irq_default_handler DMA1_Stream5_IRQHandler
+ def_irq_default_handler DMA1_Stream6_IRQHandler
+ def_irq_default_handler ADC_IRQHandler
+ def_irq_default_handler EXTI9_5_IRQHandler
+ def_irq_default_handler TIM1_BRK_TIM9_IRQHandler
+ def_irq_default_handler TIM1_UP_TIM10_IRQHandler
+ def_irq_default_handler TIM1_TRG_COM_TIM11_IRQHandler
+ def_irq_default_handler TIM1_CC_IRQHandler
+ def_irq_default_handler TIM2_IRQHandler
+ def_irq_default_handler TIM3_IRQHandler
+ def_irq_default_handler TIM4_IRQHandler
+ def_irq_default_handler I2C1_EV_IRQHandler
+ def_irq_default_handler I2C1_ER_IRQHandler
+ def_irq_default_handler I2C2_EV_IRQHandler
+ def_irq_default_handler I2C2_ER_IRQHandler
+ def_irq_default_handler SPI1_IRQHandler
+ def_irq_default_handler SPI2_IRQHandler
+ def_irq_default_handler USART1_IRQHandler
+ def_irq_default_handler USART2_IRQHandler
+ def_irq_default_handler EXTI15_10_IRQHandler
+ def_irq_default_handler RTC_Alarm_IRQHandler
+ def_irq_default_handler OTG_FS_WKUP_IRQHandler
+ def_irq_default_handler DMA1_Stream7_IRQHandler
+ def_irq_default_handler SDIO_IRQHandler
+ def_irq_default_handler TIM5_IRQHandler
+ def_irq_default_handler SPI3_IRQHandler
+ def_irq_default_handler DMA2_Stream0_IRQHandler
+ def_irq_default_handler DMA2_Stream1_IRQHandler
+ def_irq_default_handler DMA2_Stream2_IRQHandler
+ def_irq_default_handler DMA2_Stream3_IRQHandler
+ def_irq_default_handler DMA2_Stream4_IRQHandler
+ def_irq_default_handler OTG_FS_IRQHandler
+ def_irq_default_handler DMA2_Stream5_IRQHandler
+ def_irq_default_handler DMA2_Stream6_IRQHandler
+ def_irq_default_handler DMA2_Stream7_IRQHandler
+ def_irq_default_handler USART6_IRQHandler
+ def_irq_default_handler I2C3_EV_IRQHandler
+ def_irq_default_handler I2C3_ER_IRQHandler
+ def_irq_default_handler FPU_IRQHandler
+ def_irq_default_handler SPI4_IRQHandler
+ def_irq_default_handler SPI5_IRQHandler
+ def_irq_default_handler DEF_IRQHandler
+
+ .end
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_IAR/startup_stm32f411xe.S b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_IAR/startup_stm32f411xe.S
new file mode 100644
index 0000000000..1b782c36dc
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_IAR/startup_stm32f411xe.S
@@ -0,0 +1,523 @@
+;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name : startup_stm32f411xe.s
+;* Author : MCD Application Team
+;* Version : V2.1.0
+;* Date : 19-June-2014
+;* Description : STM32F411xExx devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == _iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* - Configure the system clock
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD 0 ; Reserved
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD FPU_IRQHandler ; FPU
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMP_STAMP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TAMP_STAMP_IRQHandler
+ B TAMP_STAMP_IRQHandler
+
+ PUBWEAK RTC_WKUP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_WKUP_IRQHandler
+ B RTC_WKUP_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Stream0_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream0_IRQHandler
+ B DMA1_Stream0_IRQHandler
+
+ PUBWEAK DMA1_Stream1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream1_IRQHandler
+ B DMA1_Stream1_IRQHandler
+
+ PUBWEAK DMA1_Stream2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream2_IRQHandler
+ B DMA1_Stream2_IRQHandler
+
+ PUBWEAK DMA1_Stream3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream3_IRQHandler
+ B DMA1_Stream3_IRQHandler
+
+ PUBWEAK DMA1_Stream4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream4_IRQHandler
+ B DMA1_Stream4_IRQHandler
+
+ PUBWEAK DMA1_Stream5_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream5_IRQHandler
+ B DMA1_Stream5_IRQHandler
+
+ PUBWEAK DMA1_Stream6_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream6_IRQHandler
+ B DMA1_Stream6_IRQHandler
+
+ PUBWEAK ADC_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+ADC_IRQHandler
+ B ADC_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_TIM9_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_TIM9_IRQHandler
+ B TIM1_BRK_TIM9_IRQHandler
+
+ PUBWEAK TIM1_UP_TIM10_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_TIM10_IRQHandler
+ B TIM1_UP_TIM10_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_TIM11_IRQHandler
+ B TIM1_TRG_COM_TIM11_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTC_Alarm_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+ B RTC_Alarm_IRQHandler
+
+ PUBWEAK OTG_FS_WKUP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+OTG_FS_WKUP_IRQHandler
+ B OTG_FS_WKUP_IRQHandler
+
+ PUBWEAK DMA1_Stream7_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Stream7_IRQHandler
+ B DMA1_Stream7_IRQHandler
+
+ PUBWEAK SDIO_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SDIO_IRQHandler
+ B SDIO_IRQHandler
+
+ PUBWEAK TIM5_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+ B TIM5_IRQHandler
+
+ PUBWEAK SPI3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+ B SPI3_IRQHandler
+
+ PUBWEAK DMA2_Stream0_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream0_IRQHandler
+ B DMA2_Stream0_IRQHandler
+
+ PUBWEAK DMA2_Stream1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream1_IRQHandler
+ B DMA2_Stream1_IRQHandler
+
+ PUBWEAK DMA2_Stream2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream2_IRQHandler
+ B DMA2_Stream2_IRQHandler
+
+ PUBWEAK DMA2_Stream3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream3_IRQHandler
+ B DMA2_Stream3_IRQHandler
+
+ PUBWEAK DMA2_Stream4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream4_IRQHandler
+ B DMA2_Stream4_IRQHandler
+
+ PUBWEAK OTG_FS_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+OTG_FS_IRQHandler
+ B OTG_FS_IRQHandler
+
+ PUBWEAK DMA2_Stream5_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream5_IRQHandler
+ B DMA2_Stream5_IRQHandler
+
+ PUBWEAK DMA2_Stream6_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream6_IRQHandler
+ B DMA2_Stream6_IRQHandler
+
+ PUBWEAK DMA2_Stream7_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Stream7_IRQHandler
+ B DMA2_Stream7_IRQHandler
+
+ PUBWEAK USART6_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USART6_IRQHandler
+ B USART6_IRQHandler
+
+ PUBWEAK I2C3_EV_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C3_EV_IRQHandler
+ B I2C3_EV_IRQHandler
+
+ PUBWEAK I2C3_ER_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C3_ER_IRQHandler
+ B I2C3_ER_IRQHandler
+
+ PUBWEAK FPU_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+FPU_IRQHandler
+ B FPU_IRQHandler
+
+ PUBWEAK SPI4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SPI4_IRQHandler
+ B SPI4_IRQHandler
+
+ PUBWEAK SPI5_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SPI5_IRQHandler
+ B SPI5_IRQHandler
+
+ END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_IAR/stm32f411xe.icf b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_IAR/stm32f411xe.icf
new file mode 100644
index 0000000000..87e12d26bb
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/TOOLCHAIN_IAR/stm32f411xe.icf
@@ -0,0 +1,32 @@
+/* [ROM = 512kb = 0x80000] */
+define symbol __intvec_start__ = 0x08010000;
+define symbol __region_ROM_start__ = 0x08010000;
+define symbol __region_ROM_end__ = 0x0807FFFF;
+
+/* [RAM = 128kb = 0x20000] Vector table dynamic copy: 102 vectors = 408 bytes (0x198) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x20000197; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000198;
+define symbol __region_RAM_end__ = 0x2001FFFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+/* Stack: 4kB - 408B for vector table */
+/* Heap: 64kB */
+define symbol __size_cstack__ = 0xe68;
+define symbol __size_heap__ = 0x10000;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/cmsis.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/cmsis.h
new file mode 100644
index 0000000000..f0c2b2a907
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/cmsis.h
@@ -0,0 +1,38 @@
+/* mbed Microcontroller Library
+ * A generic CMSIS include header
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_H
+#define MBED_CMSIS_H
+
+#include "stm32f4xx.h"
+#include "cmsis_nvic.h"
+
+#endif
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/cmsis_nvic.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/cmsis_nvic.h
new file mode 100644
index 0000000000..e44a1ce9f6
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/cmsis_nvic.h
@@ -0,0 +1,41 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F411RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 86 vectors = 344 bytes from 0x40 to 0x197
+// Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+#define NVIC_NUM_VECTORS 102
+#define NVIC_RAM_VECTOR_ADDRESS 0x20000000 // Vectors positioned at start of RAM
+
+#endif
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/hal_tick.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/hal_tick.h
new file mode 100644
index 0000000000..cedecee545
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/hal_tick.h
@@ -0,0 +1,66 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f4xx.h"
+#include "stm32f4xx_ll_tim.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
+#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
+
+#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
+
+#define TIM_MST_16BIT 0 // 1=16-bit timer, 0=32-bit timer
+
+#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/stm32f411xe.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/stm32f411xe.h
new file mode 100644
index 0000000000..c9e8ed9d04
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/stm32f411xe.h
@@ -0,0 +1,8683 @@
+/**
+ ******************************************************************************
+ * @file stm32f411xe.h
+ * @author MCD Application Team
+ * @version V2.6.1
+ * @date 14-February-2017
+ * @brief CMSIS STM32F411xE Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - peripherals registers declarations and bits definition
+ * - Macros to access peripheral's registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f411xe
+ * @{
+ */
+
+#ifndef __STM32F411xE_H
+#define __STM32F411xE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+#ifndef __FPU_PRESENT
+#define __FPU_PRESENT 1U /*!< FPU present */
+#endif /* __FPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI4_IRQn = 84, /*!< SPI4 global Interrupt */
+ SPI5_IRQn = 85 /*!< SPI5 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+ uint32_t RESERVED7[1]; /*!< Reserved, 0x88 */
+ __IO uint32_t DCKCFGR; /*!< RCC Dedicated Clocks configuration register, Address offset: 0x8C */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __IO const uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __IO const uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __IO const uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __IO const uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __IO const uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __IO const uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __IO const uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __IO const uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+/**
+ * @brief USB_OTG_Core_Registers
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */
+ __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */
+ uint32_t Reserved30[2]; /*!< Reserved 030h */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */
+ __IO uint32_t CID; /*!< User ID Register 03Ch */
+ uint32_t Reserved40[48]; /*!< Reserved 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+} USB_OTG_GlobalTypeDef;
+
+/**
+ * @brief USB_OTG_device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register 800h */
+ __IO uint32_t DCTL; /*!< dev Control Register 804h */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */
+ uint32_t Reserved0C; /*!< Reserved 80Ch */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */
+ uint32_t Reserved20; /*!< Reserved 820h */
+ uint32_t Reserved9; /*!< Reserved 824h */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */
+ __IO uint32_t DTHRCTL; /*!< dev threshold 830h */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */
+ uint32_t Reserved40; /*!< dedicated EP mask 840h */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */
+ uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */
+} USB_OTG_DeviceTypeDef;
+
+/**
+ * @brief USB_OTG_IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+} USB_OTG_INEndpointTypeDef;
+
+/**
+ * @brief USB_OTG_OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */
+ __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */
+ __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */
+ uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */
+} USB_OTG_OUTEndpointTypeDef;
+
+/**
+ * @brief USB_OTG_Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /*!< Host Configuration Register 400h */
+ __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */
+ __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */
+ uint32_t Reserved40C; /*!< Reserved 40Ch */
+ __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */
+ __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */
+ __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */
+} USB_OTG_HostTypeDef;
+
+/**
+ * @brief USB_OTG_Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */
+ __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */
+ __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */
+ __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */
+ __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */
+ __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */
+ uint32_t Reserved[2]; /*!< Reserved */
+} USB_OTG_HostChannelTypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+#define FLASH_BASE 0x08000000U /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000U /*!< SRAM1(128 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000U /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000U /*!< Backup SRAM(4 KB) base address in the alias region */
+#define SRAM1_BB_BASE 0x22000000U /*!< SRAM1(128 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000U /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000U /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x0807FFFFU /*!< FLASH end address */
+#define FLASH_OTP_BASE 0x1FFF7800U /*!< Base address of : (up to 528 Bytes) embedded FLASH OTP Area */
+#define FLASH_OTP_END 0x1FFF7A0FU /*!< End address of : (up to 528 Bytes) embedded FLASH OTP Area */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800U)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400U)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000U)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400U)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000U)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000U)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400U)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U)
+#define ADC1_COMMON_BASE (APB2PERIPH_BASE + 0x2300U)
+/* Legacy define */
+#define ADC_BASE ADC1_COMMON_BASE
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00U)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U)
+#define SPI5_BASE (APB2PERIPH_BASE + 0x5000U)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U)
+
+
+/*!< Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000U
+/*!< USB registers base address */
+#define USB_OTG_FS_PERIPH_BASE 0x50000000U
+
+#define USB_OTG_GLOBAL_BASE 0x000U
+#define USB_OTG_DEVICE_BASE 0x800U
+#define USB_OTG_IN_ENDPOINT_BASE 0x900U
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U
+#define USB_OTG_EP_REG_SIZE 0x20U
+#define USB_OTG_HOST_BASE 0x400U
+#define USB_OTG_HOST_PORT_BASE 0x440U
+#define USB_OTG_HOST_CHANNEL_BASE 0x500U
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20U
+#define USB_OTG_PCGCCTL_BASE 0xE00U
+#define USB_OTG_FIFO_BASE 0x1000U
+#define USB_OTG_FIFO_SIZE 0x1000U
+
+#define UID_BASE 0x1FFF7A10U /*!< Unique device ID register base address */
+#define FLASHSIZE_BASE 0x1FFF7A22U /*!< FLASH Size register base address */
+#define PACKAGE_BASE 0x1FFF7BF0U /*!< Package size register base address */
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE)
+/* Legacy define */
+#define ADC ADC1_COMMON
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5 ((SPI_TypeDef *) SPI5_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD_Pos (0U)
+#define ADC_SR_AWD_Msk (0x1U << ADC_SR_AWD_Pos) /*!< 0x00000001 */
+#define ADC_SR_AWD ADC_SR_AWD_Msk /*!© COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F410Tx) && !defined (STM32F410Cx) && \
+ !defined (STM32F410Rx) && !defined (STM32F411xE) && !defined (STM32F446xx) && !defined (STM32F469xx) && \
+ !defined (STM32F479xx) && !defined (STM32F412Cx) && !defined (STM32F412Rx) && !defined (STM32F412Vx) && \
+ !defined (STM32F412Zx) && !defined (STM32F413xx) && !defined (STM32F423xx)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+ /* #define STM32F410Tx */ /*!< STM32F410T8 and STM32F410TB Devices */
+ /* #define STM32F410Cx */ /*!< STM32F410C8 and STM32F410CB Devices */
+ /* #define STM32F410Rx */ /*!< STM32F410R8 and STM32F410RB Devices */
+ #define STM32F411xE /*!< STM32F411CC, STM32F411RC, STM32F411VC, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+ /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
+ and STM32F446ZE Devices */
+ /* #define STM32F469xx */ /*!< STM32F469AI, STM32F469II, STM32F469BI, STM32F469NI, STM32F469AG, STM32F469IG, STM32F469BG,
+ STM32F469NG, STM32F469AE, STM32F469IE, STM32F469BE and STM32F469NE Devices */
+ /* #define STM32F479xx */ /*!< STM32F479AI, STM32F479II, STM32F479BI, STM32F479NI, STM32F479AG, STM32F479IG, STM32F479BG
+ and STM32F479NG Devices */
+ /* #define STM32F412Cx */ /*!< STM32F412CEU and STM32F412CGU Devices */
+ /* #define STM32F412Zx */ /*!< STM32F412ZET, STM32F412ZGT, STM32F412ZEJ and STM32F412ZGJ Devices */
+ /* #define STM32F412Vx */ /*!< STM32F412VET, STM32F412VGT, STM32F412VEH and STM32F412VGH Devices */
+ /* #define STM32F412Rx */ /*!< STM32F412RET, STM32F412RGT, STM32F412REY and STM32F412RGY Devices */
+ /* #define STM32F413xx */ /*!< STM32F413CH, STM32F413MH, STM32F413RH, STM32F413VH, STM32F413ZH, STM32F413CG, STM32F413MG,
+ STM32F413RG, STM32F413VG and STM32F413ZG Devices */
+ /* #define STM32F423xx */ /*!< STM32F423CH, STM32F423RH, STM32F423VH and STM32F423ZH Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ #define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS version number V2.6.1
+ */
+#define __STM32F4xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_VERSION_SUB1 (0x06U) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_VERSION ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F410Tx)
+ #include "stm32f410tx.h"
+#elif defined(STM32F410Cx)
+ #include "stm32f410cx.h"
+#elif defined(STM32F410Rx)
+ #include "stm32f410rx.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+ #include "stm32f446xx.h"
+#elif defined(STM32F469xx)
+ #include "stm32f469xx.h"
+#elif defined(STM32F479xx)
+ #include "stm32f479xx.h"
+#elif defined(STM32F412Cx)
+ #include "stm32f412cx.h"
+#elif defined(STM32F412Zx)
+ #include "stm32f412zx.h"
+#elif defined(STM32F412Rx)
+ #include "stm32f412rx.h"
+#elif defined(STM32F412Vx)
+ #include "stm32f412vx.h"
+#elif defined(STM32F413xx)
+ #include "stm32f413xx.h"
+#elif defined(STM32F423xx)
+ #include "stm32f423xx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0U,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0U,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0U,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/system_clock.c b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/system_clock.c
new file mode 100644
index 0000000000..eee454211d
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/system_clock.c
@@ -0,0 +1,246 @@
+/* mbed Microcontroller Library
+* Copyright (c) 2006-2017 ARM Limited
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+
+/**
+ * This file configures the system clock as follows:
+ *-----------------------------------------------------------------------------
+ * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
+ * | (external 8 MHz clock) | (internal 16 MHz)
+ * | 2- PLL_HSE_XTAL |
+ * | (external 8 MHz xtal) |
+ *-----------------------------------------------------------------------------
+ * SYSCLK(MHz) | 100 | 100
+ *-----------------------------------------------------------------------------
+ * AHBCLK (MHz) | 100 | 100
+ *-----------------------------------------------------------------------------
+ * APB1CLK (MHz) | 50 | 50
+ *-----------------------------------------------------------------------------
+ * APB2CLK (MHz) | 100 | 100
+ *-----------------------------------------------------------------------------
+ * USB capable (48 MHz precise clock) | NO | NO
+ *-----------------------------------------------------------------------------
+**/
+
+#include "stm32f4xx.h"
+#include "mbed_debug.h"
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#ifndef VECT_TAB_OFFSET
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+#endif
+
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (0) /* Use external clock */
+#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and External memory
+ * configuration.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+#endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+}
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+#if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+#endif
+ {
+ /* 3- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0) {
+ while(1) {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+
+ /* Output clock on MCO2 pin(PC9) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 100 MHz / 4 = 25 MHz
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSE oscillator and activate PLL with HSE as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ if (bypass == 0) {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
+ } else {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
+ }
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ //RCC_OscInitStruct.PLL.PLLM = 8; // VCO input clock = 1 MHz (8 MHz / 8)
+ //RCC_OscInitStruct.PLL.PLLN = 400; // VCO output clock = 400 MHz (1 MHz * 400)
+ RCC_OscInitStruct.PLL.PLLM = 13; // VCO input clock = 2 MHz (8 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLN = 192; // VCO output clock = 400 MHz (2 MHz * 200)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 100 MHz (400 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 8; // USB clock = 44.44 MHz (400 MHz / 9) --> Not good for USB
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 100 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 100 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 50 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 100 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+
+ //if (bypass == 0)
+ // HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz with xtal
+ //else
+ // HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz with external clock
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSI oscillator and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSICalibrationValue = 16;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ //RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
+ //RCC_OscInitStruct.PLL.PLLN = 400; // VCO output clock = 400 MHz (1 MHz * 400)
+ RCC_OscInitStruct.PLL.PLLM = 8; // VCO input clock = 2 MHz (16 MHz / 8)
+ RCC_OscInitStruct.PLL.PLLN = 200; // VCO output clock = 400 MHz (2 MHz * 200)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 100 MHz (400 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 9; // USB clock = 44.44 MHz (400 MHz / 9) --> Not good for USB
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 100 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 100 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 50 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 100 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+
+/******************************************************************************/
+/* Hard Fault Handler */
+/******************************************************************************/
+void HardFault_Handler(void)
+{
+ debug("Hard Fault\n");
+ NVIC_SystemReset();
+}
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/system_stm32f4xx.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/system_stm32f4xx.h
new file mode 100644
index 0000000000..113f67cfe6
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/device/system_stm32f4xx.h
@@ -0,0 +1,125 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.6.1
+ * @date 14-February-2017
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/objects.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/objects.h
new file mode 100644
index 0000000000..16467b7c87
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/objects.h
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+#include "common_objects.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/onboard_modem_api.c b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/onboard_modem_api.c
new file mode 100644
index 0000000000..ea532df442
--- /dev/null
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/onboard_modem_api.c
@@ -0,0 +1,65 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if MBED_CONF_NSAPI_PRESENT
+
+#include "cellular/onboard_modem_api.h"
+#include "gpio_api.h"
+#include "platform/mbed_wait_api.h"
+#include "PinNames.h"
+
+#if MODEM_ON_BOARD
+
+static void press_power_button(int time_ms)
+{
+ gpio_t gpio;
+
+ gpio_init_out_ex(&gpio, MDMPWRON, 1);
+ gpio_write(&gpio, 0);
+ wait_ms(time_ms);
+ gpio_write(&gpio, 1);
+}
+
+void onboard_modem_init()
+{
+ //does nothing at the moment, TODO: MultiTech to add hardware initialization stuff if needed
+}
+
+void onboard_modem_deinit()
+{
+ //does nothing at the moment, TODO: MultiTech to add hardware de-initialization stuff if needed
+}
+void onboard_modem_power_up()
+{
+ /* keep the power line low for 200 milisecond */
+ press_power_button(200);
+ /* give modem a little time to respond */
+ wait_ms(100);
+}
+
+void onboard_modem_power_down()
+{
+ gpio_t gpio;
+
+ gpio_init_out_ex(&gpio, MDMPWRON, 0);
+ /* keep the power line low for more than 10 seconds.
+ * If 3G_ON_OFF pin is kept low for more than a second, a controlled disconnect and shutdown takes
+ * place, Due to the network disconnect, shut-off can take up to 30 seconds. However, we wait for 10
+ * seconds only */
+ wait_ms(10*1000);
+}
+#endif //MODEM_ON_BOARD
+#endif //MBED_CONF_NSAPI_PRESENT
diff --git a/targets/targets.json b/targets/targets.json
index 6c236cae4d..05d5a55559 100644
--- a/targets/targets.json
+++ b/targets/targets.json
@@ -1844,6 +1844,47 @@
"release_versions": ["2", "5"],
"device_name": "STM32F411RE"
},
+ "MTB_MTS_DRAGONFLY": {
+ "inherits": ["FAMILY_STM32"],
+ "core": "Cortex-M4F",
+ "extra_labels_add": ["STM32F4", "STM32F411RE"],
+ "config": {
+ "modem_is_on_board": {
+ "help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
+ "value": 1,
+ "macro_name": "MODEM_ON_BOARD"
+ },
+ "modem_data_connection_type": {
+ "help": "Value: Defines how an on-board modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
+ "value": 1,
+ "macro_name": "MODEM_ON_BOARD_UART"
+ },
+ "usb_tx": {
+ "help": "Value PB_6",
+ "value": "PB_6"
+ },
+ "usb_rx": {
+ "help": "Value PB_7",
+ "value": "PB_7"
+ },
+ "stdio_uart": {
+ "help": "Value: UART_1",
+ "value": "UART_1",
+ "macro_name": "STDIO_UART"
+ }
+ },
+ "overrides": {
+ "lse_available": 0
+ },
+ "macros_add": ["HSE_VALUE=26000000", "VECT_TAB_OFFSET=0x08010000"],
+ "post_binary_hook": {
+ "function": "MTSCode.combine_bins_mtb_mts_dragonfly",
+ "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO", "IAR"]
+ },
+ "release_versions": ["2", "5"],
+ "device_name": "STM32F411RE",
+ "bootloader_supported": true
+ },
"XDOT_L151CC": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
diff --git a/tools/bootloaders/MTB_MTS_DRAGONFLY/bootloader.bin b/tools/bootloaders/MTB_MTS_DRAGONFLY/bootloader.bin
new file mode 100644
index 0000000000..e5c640df1c
Binary files /dev/null and b/tools/bootloaders/MTB_MTS_DRAGONFLY/bootloader.bin differ
diff --git a/tools/targets/__init__.py b/tools/targets/__init__.py
index fc4b221a28..020fe5ca19 100644
--- a/tools/targets/__init__.py
+++ b/tools/targets/__init__.py
@@ -458,6 +458,11 @@ class MTSCode(object):
"""A hoof for the MTS Dragonfly"""
MTSCode._combine_bins_helper("MTS_DRAGONFLY_F411RE", binf)
+ @staticmethod
+ def combine_bins_mtb_mts_dragonfly(t_self, resources, elf, binf):
+ """A hook for the MTB MTS Dragonfly"""
+ MTSCode._combine_bins_helper("MTB_MTS_DRAGONFLY", binf)
+
class MCU_NRF51Code(object):
"""NRF51 Hooks"""
@staticmethod