ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge pull request #1490 from ytsuboi/add-TY51822r3 

[TY51822r3] add platform
pull/1503/head
Martin Kojtal 2016-01-15 07:47:49 +00:00
parent 6010f32619 9b7d776d40
commit 45dbe35006
6 changed files with 281 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/system_nrf51.c
View File

@ -61,6 +61,27 @@ void SystemCoreClockUpdate(void)
void SystemInit(void)
{
#if defined(TARGET_NRF_32MHZ_XTAL)
/* For 32MHz HFCLK XTAL such as Taiyo Yuden
Physically, tiny footprint XTAL oscillate higher freq. To make BLE modules smaller, some modules
are using 32MHz XTAL.
This code wriging the value 0xFFFFFF00 to the UICR (User Information Configuration Register)
at address 0x10001008, to make nRF51 works with 32MHz system clock. This register will be overwritten
by SoftDevice to 0xFFFFFFFF, the default value. Each hex files built with mbed classic online compiler
contain SoftDevice, so that, this code run once just after the hex file will be flashed onto nRF51.
After changing the value, nRF51 need to reboot. */
if (*(uint32_t *)0x10001008 == 0xFFFFFFFF)
{
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
*(uint32_t *)0x10001008 = 0xFFFFFF00;
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
NVIC_SystemReset();
while (true){}
}
#endif
/* If desired, switch off the unused RAM to lower consumption by the use of RAMON register.
It can also be done in the application main() function. */

178
libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_TY51822R3/PinNames.h Normal file
View File

@ -0,0 +1,178 @@
/* mbed Microcontroller Library
* Copyright (c) 2015 Nordic Semiconductor
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
#define PORT_SHIFT 3
typedef enum {
p0 = 0,
p1 = 1,
p2 = 2,
p3 = 3,
p4 = 4,
p5 = 5,
p6 = 6,
p7 = 7,
p8 = 8,
p9 = 9,
p10 = 10,
p11 = 11,
p12 = 12,
p13 = 13,
p14 = 14,
p15 = 15,
p16 = 16,
p17 = 17,
p18 = 18,
p19 = 19,
p20 = 20,
p21 = 21,
p22 = 22,
p23 = 23,
p24 = 24,
p25 = 25,
p26 = 26,
p27 = 27,
p28 = 28,
p29 = 29,
p30 = 30,
P0_0 = p0,
P0_1 = p1,
P0_2 = p2,
P0_3 = p3,
P0_4 = p4,
P0_5 = p5,
P0_6 = p6,
P0_7 = p7,
P0_8 = p8,
P0_9 = p9,
P0_10 = p10,
P0_11 = p11,
P0_12 = p12,
P0_13 = p13,
P0_14 = p14,
P0_15 = p15,
P0_16 = p16,
P0_17 = p17,
P0_18 = p18,
P0_19 = p19,
P0_20 = p20,
P0_21 = p21,
P0_22 = p22,
P0_23 = p23,
P0_24 = p24,
P0_25 = p25,
P0_26 = p26,
P0_27 = p27,
P0_28 = p28,
P0_29 = p29,
P0_30 = p30,
LED1 = p21,
LED2 = p22,
LED3 = p23,
LED4 = p24,
BUTTON1 = p17,
BUTTON2 = p18,
BUTTON3 = p19,
BUTTON4 = p20,
RX_PIN_NUMBER = p11,
TX_PIN_NUMBER = p9,
CTS_PIN_NUMBER = p10,
RTS_PIN_NUMBER = p8,
// mBed interface Pins
USBTX = TX_PIN_NUMBER,
USBRX = RX_PIN_NUMBER,
SPI_PSELMOSI0 = p25,
SPI_PSELMISO0 = p28,
SPI_PSELSS0 = p24,
SPI_PSELSCK0 = p29,
SPI_PSELMOSI1 = p13,
SPI_PSELMISO1 = p14,
SPI_PSELSS1 = p12,
SPI_PSELSCK1 = p15,
SPIS_PSELMOSI = p13,
SPIS_PSELMISO = p14,
SPIS_PSELSS = p12,
SPIS_PSELSCK = p15,
I2C_SDA0 = p30,
I2C_SCL0 = p7,
D0 = p12,
D1 = p13,
D2 = p14,
D3 = p15,
D4 = p16,
D5 = p17,
D6 = p18,
D7 = p19,
D8 = p20,
D9 = p23,
D10 = p24,
D11 = p25,
D12 = p28,
D13 = p29,
D14 = p30,
D15 = p7,
A0 = p1,
A1 = p2,
A2 = p3,
A3 = p4,
A4 = p5,
A5 = p6,
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullDown = 1,
PullUp = 3,
PullDefault = PullUp
} PinMode;
#ifdef __cplusplus
}
#endif
#endif

57
libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_TY51822R3/device.h Normal file
View File

@ -0,0 +1,57 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2015 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_DEVICE_H
#define MBED_DEVICE_H
#define DEVICE_PORTIN 1
#define DEVICE_PORTOUT 1
#define DEVICE_PORTINOUT 1
#define DEVICE_INTERRUPTIN 1
#define DEVICE_ANALOGIN 1
#define DEVICE_ANALOGOUT 0
#define DEVICE_SERIAL 1
#define DEVICE_I2C 1
#define DEVICE_I2CSLAVE 0
#define DEVICE_SPI 1
#define DEVICE_SPISLAVE 1
#define DEVICE_CAN 0
#define DEVICE_RTC 0
#define DEVICE_ETHERNET 0
#define DEVICE_PWMOUT 1
#define DEVICE_SEMIHOST 0
#define DEVICE_LOCALFILESYSTEM 0
#define DEVICE_SLEEP 1
#define DEVICE_DEBUG_AWARENESS 0
#define DEVICE_STDIO_MESSAGES 0
#define DEVICE_ERROR_PATTERN 1
#include "objects.h"
#endif

1
workspace_tools/build_release.py
View File

@ -107,6 +107,7 @@ OFFICIAL_MBED_LIBRARY_BUILD = (
('DELTA_DFCM_NNN40', ('ARM', 'GCC_ARM')),
('NRF51_MICROBIT', ('ARM',)),
('NRF51_MICROBIT_B', ('ARM',)),
('TY51822R3', ('ARM', 'GCC_ARM')),
('LPC11U68', ('ARM', 'uARM','GCC_ARM','GCC_CR', 'IAR')),
('OC_MBUINO', ('ARM', 'uARM', 'GCC_ARM', 'IAR')),

23
workspace_tools/targets.py
View File

@ -1528,6 +1528,26 @@ class NRF51_MICROBIT_B_OTA(MCU_NRF51_16K_OTA):
self.extra_labels += ['NRF51_MICROBIT']
self.macros += ['TARGET_NRF51_MICROBIT', 'TARGET_NRF_LFCLK_RC']
class TY51822R3(MCU_NRF51_32K):
def __init__(self):
MCU_NRF51_32K.__init__(self)
self.macros += ['TARGET_NRF_32MHZ_XTAL']
self.supported_toolchains = ["ARM", "GCC_ARM"]
class TY51822R3_BOOT(MCU_NRF51_32K_BOOT):
def __init__(self):
MCU_NRF51_32K_BOOT.__init__(self)
self.extra_labels += ['TY51822R3']
self.macros += ['TARGET_TY51822R3', 'TARGET_NRF_32MHZ_XTAL']
self.supported_toolchains = ["ARM", "GCC_ARM"]
class TY51822R3_OTA(MCU_NRF51_32K_OTA):
def __init__(self):
MCU_NRF51_32K_OTA.__init__(self)
self.extra_labels += ['NRF51_DK']
self.macros += ['TARGET_TY51822R3', 'TARGET_NRF_32MHZ_XTAL']
self.supported_toolchains = ["ARM", "GCC_ARM"]
### ARM ###
@ -1903,6 +1923,9 @@ TARGETS = [
NRF51_MICROBIT_B(), # nRF51_16K - default
NRF51_MICROBIT_B_BOOT(),# nRF51_16K - default
NRF51_MICROBIT_B_OTA(), # nRF51_16K - default
TY51822R3(), # nRF51_32K
TY51822R3_BOOT(), # nRF51_32K
TY51822R3_OTA(), # nRF51_32K
### ARM ###

1
workspace_tools/tests.py
View File

@ -463,6 +463,7 @@ TESTS = [
"NRF51_MICROBIT", "NRF51_MICROBIT_B", "NRF51_MICROBIT_BOOT",
"NRF51_MICROBIT_B_BOOT", "NRF51_MICROBIT_B_OTA", "NRF51_MICROBIT_OTA",
"HRM1017", "HRM1017_BOOT", "HRM1701_OTA",
"TY51822R3", "TY51822R3_BOOT", "TY51822R3_OTA",
"NRF15_DONGLE", "NRF15_DONGLE_BOOT", "NRF15_DONGLE_OTA",
"ARCH_BLE", "ARCH_BLE_BOOT", "ARCH_BLE_OTA",
"ARCH_LINK", "ARCH_LINK_BOOT", "ARCH_LINK_OTA",