[DISCO_F407VG] test MBED_A7 InterruptIn failed

- solution similar to [NUCLEO_F4x1RE]
- digital_loop tests "DigitalIn DigitalOut", "DigitalInOut" and
"InterruptIn" are OK

libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/gpio_irq_api.c

@@ -254,7 +254,8 @@ void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
         else {
         	  mode = STM_MODE_IT_EVT_RESET;
             obj->event = EDGE_NONE;
-        }    }
+        }
+    }
 
     pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
 }

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F407VG/TARGET_DISCO_F407VG/PinNames.h

@@ -53,6 +53,7 @@ extern "C" {
 #define STM_MODE_EVT_RISING         (9)
 #define STM_MODE_EVT_FALLING        (10)
 #define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET       (12)
 
 // High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
 // Low nibble  = pin number

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F407VG/gpio_irq_api.c

@@ -223,8 +223,29 @@ void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) {
     } else {
         mode = STM_MODE_INPUT;
         pull = GPIO_NOPULL;
+        if (event == IRQ_RISE) {
+            if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+                mode = STM_MODE_IT_FALLING;
+                obj->event = EDGE_FALL;
+            } else if (obj->event == EDGE_RISE) {
+                mode = STM_MODE_IT_EVT_RESET;
                 obj->event = EDGE_NONE;
             }
+        }
+        else if (event == IRQ_FALL) {
+            if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+                mode = STM_MODE_IT_RISING;
+                obj->event = EDGE_RISE;
+            } else if (obj->event == IRQ_FALL) {
+                mode = STM_MODE_IT_EVT_RESET;
+                obj->event = EDGE_NONE;
+            }
+        }
+        else {
+        	  mode = STM_MODE_IT_EVT_RESET;
+            obj->event = EDGE_NONE;
+        }
+    }
     
     pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
 }

libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F407VG/pinmap.c

@@ -33,7 +33,7 @@
 #include "mbed_error.h"
 
 // GPIO mode look-up table
-static const uint32_t gpio_mode[12] = {
+static const uint32_t gpio_mode[13] = {
     0x00000000, //  0 = GPIO_MODE_INPUT
     0x00000001, //  1 = GPIO_MODE_OUTPUT_PP
     0x00000011, //  2 = GPIO_MODE_OUTPUT_OD
@@ -45,7 +45,8 @@ static const uint32_t gpio_mode[12] = {
     0x10310000, //  8 = GPIO_MODE_IT_RISING_FALLING
     0x10120000, //  9 = GPIO_MODE_EVT_RISING
     0x10220000, // 10 = GPIO_MODE_EVT_FALLING
-    0x10320000  // 11 = GPIO_MODE_EVT_RISING_FALLING
+    0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
+    0x10000000  // 12 = Reset GPIO_MODE_IT_EVT
 };
 
 // Enable GPIO clock and return GPIO base address

libraries/tests/mbed/digitalin_digitalout/main.cpp

@@ -14,6 +14,10 @@ DigitalIn  in(D2);
 DigitalOut out(PC_6);
 DigitalIn   in(PB_8);
 
+#elif defined(TARGET_DISCO_F407VG)
+DigitalOut out(PC_12);
+DigitalIn  in(PD_0);
+
 #elif defined(TARGET_FF_ARDUINO)
 DigitalOut out(D7);
 DigitalIn  in(D0);

libraries/tests/mbed/digitalinout/main.cpp

@@ -10,10 +10,14 @@ DigitalInOut d2(dp2);
 DigitalInOut d1(D2);
 DigitalInOut d2(D7);
 
-#elif defined(TARGET_NUCLEO_F103RB)
+#elif defined(TARGET_NUCLEO_F103RB) || defined(TARGET_NUCLEO_F401RE) || defined(TARGET_NUCLEO_F411RE)
 DigitalInOut d1(PC_6);
 DigitalInOut d2(PB_8);
 
+#elif defined(TARGET_DISCO_F407VG)
+DigitalInOut d1(PC_12);
+DigitalInOut d2(PD_0);
+
 #elif defined(TARGET_FF_ARDUINO)
 DigitalInOut d1(D0);
 DigitalInOut d2(D7);

libraries/tests/mbed/interruptin/main.cpp

@@ -47,6 +47,10 @@ void in_handler() {
 #define PIN_IN      PB_8
 #define PIN_OUT     PC_6
 
+#elif defined(TARGET_DISCO_F407VG)
+#define PIN_OUT    PC_12
+#define PIN_IN     PD_0
+
 #elif defined(TARGET_FF_ARDUINO)
 #define PIN_OUT    D0
 #define PIN_IN     D7