ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

STM32: Move types definitions to a common file 

Only one point of attention:
STM_MODE_ANALOG_ADC_CONTROL is a specific mode that is only supported on L4.
So STM_MODE_ANALOG_ADC_CONTROL was moved to index 13 (last entry)
of gpio_mode table so that all the other modes are common and only the last
one is specific.
pull/3618/head
Laurent MEUNIER 2017-01-13 15:27:38 +01:00
parent 04a31f3b39
commit 42f6622f8e
54 changed files with 153 additions and 2371 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

93
targets/TARGET_STM/PinNamesTypes.h Normal file
View File

@ -0,0 +1,93 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PINNAMESTYPES_H
#define MBED_PINNAMESTYPES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// The last mode is only valid for specific families, so we put it in the end
#define STM_MODE_ANALOG_ADC_CONTROL (13)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif
#endif

49
targets/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -241,14 +202,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -188,14 +149,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -157,14 +118,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F042K6/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -156,14 +117,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -184,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -184,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -185,14 +146,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F1/TARGET_BLUEPILL_F103C8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -192,14 +153,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -203,14 +164,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -180,14 +141,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F2/TARGET_NUCLEO_F207ZG/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -254,14 +215,6 @@ typedef enum {
#define STDIO_UART_RX SERIAL_RX
#define STDIO_UART UART_3
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -244,14 +205,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -174,14 +135,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -184,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303K8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -159,14 +120,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -192,14 +153,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303ZE/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -259,14 +220,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -187,14 +148,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -275,14 +244,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_B96B_F446VE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -208,14 +177,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -167,14 +136,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -252,14 +221,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -216,14 +185,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F469NI/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -293,14 +262,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_ELMO_F411RE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -186,14 +155,6 @@ typedef enum {
RF_RXTX_SW = PC_13
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_F429_F439/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -243,14 +212,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -212,14 +181,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -150,14 +119,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -259,14 +228,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -176,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F410RB/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -176,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -176,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F412ZG/PinNames.h
View File

@ -17,51 +17,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -237,14 +198,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -176,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446ZE/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -244,14 +213,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

41
targets/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_EVK_ODIN_W2/PinNames.h
View File

@ -31,43 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03,
PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07,
@ -198,14 +167,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -307,14 +268,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F769NI/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -307,14 +268,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F7/TARGET_F746_F756/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -250,14 +211,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F767ZI/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -250,14 +211,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L053C8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -171,14 +132,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L011K4/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -155,14 +116,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -155,14 +116,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L053R8/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -184,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L073RZ/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -184,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L1/TARGET_MOTE_L152RC/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -183,14 +144,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -183,14 +144,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -176,14 +137,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

49
targets/TARGET_STM/TARGET_STM32L1/TARGET_XDOT_L151CC/PinNames.h
View File

@ -31,51 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -213,14 +174,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

50
targets/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/PinNames.h
View File

@ -31,52 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_ANALOG_ADC_CONTROL (6)
#define STM_MODE_IT_RISING (7)
#define STM_MODE_IT_FALLING (8)
#define STM_MODE_IT_RISING_FALLING (9)
#define STM_MODE_EVT_RISING (10)
#define STM_MODE_EVT_FALLING (11)
#define STM_MODE_EVT_RISING_FALLING (12)
#define STM_MODE_IT_EVT_RESET (13)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00, // On P1/P2 connectors
PA_1 = 0x01, // On P1/P2 connectors
@ -199,14 +159,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

50
targets/TARGET_STM/TARGET_STM32L4/TARGET_L476_L486/PinNames.h
View File

@ -31,52 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_ANALOG_ADC_CONTROL (6)
#define STM_MODE_IT_RISING (7)
#define STM_MODE_IT_FALLING (8)
#define STM_MODE_IT_RISING_FALLING (9)
#define STM_MODE_EVT_RISING (10)
#define STM_MODE_EVT_FALLING (11)
#define STM_MODE_EVT_RISING_FALLING (12)
#define STM_MODE_IT_EVT_RESET (13)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -185,14 +145,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

50
targets/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/PinNames.h
View File

@ -31,52 +31,12 @@
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7)))
#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
((PUPD & 0x07) << 4) |\
((AFNUM & 0x0F) << 7) |\
((CHANNEL & 0x1F) << 11) |\
((INVERTED & 0x01) << 16)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_ANALOG_ADC_CONTROL (6)
#define STM_MODE_IT_RISING (7)
#define STM_MODE_IT_FALLING (8)
#define STM_MODE_IT_RISING_FALLING (9)
#define STM_MODE_EVT_RISING (10)
#define STM_MODE_EVT_FALLING (11)
#define STM_MODE_EVT_RISING_FALLING (12)
#define STM_MODE_IT_EVT_RESET (13)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
@ -157,14 +117,6 @@ typedef enum {
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif

16
targets/TARGET_STM/TARGET_STM32L4/pinmap.c
View File

@ -41,14 +41,14 @@ static const uint32_t gpio_mode[14] = {
0x00000002, // 3 = GPIO_MODE_AF_PP
0x00000012, // 4 = GPIO_MODE_AF_OD
0x00000003, // 5 = GPIO_MODE_ANALOG
0x0000000B, // 6 = GPIO_MODE_ANALOG_ADC_CONTROL
0x10110000, // 7 = GPIO_MODE_IT_RISING
0x10210000, // 8 = GPIO_MODE_IT_FALLING
0x10310000, // 9 = GPIO_MODE_IT_RISING_FALLING
0x10120000, // 10 = GPIO_MODE_EVT_RISING
0x10220000, // 11 = GPIO_MODE_EVT_FALLING
0x10320000, // 12 = GPIO_MODE_EVT_RISING_FALLING
0x10000000 // 13 = Reset IT and EVT (not in STM32Cube HAL)
0x10110000, // 6 = GPIO_MODE_IT_RISING
0x10210000, // 7 = GPIO_MODE_IT_FALLING
0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
0x10120000, // 9 = GPIO_MODE_EVT_RISING
0x10220000, // 10 = GPIO_MODE_EVT_FALLING
0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
0x10000000, // 12 = Reset IT and EVT (not in STM32Cube HAL)
0x0000000B //13 = GPIO_MODE_ANALOG_ADC_CONTROL
};
// Enable GPIO clock and return GPIO base address