diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/startup_stm32l031xx.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/startup_stm32l031xx.S
new file mode 100644
index 0000000000..51ed9fc936
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/startup_stm32l031xx.S
@@ -0,0 +1,224 @@
+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32l053xx.s
+;* Author : MCD Application Team
+;* Version : V1.5.0
+;* Date : 8-January-2016
+;* Description : STM32l053xx Devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0+ processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+ EXPORT __initial_sp
+
+Stack_Mem SPACE Stack_Size
+__initial_sp EQU 0x20002000 ; Top of RAM
+
+
+; Heap Configuration
+; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Heap_Size EQU 0x00000400
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit EQU (__initial_sp - Stack_Size)
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1
+ DCD LPTIM1_IRQHandler ; LPTIM1
+ DCD 0 ; Reserved
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM21_IRQHandler ; TIM21
+ DCD 0 ; Reserved
+ DCD TIM22_IRQHandler ; TIM22
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD USART2_IRQHandler ; USART2
+ DCD LPUART1_IRQHandler ; LPUART1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM21_IRQHandler [WEAK]
+ EXPORT TIM22_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT LPUART1_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART2_IRQHandler
+LPUART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/stm32l031k6.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/stm32l031k6.sct
new file mode 100644
index 0000000000..dc8e7b2b03
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/stm32l031k6.sct
@@ -0,0 +1,44 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32L031K6: 32KB FLASH (0x8000) + 8KB RAM (0x2000)
+LR_IROM1 0x08000000 0x8000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x8000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 48 vectors = 192 bytes (0xC0) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0xC0) (0x2000-0xC0) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/sys.cpp
new file mode 100644
index 0000000000..bb665909b9
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_MICRO/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/startup_stm32l031xx.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/startup_stm32l031xx.S
new file mode 100644
index 0000000000..01380b68f9
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/startup_stm32l031xx.S
@@ -0,0 +1,203 @@
+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32l053xx.s
+;* Author : MCD Application Team
+;* Version : V1.5.0
+;* Date : 8-January-2016
+;* Description : STM32l053xx Devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0+ processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+__initial_sp EQU 0x20002000 ; Top of RAM
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1
+ DCD LPTIM1_IRQHandler ; LPTIM1
+ DCD 0 ; Reserved
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM21_IRQHandler ; TIM21
+ DCD 0 ; Reserved
+ DCD TIM22_IRQHandler ; TIM22
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD USART2_IRQHandler ; USART2
+ DCD LPUART1_IRQHandler ; LPUART1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_1_IRQHandler [WEAK]
+ EXPORT EXTI2_3_IRQHandler [WEAK]
+ EXPORT EXTI4_15_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+ EXPORT ADC1_COMP_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM21_IRQHandler [WEAK]
+ EXPORT TIM22_IRQHandler [WEAK]
+ EXPORT I2C1_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT LPUART1_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART2_IRQHandler
+LPUART1_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/stm32l031k6.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/stm32l031k6.sct
new file mode 100644
index 0000000000..dc8e7b2b03
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/stm32l031k6.sct
@@ -0,0 +1,44 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32L031K6: 32KB FLASH (0x8000) + 8KB RAM (0x2000)
+LR_IROM1 0x08000000 0x8000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x8000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 48 vectors = 192 bytes (0xC0) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0xC0) (0x2000-0xC0) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/sys.cpp
new file mode 100644
index 0000000000..bb665909b9
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_ARM_STD/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_GCC_ARM/STM32L031K6.ld b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_GCC_ARM/STM32L031K6.ld
new file mode 100644
index 0000000000..394de87906
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_GCC_ARM/STM32L031K6.ld
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 32k
+ RAM (rwx) : ORIGIN = 0x200000C0, LENGTH = 8K - 0xC0
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_GCC_ARM/startup_stm32l031xx.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_GCC_ARM/startup_stm32l031xx.S
new file mode 100644
index 0000000000..c8063a7c88
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_GCC_ARM/startup_stm32l031xx.S
@@ -0,0 +1,276 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32l031xx.s
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 8-January-2016
+ * @brief STM32L031xx Devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0+ processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0plus
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ //bl __libc_init_array
+/* Call the application's entry point.*/
+ //bl main
+ bl _start
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detection */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word LPTIM1_IRQHandler /* LPTIM1 */
+ .word 0 /* Reserved */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM21_IRQHandler /* TIM21 */
+ .word 0 /* Reserved */
+ .word TIM22_IRQHandler /* TIM22 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word USART2_IRQHandler /* USART2 */
+ .word LPUART1_IRQHandler /* LPUART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak LPTIM1_IRQHandler
+ .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM21_IRQHandler
+ .thumb_set TIM21_IRQHandler,Default_Handler
+
+ .weak TIM22_IRQHandler
+ .thumb_set TIM22_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak LPUART1_IRQHandler
+ .thumb_set LPUART1_IRQHandler,Default_Handler
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_IAR/startup_stm32l031xx.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_IAR/startup_stm32l031xx.S
new file mode 100644
index 0000000000..c9fbb7bf68
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_IAR/startup_stm32l031xx.S
@@ -0,0 +1,286 @@
+;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32l031xx.s
+;* Author : MCD Application Team
+;* Version : V1.5.0
+;* Date : 8-January-2016
+;* Description : STM32L031xx Ultra Low Power Devices vector
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == _iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* - Configure the system clock
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M0+ processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************/
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD RTC_IRQHandler ; RTC through EXTI Line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
+ DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
+ DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
+ DCD 0 ; Reserved
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
+ DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+ DCD ADC1_COMP_IRQHandler ; ADC1, COMP1
+ DCD LPTIM1_IRQHandler ; LPTIM1
+ DCD 0 ; Reserved
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM21_IRQHandler ; TIM21
+ DCD 0 ; Reserved
+ DCD TIM22_IRQHandler ; TIM22
+ DCD I2C1_IRQHandler ; I2C1
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD USART2_IRQHandler ; USART2
+ DCD LPUART1_IRQHandler ; LPUART1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+
+ PUBWEAK EXTI0_1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+ B EXTI0_1_IRQHandler
+
+
+ PUBWEAK EXTI2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+ B EXTI2_3_IRQHandler
+
+
+ PUBWEAK EXTI4_15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+ B EXTI4_15_IRQHandler
+
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+
+ PUBWEAK DMA1_Channel2_3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+ B DMA1_Channel2_3_IRQHandler
+
+
+ PUBWEAK DMA1_Channel4_5_6_7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_6_7_IRQHandler
+ B DMA1_Channel4_5_6_7_IRQHandler
+
+
+ PUBWEAK ADC1_COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+ B ADC1_COMP_IRQHandler
+
+
+ PUBWEAK LPTIM1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+LPTIM1_IRQHandler
+ B LPTIM1_IRQHandler
+
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+
+ PUBWEAK TIM21_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM21_IRQHandler
+ B TIM21_IRQHandler
+
+ PUBWEAK TIM22_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM22_IRQHandler
+ B TIM22_IRQHandler
+
+
+ PUBWEAK I2C1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+ B I2C1_IRQHandler
+
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+
+ PUBWEAK LPUART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+LPUART1_IRQHandler
+ B LPUART1_IRQHandler
+
+ END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_IAR/stm32l031xx.icf b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_IAR/stm32l031xx.icf
new file mode 100644
index 0000000000..5f4a5d3521
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/TOOLCHAIN_IAR/stm32l031xx.icf
@@ -0,0 +1,30 @@
+/* [ROM = 32kb = 0x8000] */
+define symbol __intvec_start__ = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__ = 0x08007FFF;
+
+/* [RAM = 8kb = 0x2000] Vector table dynamic copy: 48 vectors = 192 bytes (0xC0) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x200000BF; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x200000C0;
+define symbol __region_RAM_end__ = 0x20001FFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+define symbol __size_cstack__ = 0x500;
+define symbol __size_heap__ = 0x1000;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis.h
new file mode 100644
index 0000000000..eaecefae59
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis.h
@@ -0,0 +1,38 @@
+/* mbed Microcontroller Library
+ * A generic CMSIS include header
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_H
+#define MBED_CMSIS_H
+
+#include "stm32l0xx.h"
+#include "cmsis_nvic.h"
+
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis_nvic.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis_nvic.c
new file mode 100644
index 0000000000..2da63fc9af
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis_nvic.c
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+ uint32_t *vectors = (uint32_t *)SCB->VTOR;
+ uint32_t i;
+
+ // Copy and switch to dynamic vectors if the first time called
+ if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+ uint32_t *old_vectors = vectors;
+ vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+ for (i=0; iVTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis_nvic.h
new file mode 100644
index 0000000000..64c689a3b0
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/cmsis_nvic.h
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 32 vectors = 128 bytes from 0x40 to 0xBF
+// Total: 48 vectors = 192 bytes (0xC0) to be reserved in RAM
+#define NVIC_NUM_VECTORS 48
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/hal_tick.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/hal_tick.c
new file mode 100644
index 0000000000..9e42da7a4e
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/hal_tick.c
@@ -0,0 +1,145 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#include "hal_tick.h"
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void us_ticker_irq_handler(void);
+void set_compare(uint16_t count);
+
+extern volatile uint32_t SlaveCounter;
+extern volatile uint32_t oc_int_part;
+extern volatile uint16_t oc_rem_part;
+
+void timer_irq_handler(void) {
+ uint16_t cval = TIM_MST->CNT;
+
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Clear Update interrupt flag
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) {
+ __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE);
+ SlaveCounter++;
+ }
+
+ // Channel 1 for mbed timeout
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
+ __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
+ if (oc_rem_part > 0) {
+ set_compare(oc_rem_part); // Finish the remaining time left
+ oc_rem_part = 0;
+ } else {
+ if (oc_int_part > 0) {
+ set_compare(0xFFFF);
+ oc_rem_part = cval; // To finish the counter loop the next time
+ oc_int_part--;
+ } else {
+ us_ticker_irq_handler();
+ }
+ }
+ }
+
+ // Channel 2 for HAL tick
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC2) == SET) {
+ __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC2);
+ uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+ if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+ // Increment HAL variable
+ HAL_IncTick();
+ // Prepare next interrupt
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+ PreviousVal = val;
+ }
+ }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Reset timer
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFFFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ HAL_TIM_Base_Init(&TimMasterHandle);
+
+ // Configure output compare channel 1 for mbed timeout (enabled later when used)
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+ // Configure output compare channel 2 for HAL tick
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+ PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+
+ // Configure interrupts
+ // Update interrupt used for 32-bit counter
+ // Output compare channel 1 interrupt for mbed timeout
+ // Output compare channel 2 interrupt for HAL tick
+ NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_IRQ);
+
+ // Enable interrupts
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_UPDATE); // For 32-bit counter
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); // For HAL tick
+
+ // Enable timer
+ HAL_TIM_Base_Start(&TimMasterHandle);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/hal_tick.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/hal_tick.h
new file mode 100644
index 0000000000..d726d76e45
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/hal_tick.h
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32l0xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM21
+#define TIM_MST_IRQ TIM21_IRQn
+#define TIM_MST_RCC __TIM21_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM21_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM21_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/stm32l031xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/stm32l031xx.h
new file mode 100644
index 0000000000..355646c4ee
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/stm32l031xx.h
@@ -0,0 +1,3641 @@
+/**
+ ******************************************************************************
+ * @file stm32l031xx.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 8-January-2016
+ * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral register's definitions, bits
+ * definitions and memory mapping for stm32l031xx devices.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral's registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l031xx
+ * @{
+ */
+
+#ifndef __STM32L031xx_H
+#define __STM32L031xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals
+ */
+#define __CM0PLUS_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32L0xx provides no MPU */
+#define __VTOR_PRESENT 1 /*!< Vector Table Register supported */
+#define __NVIC_PRIO_BITS 2 /*!< STM32L0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief stm32l031xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+/*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers ******************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0+ Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0+ SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0+ Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0+ System Tick Interrupt */
+
+/****** STM32L-0 specific Interrupt Numbers *********************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detect Interrupt */
+ RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */
+ FLASH_IRQn = 3, /*!< FLASH Interrupt */
+ RCC_IRQn = 4, /*!< RCC Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts */
+ LPTIM1_IRQn = 13, /*!< LPTIM1 Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 Interrupt */
+ TIM21_IRQn = 20, /*!< TIM21 Interrupt */
+ TIM22_IRQn = 22, /*!< TIM22 Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 Interrupt */
+ USART2_IRQn = 28, /*!< USART2 Interrupt */
+ LPUART1_IRQn = 29, /*!< LPUART1 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0plus.h"
+#include "system_stm32l0xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+ uint32_t RESERVED5[28]; /*!< Reserved, 0x44 - 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC data register, Address offset:0xB4 */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x18 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+
+/**
+* @brief CRC calculation unit
+*/
+
+typedef struct
+{
+__IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+__IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+uint8_t RESERVED0; /*!< Reserved, 0x05 */
+uint16_t RESERVED1; /*!< Reserved, 0x06 */
+__IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+uint32_t RESERVED2; /*!< Reserved, 0x0C */
+__IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+__IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSELR; /*!< DMA channel selection register, Address offset: 0xA8 */
+} DMA_Request_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l0xx
+ * @{
+ */
+
+#ifndef __STM32L0xx_H
+#define __STM32L0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32L0)
+#define STM32L0
+#endif /* STM32L0 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32L011xx) && !defined (STM32L021xx) && \
+ !defined (STM32L031xx) && !defined (STM32L041xx) && \
+ !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \
+ !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \
+ !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \
+ !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) \
+ /* #define STM32L011xx */
+ /* #define STM32L021xx */
+#define STM32L031xx /*!< STM32L031C6, STM32L031E6, STM32L031F6, STM32L031G6, STM32L031K6 Devices */
+ /* #define STM32L041xx */ /*!< STM32L041C6, STM32L041E6, STM32L041F6, STM32L041G6, STM32L041K6 Devices */
+ /* #define STM32L051xx */ /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */
+ /* #define STM32L052xx */ /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */
+ /* #define STM32L053xx */ /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */
+ /* #define STM32L061xx */ /*!< */
+ /* #define STM32L062xx */ /*!< STM32L062K8 */
+ /* #define STM32L063xx */ /*!< STM32L063C8, STM32L063R8 */
+ /* #define STM32L071xx */ /*!< */
+ /* #define STM32L072xx */ /*!< */
+ /* #define STM32L073xx */ /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */
+ /* #define STM32L081xx */ /*!< */
+ /* #define STM32L082xx */ /*!< */
+ /* #define STM32L083xx */ /*!< */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V1.2.0RC1
+ */
+#define __STM32L0xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32L0xx_CMSIS_DEVICE_VERSION_RC (0x01) /*!< [7:0] release candidate */
+#define __STM32L0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+ |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+#if defined(STM32L011xx)
+ #include "stm32l011xx.h"
+#elif defined(STM32L021xx)
+ #include "stm32l021xx.h"
+#elif defined(STM32L031xx)
+ #include "stm32l031xx.h"
+#elif defined(STM32L041xx)
+ #include "stm32l041xx.h"
+#elif defined(STM32L051xx)
+ #include "stm32l051xx.h"
+#elif defined(STM32L052xx)
+ #include "stm32l052xx.h"
+#elif defined(STM32L053xx)
+ #include "stm32l053xx.h"
+#elif defined(STM32L062xx)
+ #include "stm32l062xx.h"
+#elif defined(STM32L063xx)
+ #include "stm32l063xx.h"
+#elif defined(STM32L061xx)
+ #include "stm32l061xx.h"
+#elif defined(STM32L071xx)
+ #include "stm32l071xx.h"
+#elif defined(STM32L072xx)
+ #include "stm32l072xx.h"
+#elif defined(STM32L073xx)
+ #include "stm32l073xx.h"
+#elif defined(STM32L082xx)
+ #include "stm32l082xx.h"
+#elif defined(STM32L083xx)
+ #include "stm32l083xx.h"
+#elif defined(STM32L081xx)
+ #include "stm32l081xx.h"
+#else
+ #error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32l0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L0xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/stm32l0xx_hal_conf.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/stm32l0xx_hal_conf.h
new file mode 100644
index 0000000000..d2a443b763
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/stm32l0xx_hal_conf.h
@@ -0,0 +1,313 @@
+/**
+ ******************************************************************************
+ * @file stm32l0xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 8-January-2016
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32l0xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_CONF_H
+#define __STM32L0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+/* #define HAL_DAC_MODULE_ENABLED */
+#define HAL_DMA_MODULE_ENABLED
+/* #define HAL_FIREWALL_MODULE_ENABLED */
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/* #define HAL_I2S_MODULE_ENABLED */
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+/* #define HAL_TSC_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+/* #define HAL_PCD_MODULE_ENABLED */
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)200) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ * This value is the default MSI range value after Reset.
+ */
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE ((uint32_t)2000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator for USB (HSI48) value.
+ */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)37000) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY (((uint32_t)1<<__NVIC_PRIO_BITS) - 1) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define PREREAD_ENABLE 0
+#define BUFFER_CACHE_DISABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32l0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32l0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32l0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32l0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32l0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32l0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32l0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32l0xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32l0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FIREWALL_MODULE_ENABLED
+ #include "stm32l0xx_hal_firewall.h"
+#endif /* HAL_FIREWALL_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32l0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32l0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32l0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32l0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32l0xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32l0xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32l0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32l0xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32l0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32l0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32l0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32l0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32l0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32l0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32l0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32l0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32l0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32l0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32l0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L0xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/system_stm32l0xx.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/system_stm32l0xx.c
new file mode 100644
index 0000000000..c45e6f07d3
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/system_stm32l0xx.c
@@ -0,0 +1,534 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l0xx.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 8-January-2016
+ * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32l0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * This file configures the system clock as follows:
+ *-----------------------------------------------------------------------------
+ * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
+ * | (external 8 MHz clock) | (internal 16 MHz)
+ * | 2- PLL_HSE_XTAL |
+ * | (external 8 MHz xtal) |
+ *-----------------------------------------------------------------------------
+ * SYSCLK(MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * AHBCLK (MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * APB1CLK (MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * APB2CLK (MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * USB capable (48 MHz precise clock) | YES | YES
+ *-----------------------------------------------------------------------------
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32l0xx.h"
+#include "hal_tick.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE ((uint32_t)2000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Defines
+ * @{
+ */
+/************************* Miscellaneous Configuration ************************/
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Macros
+ * @{
+ */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (0) /* Use external clock */
+#define USE_PLL_HSE_XTAL (0) /* Use external xtal */
+#define USE_MSI_OSC (0) /* Use multi-speed internal RC oscillator */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+uint32_t SystemCoreClock = 32000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+uint8_t SetSysClock_MSI(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * @param None
+ * @retval None
+ */
+void SystemInit (void)
+{
+/*!< Set MSION bit */
+ RCC->CR |= (uint32_t)0x00000100;
+
+ /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
+ RCC->CFGR &= (uint32_t) 0x88FF400C;
+
+ /*!< Reset HSION, HSIDIVEN, HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFF6;
+
+ /*!< Reset HSI48ON bit */
+ RCC->CRRCR &= (uint32_t)0xFFFFFFFE;
+
+ /*!< Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
+ RCC->CFGR &= (uint32_t)0xFF02FFFF;
+
+ /*!< Disable all interrupts */
+ RCC->CIER = 0x00000000;
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+ /* Configure the Cube driver */
+ SystemCoreClock = 8000000; // At this stage the HSI is used as system clock
+ HAL_Init();
+
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings */
+ SetSysClock();
+
+ /* Reset the timer to avoid issues after the RAM initialization */
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+}
+
+/**
+ * @brief Update SystemCoreClock according to Clock Register Values
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI
+ * value as defined by the MSI range.
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32l0xx_hal.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32l0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* MSI used as system clock */
+ msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
+ SystemCoreClock = (32768 * (1 << (msirange + 1)));
+ break;
+ case 0x04: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x08: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x0C: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
+ plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
+ pllmul = PLLMulTable[(pllmul >> 18)];
+ plldiv = (plldiv >> 22) + 1;
+
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+ if (pllsource == 0x00)
+ {
+ /* HSI oscillator clock selected as PLL clock entry */
+ SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
+ }
+ else
+ {
+ /* HSE selected as PLL clock entry */
+ SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
+ }
+ break;
+ default: /* MSI used as system clock */
+ msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
+ SystemCoreClock = (32768 * (1 << (msirange + 1)));
+ break;
+ }
+ /* Compute HCLK clock frequency --------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+ #if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+ #endif
+ {
+ /* 3- If fail try to start with MSI */
+ #if USE_MSI_OSC != 0
+ if (SetSysClock_MSI() == 0)
+ #endif
+ {
+ /* 4- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0)
+ {
+ while(1)
+ {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI48, RCC_MCODIV_1);
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* Used to gain time after DeepSleep in case HSI is used */
+ if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ return 0;
+ }
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /* Enable HSE and HSI48 oscillators and activate PLL with HSE as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
+ if (bypass == 0)
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
+ }
+ else
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
+ }
+ RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
+#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) && \
+ !defined (STM32L011xx) && !defined (STM32L021xx)
+ RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; /* For USB and RNG clock */
+#endif
+ // PLLCLK = (8 MHz * 8)/2 = 32 MHz
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_8;
+ RCC_OscInitStruct.PLL.PLLDIV = RCC_PLLDIV_2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //if (bypass == 0)
+ // HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
+ //else
+ // HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /* Enable HSI and HSI48 oscillators and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI48;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) && \
+ !defined (STM32L011xx) && !defined (STM32L021xx)
+ RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; /* For USB and RNG clock */
+#endif
+ // PLLCLK = (16 MHz * 4)/2 = 32 MHz
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
+ RCC_OscInitStruct.PLL.PLLDIV = RCC_PLLDIV_2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+
+/******************************************************************************/
+/* MSI (4Mhz) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_MSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* Enable MSI Oscillator */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+ RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6;
+ RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct)!= HAL_OK)
+ {
+ /* Initialization Error */
+ return 0;
+ }
+
+ /* Select MSI as system clock source and configure the HCLK, PCLK1 and PCLK2
+ clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI; // 4 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 4 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 4 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 4 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0)!= HAL_OK)
+ {
+ /* Initialization Error */
+ return 0;
+ }
+
+ /* Enable Power Control clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE3);
+
+ /* Disable Power Control clock */
+ __HAL_RCC_PWR_CLK_DISABLE();
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/system_stm32l0xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/system_stm32l0xx.h
new file mode 100644
index 0000000000..4a82de7134
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/system_stm32l0xx.h
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l0xx.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 8-January-2016
+ * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Header File.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l0xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32L0XX_H
+#define __SYSTEM_STM32L0XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32L0xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32L0xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32L0XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/