diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/startup_stm32f302x8.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/startup_stm32f302x8.s
new file mode 100644
index 0000000000..dc65a264bb
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/startup_stm32f302x8.s
@@ -0,0 +1,343 @@
+;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name : startup_stm32f302x8.s
+; STM32F302x8 Devices vector table for MDK ARM_MICRO toolchain
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+ EXPORT __initial_sp
+
+Stack_Mem SPACE Stack_Size
+__initial_sp EQU 0x20004000 ; Top of RAM
+
+
+; Heap Configuration
+; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Heap_Size EQU 0x00000400
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit EQU (__initial_sp - Stack_Size)
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_TSC_IRQHandler ; EXTI Line2 and Touch Sense controller
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD USB_HP_CAN_TX_IRQHandler ; USB Device High Priority or CAN TX
+ DCD USB_LP_CAN_RX0_IRQHandler ; USB Device Low Priority or CAN RX0
+ DCD CAN_RX1_IRQHandler ; CAN RX1
+ DCD CAN_SCE_IRQHandler ; CAN SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD 0 ; Reserved
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD COMP2_IRQHandler ; COMP2
+ DCD COMP4_6_IRQHandler ; COMP4 and COMP6
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C3_EV_IRQHandler ; I2C3 Event
+ DCD I2C3_ER_IRQHandler ; I2C3 Error
+ DCD USB_HP_IRQHandler ; USB High Priority remap
+ DCD USB_LP_IRQHandler ; USB Low Priority remap
+ DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD FPU_IRQHandler ; FPU
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_TSC_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT USB_HP_CAN_TX_IRQHandler [WEAK]
+ EXPORT USB_LP_CAN_RX0_IRQHandler [WEAK]
+ EXPORT CAN_RX1_IRQHandler [WEAK]
+ EXPORT CAN_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT USBWakeUp_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT COMP2_IRQHandler [WEAK]
+ EXPORT COMP4_6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT USB_HP_IRQHandler [WEAK]
+ EXPORT USB_LP_IRQHandler [WEAK]
+ EXPORT USBWakeUp_RMP_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_TSC_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+USB_HP_CAN_TX_IRQHandler
+USB_LP_CAN_RX0_IRQHandler
+CAN_RX1_IRQHandler
+CAN_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+SPI3_IRQHandler
+TIM6_DAC_IRQHandler
+COMP2_IRQHandler
+COMP4_6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+USB_HP_IRQHandler
+USB_LP_IRQHandler
+USBWakeUp_RMP_IRQHandler
+FPU_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f302x8.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f302x8.sct
new file mode 100644
index 0000000000..ce98168126
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f302x8.sct
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F302R8: 64KB FLASH + 16KB SRAM
+LR_IROM1 0x08000000 0x10000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x10000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 98 vectors (16 core + 82 peripheral) * 4 bytes = 392 bytes to reserve (0x188)
+ RW_IRAM1 (0x20000000+0x188) (0x4000-0x188) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/sys.cpp
new file mode 100644
index 0000000000..bb665909b9
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/startup_stm32f302x8.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/startup_stm32f302x8.s
new file mode 100644
index 0000000000..4f7f716d44
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/startup_stm32f302x8.s
@@ -0,0 +1,316 @@
+;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name : startup_stm32f302x8.s
+; STM32F302x8 Devices vector table for MDK ARM_STD toolchain
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+__initial_sp EQU 0x20004000 ; Top of RAM
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_TSC_IRQHandler ; EXTI Line2 and Touch Sense controller
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD USB_HP_CAN_TX_IRQHandler ; USB Device High Priority or CAN TX
+ DCD USB_LP_CAN_RX0_IRQHandler ; USB Device Low Priority or CAN RX0
+ DCD CAN_RX1_IRQHandler ; CAN RX1
+ DCD CAN_SCE_IRQHandler ; CAN SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD 0 ; Reserved
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD COMP2_IRQHandler ; COMP2
+ DCD COMP4_6_IRQHandler ; COMP4 and COMP6
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C3_EV_IRQHandler ; I2C3 Event
+ DCD I2C3_ER_IRQHandler ; I2C3 Error
+ DCD USB_HP_IRQHandler ; USB High Priority remap
+ DCD USB_LP_IRQHandler ; USB Low Priority remap
+ DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD FPU_IRQHandler ; FPU
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_TSC_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT USB_HP_CAN_TX_IRQHandler [WEAK]
+ EXPORT USB_LP_CAN_RX0_IRQHandler [WEAK]
+ EXPORT CAN_RX1_IRQHandler [WEAK]
+ EXPORT CAN_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT USBWakeUp_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT COMP2_IRQHandler [WEAK]
+ EXPORT COMP4_6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT USB_HP_IRQHandler [WEAK]
+ EXPORT USB_LP_IRQHandler [WEAK]
+ EXPORT USBWakeUp_RMP_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_TSC_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+USB_HP_CAN_TX_IRQHandler
+USB_LP_CAN_RX0_IRQHandler
+CAN_RX1_IRQHandler
+CAN_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+SPI3_IRQHandler
+TIM6_DAC_IRQHandler
+COMP2_IRQHandler
+COMP4_6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+USB_HP_IRQHandler
+USB_LP_IRQHandler
+USBWakeUp_RMP_IRQHandler
+FPU_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f302x8.sct b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f302x8.sct
new file mode 100644
index 0000000000..ce98168126
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f302x8.sct
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F302R8: 64KB FLASH + 16KB SRAM
+LR_IROM1 0x08000000 0x10000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x10000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 98 vectors (16 core + 82 peripheral) * 4 bytes = 392 bytes to reserve (0x188)
+ RW_IRAM1 (0x20000000+0x188) (0x4000-0x188) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/sys.cpp b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/sys.cpp
new file mode 100644
index 0000000000..bb665909b9
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/startup_stm32f302x8.s b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/startup_stm32f302x8.s
new file mode 100644
index 0000000000..9e5bda0931
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/startup_stm32f302x8.s
@@ -0,0 +1,485 @@
+;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name : startup_stm32f302x8.s
+;* Author : MCD Application Team
+;* Version : V2.1.0
+;* Date : 12-Sept-2014
+;* Description : STM32F302x6/STM32F302x8 devices vector table for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == _iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* © COPYRIGHT(c) 2014 STMicroelectronics
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_TSC_IRQHandler ; EXTI Line2 and Touch Sense controller
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD USB_HP_CAN_TX_IRQHandler ; USB Device High Priority or CAN TX
+ DCD USB_LP_CAN_RX0_IRQHandler ; USB Device Low Priority or CAN RX0
+ DCD CAN_RX1_IRQHandler ; CAN RX1
+ DCD CAN_SCE_IRQHandler ; CAN SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD 0 ; Reserved
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1 underrun errors
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD COMP2_IRQHandler ; COMP2
+ DCD COMP4_6_IRQHandler ; COMP4 and COMP6
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C3_EV_IRQHandler ; I2C3 Event
+ DCD I2C3_ER_IRQHandler ; I2C3 Error
+ DCD USB_HP_IRQHandler ; USB High Priority remap
+ DCD USB_LP_IRQHandler ; USB Low Priority remap
+ DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD FPU_IRQHandler ; FPU
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMP_STAMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TAMP_STAMP_IRQHandler
+ B TAMP_STAMP_IRQHandler
+
+ PUBWEAK RTC_WKUP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_WKUP_IRQHandler
+ B RTC_WKUP_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_TSC_IRQHandler
+ B EXTI2_TSC_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK USB_HP_CAN_TX_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_HP_CAN_TX_IRQHandler
+ B USB_HP_CAN_TX_IRQHandler
+
+ PUBWEAK USB_LP_CAN_RX0_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_LP_CAN_RX0_IRQHandler
+ B USB_LP_CAN_RX0_IRQHandler
+
+ PUBWEAK CAN_RX1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CAN_RX1_IRQHandler
+ B CAN_RX1_IRQHandler
+
+ PUBWEAK CAN_SCE_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CAN_SCE_IRQHandler
+ B CAN_SCE_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+ B TIM1_BRK_TIM15_IRQHandler
+
+ PUBWEAK TIM1_UP_TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+ B TIM1_UP_TIM16_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+ B TIM1_TRG_COM_TIM17_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTC_Alarm_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_Alarm_IRQHandler
+ B RTC_Alarm_IRQHandler
+
+ PUBWEAK USBWakeUp_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USBWakeUp_IRQHandler
+ B USBWakeUp_IRQHandler
+
+ PUBWEAK SPI3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI3_IRQHandler
+ B SPI3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK COMP2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+COMP2_IRQHandler
+ B COMP2_IRQHandler
+
+ PUBWEAK COMP4_6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+COMP4_6_IRQHandler
+ B COMP4_6_IRQHandler
+
+ PUBWEAK I2C3_EV_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C3_EV_IRQHandler
+ B I2C3_EV_IRQHandler
+
+ PUBWEAK I2C3_ER_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C3_ER_IRQHandler
+ B I2C3_ER_IRQHandler
+
+ PUBWEAK USB_HP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_HP_IRQHandler
+ B USB_HP_IRQHandler
+
+ PUBWEAK USB_LP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_LP_IRQHandler
+ B USB_LP_IRQHandler
+
+ PUBWEAK USBWakeUp_RMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USBWakeUp_RMP_IRQHandler
+ B USBWakeUp_RMP_IRQHandler
+
+ PUBWEAK FPU_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FPU_IRQHandler
+ B FPU_IRQHandler
+
+ END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f302x8.icf b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f302x8.icf
new file mode 100644
index 0000000000..eb65e3f7ba
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f302x8.icf
@@ -0,0 +1,30 @@
+/* [ROM = 64kb = 0x10000] */
+define symbol __intvec_start__ = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__ = 0x0800FFFF;
+
+/* [RAM = 16kb = 0x4000] Vector table dynamic copy: 98 vectors = 392 bytes (0x188) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x20000191; /* Add 4 more bytes to be aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000192;
+define symbol __region_RAM_end__ = 0x20003FFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+define symbol __size_cstack__ = 0x400;
+define symbol __size_heap__ = 0x400;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis.h
new file mode 100644
index 0000000000..8b9ba0fc38
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis.h
@@ -0,0 +1,38 @@
+/* mbed Microcontroller Library
+ * A generic CMSIS include header
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_H
+#define MBED_CMSIS_H
+
+#include "stm32f3xx.h"
+#include "cmsis_nvic.h"
+
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis_nvic.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis_nvic.c
new file mode 100644
index 0000000000..2da63fc9af
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis_nvic.c
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+ uint32_t *vectors = (uint32_t *)SCB->VTOR;
+ uint32_t i;
+
+ // Copy and switch to dynamic vectors if the first time called
+ if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+ uint32_t *old_vectors = vectors;
+ vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+ for (i=0; iVTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis_nvic.h
new file mode 100644
index 0000000000..43f761e5b7
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/cmsis_nvic.h
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F302R8
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 82 vectors = 328 bytes from 0x40 to 0x187
+// Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
+#define NVIC_NUM_VECTORS 98
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/hal_tick.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/hal_tick.c
new file mode 100644
index 0000000000..1247b98cb9
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/hal_tick.c
@@ -0,0 +1,120 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#include "hal_tick.h"
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+ // Channel 1 for mbed timeout
+ if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+ us_ticker_irq_handler();
+ }
+
+ // Channel 2 for HAL tick
+ if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+ uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+ if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+ // Increment HAL variable
+ HAL_IncTick();
+ // Prepare next interrupt
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+ PreviousVal = val;
+#if 0 // For DEBUG only
+ HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
+#endif
+ }
+ }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Reset timer
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFFFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ TimMasterHandle.Init.RepetitionCounter = 0;
+ HAL_TIM_OC_Init(&TimMasterHandle);
+
+ NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_IRQ);
+
+ // Channel 1 for mbed timeout
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+ // Channel 2 for HAL tick
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+ PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if 0 // For DEBUG only
+ __GPIOB_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct;
+ GPIO_InitStruct.Pin = GPIO_PIN_6;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+#endif
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/hal_tick.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/hal_tick.h
new file mode 100644
index 0000000000..e8acd8c64b
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/hal_tick.h
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f3xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM2
+#define TIM_MST_IRQ TIM2_IRQn
+#define TIM_MST_RCC __TIM2_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM2_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM2_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/stm32f302x8.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/stm32f302x8.h
new file mode 100644
index 0000000000..0bd53c4f0b
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/stm32f302x8.h
@@ -0,0 +1,6367 @@
+/**
+ ******************************************************************************
+ * @file stm32f302x8.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 12-Sept-2014
+ * @brief CMSIS STM32F302x6/STM32F302x8 Devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f302x8
+ * @{
+ */
+
+#ifndef __STM32F302x8_H
+#define __STM32F302x8_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 0 /*!< STM32F302x6/STM32F302x8 devices do not provide an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F302x6/STM32F302x8 devices use 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< STM32F302x6/STM32F302x8 devices provide an FPU */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F302x6/STM32F302x8 device Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line 19 */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line 20 */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_TSC_IRQn = 8, /*!< EXTI Line2 Interrupt and Touch Sense Controller Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */
+ ADC1_IRQn = 18, /*!< ADC1 Interrupts */
+ USB_HP_CAN_TX_IRQn = 19, /*!< USB Device High Priority or CAN TX Interrupts */
+ USB_LP_CAN_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN RX0 Interrupts */
+ CAN_RX1_IRQn = 21, /*!< CAN RX1 Interrupt */
+ CAN_SCE_IRQn = 22, /*!< CAN SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt & EXTI Line24 Interrupt (I2C2 wakeup) */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt & EXTI Line28 Interrupt (USART3 wakeup) */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line 17 Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Wakeup Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC channel1 underrun error Interrupt */
+ COMP2_IRQn = 64, /*!< COMP2 global Interrupt via EXTI Line22 */
+ COMP4_6_IRQn = 65, /*!< COMP4 and COMP6 global Interrupt via EXTI Line30 and 32 */
+ I2C3_EV_IRQn = 72, /*!< I2C3 Event Interrupt & EXTI Line27 Interrupt (I2C3 wakeup) */
+ I2C3_ER_IRQn = 73, /*!< I2C3 Error Interrupt */
+ USB_HP_IRQn = 74, /*!< USB High Priority global Interrupt remap */
+ USB_LP_IRQn = 75, /*!< USB Low Priority global Interrupt remap */
+ USBWakeUp_RMP_IRQn = 76, /*!< USB Wakeup Interrupt remap */
+ FPU_IRQn = 81 /*!< Floating point Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f3xx.h" /* STM32F3xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */
+ uint32_t RESERVED0; /*!< Reserved, 0x010 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, 0x01C */
+ __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */
+ __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */
+ __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x02C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */
+ uint32_t RESERVED3; /*!< Reserved, 0x044 */
+ uint32_t RESERVED4; /*!< Reserved, 0x048 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */
+ uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */
+ __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */
+ __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */
+ __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */
+ __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */
+ uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */
+ uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */
+ __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */
+ __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */
+ uint32_t RESERVED8; /*!< Reserved, 0x0A8 */
+ uint32_t RESERVED9; /*!< Reserved, 0x0AC */
+ __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */
+
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */
+ uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1/3 base address + 0x30C */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief Analog Comparators
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t RESERVED0; /*!< Reserved, 0x14 */
+ __IO uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ __IO uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt clear flag register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x20 */
+ __IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x24 */
+ __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register, Address offset: 0x28 */
+ __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register, Address offset: 0x2C */
+ __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register, Address offset: 0x30 */
+ __IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x34 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!< FLASH address register, Address offset: 0x14 */
+ uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!< FLASH Option byte register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!< FLASH Write register, Address offset: 0x20 */
+
+} FLASH_TypeDef;
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!© COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx
+ * @{
+ */
+
+#ifndef __STM32F3xx_H
+#define __STM32F3xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F301x8) && !defined (STM32F302x8) && !defined (STM32F318xx) && \
+ !defined (STM32F302xC) && !defined (STM32F303xC) && !defined (STM32F358xx) && \
+ !defined (STM32F303x8) && !defined (STM32F334x8) && !defined (STM32F328xx) && \
+ !defined (STM32F302xE) && !defined (STM32F303xE) && !defined (STM32F398xx) && \
+ !defined (STM32F373xC) && !defined (STM32F378xx)
+
+ /* #define STM32F301x8 */ /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8,
+ STM32F301R6 and STM32F301R8 Devices */
+#define STM32F302x8 /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8,
+ STM32F302R6 and STM32F302R8 Devices */
+ /* #define STM32F302xC */ /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC, STM32F302VB and STM32F302VC Devices */
+ /* #define STM32F302xE */ /*!< STM32F302CE, STM32F302RE, and STM32F302VE Devices */
+ /* #define STM32F303x8 */ /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8,
+ STM32F303R6 and STM32F303R8 Devices */
+ /* #define STM32F303xC */ /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC, STM32F303VB and STM32F303VC Devices */
+ /* #define STM32F303xE */ /*!< STM32F303RE, STM32F303VE and STM32F303ZE Devices */
+ /* #define STM32F373xC */ /*!< STM32F373C8, STM32F373CB, STM32F373CC, STM32F373R8, STM32F373RB, STM32F373RC,
+ STM32F373V8, STM32F373VB and STM32F373VC Devices */
+ /* #define STM32F334x8 */ /*!< STM32F334C4, STM32F334C6, STM32F334C8, STM32F334R4, STM32F334R6 and STM32F334R8 Devices */
+ /* #define STM32F318xx */ /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */
+ /* #define STM32F328xx */ /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */
+ /* #define STM32F358xx */ /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */
+ /* #define STM32F378xx */ /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */
+ /* #define STM32F398xx */ /*!< STM32F398CE, STM32F398RE, STM32F398VE: STM32F303xE with regulator off: STM32F398xx Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.1.0
+ */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+ |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F301x8)
+ #include "stm32f301x8.h"
+#elif defined(STM32F302x8)
+ #include "stm32f302x8.h"
+#elif defined(STM32F302xC)
+ #include "stm32f302xc.h"
+#elif defined(STM32F302xE)
+ #include "stm32f302xe.h"
+#elif defined(STM32F303x8)
+ #include "stm32f303x8.h"
+#elif defined(STM32F303xC)
+ #include "stm32f303xc.h"
+#elif defined(STM32F303xE)
+ #include "stm32f303xe.h"
+#elif defined(STM32F373xC)
+ #include "stm32f373xc.h"
+#elif defined(STM32F334x8)
+ #include "stm32f334x8.h"
+#elif defined(STM32F318xx)
+ #include "stm32f318xx.h"
+#elif defined(STM32F328xx)
+ #include "stm32f328xx.h"
+#elif defined(STM32F358xx)
+ #include "stm32f358xx.h"
+#elif defined(STM32F378xx)
+ #include "stm32f378xx.h"
+#elif defined(STM32F398xx)
+ #include "stm32f398xx.h"
+#else
+ #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f3xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F3xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/system_stm32f3xx.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/system_stm32f3xx.c
new file mode 100644
index 0000000000..c69d945b94
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/system_stm32f3xx.c
@@ -0,0 +1,457 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.c
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 12-Sept-2014
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f3xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f3xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *-----------------------------------------------------------------------------
+ * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
+ * | (external 8 MHz clock) | (internal 8 MHz)
+ * | 2- PLL_HSE_XTAL |
+ * | (external 8 MHz xtal) |
+ *-----------------------------------------------------------------------------
+ * SYSCLK(MHz) | 72 | 64
+ *-----------------------------------------------------------------------------
+ * AHBCLK (MHz) | 72 | 64
+ *-----------------------------------------------------------------------------
+ * APB1CLK (MHz) | 36 | 32
+ *-----------------------------------------------------------------------------
+ * APB2CLK (MHz) | 72 | 64
+ *-----------------------------------------------------------------------------
+ * USB capable (48 MHz precise clock) | NO | NO
+ *-----------------------------------------------------------------------------
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f3xx.h"
+#include "hal_tick.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Macros
+ * @{
+ */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (1) /* Use external clock */
+#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 72000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and the PLL configuration is reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR &= 0xF87FC00C;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */
+ RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+ /* Reset PREDIV1[3:0] bits */
+ RCC->CFGR2 &= (uint32_t)0xFFFFFFF0;
+
+ /* Reset USARTSW[1:0], I2CSW and TIMs bits */
+ RCC->CFGR3 &= (uint32_t)0xFF00FCCC;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+ /* Configure the Cube driver */
+ SystemCoreClock = 8000000; // At this stage the HSI is used as system clock
+ HAL_Init();
+
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings */
+ SetSysClock();
+
+ /* Reset the timer to avoid issues after the RAM initialization */
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+ }
+ else
+ {
+ /* HSI oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSI_VALUE / predivfactor) * pllmull;
+ }
+#else
+ if (pllsource == RCC_CFGR_PLLSRC_HSI_DIV2)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+ }
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+ #if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+ #endif
+ {
+ /* 3- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0)
+ {
+ while(1)
+ {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO, RCC_MCOSOURCE_SYSCLK, RCC_MCO_DIV1); // 72 MHz or 64 MHz
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* Enable HSE oscillator and activate PLL with HSE as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ if (bypass == 0)
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
+ }
+ else
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
+ }
+ RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; // 72 MHz (8 MHz * 9)
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 72 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 72 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 36 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 72 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //if (bypass == 0)
+ // HAL_RCC_MCOConfig(RCC_MCO, RCC_MCOSOURCE_HSE, RCC_MCO_DIV2); // 4 MHz with xtal
+ //else
+ // HAL_RCC_MCOConfig(RCC_MCO, RCC_MCOSOURCE_HSE, RCC_MCO_DIV1); // 8 MHz with ext clock
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* Enable HSI oscillator and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSICalibrationValue = 16;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; // 64 MHz (8 MHz/2 * 16)
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 64 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 64 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 32 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 64 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO, RCC_MCOSOURCE_HSI, RCC_MCO_DIV1); // 8 MHz
+
+ return 1; // OK
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/system_stm32f3xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/system_stm32f3xx.h
new file mode 100644
index 0000000000..d91ace096d
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/system_stm32f3xx.h
@@ -0,0 +1,124 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 12-Sept-2014
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F3xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F3XX_H
+#define __SYSTEM_STM32F3XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F3xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F3xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F3XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/