diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/startup_stm32l432xx.S b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/startup_stm32l432xx.S
new file mode 100644
index 0000000000..6362f5298d
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/startup_stm32l432xx.S
@@ -0,0 +1,366 @@
+;********************** COPYRIGHT(c) 2016 STMicroelectronics ******************
+;* File Name : startup_stm32l432xx.s
+;* Author : MCD Application Team
+;* Version : V1.1.1
+;* Date : 29-April-2016
+;* Description : STM32L432xx Ultra Low Power devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+ EXPORT __initial_sp
+
+__initial_sp EQU 0x2000C000 ; Top of RAM, L4-ECC-SRAM2 retained in standby
+
+; Heap Configuration
+; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Heap_Size EQU 0x0BA00 ; 46KB (48KB, -2*1KB for main thread and scheduler)
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
+ DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
+ DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD COMP_IRQHandler ; COMP Interrupt
+ DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
+ DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
+ DCD USB_IRQHandler ; USB FS
+ DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
+ DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
+ DCD LPUART1_IRQHandler ; LP UART1 interrupt
+ DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
+ DCD 0 ; Reserved
+ DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
+ DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD RNG_IRQHandler ; RNG global interrupt
+ DCD FPU_IRQHandler ; FPU
+ DCD CRS_IRQHandler ; CRS interrupt
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_PVM_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT CAN1_TX_IRQHandler [WEAK]
+ EXPORT CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Channel1_IRQHandler [WEAK]
+ EXPORT DMA2_Channel2_IRQHandler [WEAK]
+ EXPORT DMA2_Channel3_IRQHandler [WEAK]
+ EXPORT DMA2_Channel4_IRQHandler [WEAK]
+ EXPORT DMA2_Channel5_IRQHandler [WEAK]
+ EXPORT COMP_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT LPTIM2_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+ EXPORT DMA2_Channel6_IRQHandler [WEAK]
+ EXPORT DMA2_Channel7_IRQHandler [WEAK]
+ EXPORT LPUART1_IRQHandler [WEAK]
+ EXPORT QUADSPI_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT SAI1_IRQHandler [WEAK]
+ EXPORT SWPMI1_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT RNG_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT CRS_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_PVM_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+SPI3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_IRQHandler
+DMA2_Channel5_IRQHandler
+COMP_IRQHandler
+LPTIM1_IRQHandler
+LPTIM2_IRQHandler
+USB_IRQHandler
+DMA2_Channel6_IRQHandler
+DMA2_Channel7_IRQHandler
+LPUART1_IRQHandler
+QUADSPI_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+SAI1_IRQHandler
+SWPMI1_IRQHandler
+TSC_IRQHandler
+RNG_IRQHandler
+FPU_IRQHandler
+CRS_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/stm32l432xx.sct b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/stm32l432xx.sct
new file mode 100644
index 0000000000..184888d912
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/stm32l432xx.sct
@@ -0,0 +1,48 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2015, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; 256KB FLASH (0x40000) + 64KB SRAM (0x10000)
+LR_IROM1 0x08000000 0x40000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x40000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ RW_IRAM1 0x20000000 0x0000C000 { ; RW data 48k L4-SRAM1
+ .ANY (+RW +ZI)
+ }
+
+ ; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
+ RW_IRAM2 (0x10000000+0x188) (0x04000-0x188) { ; RW data 16k L4-ECC-SRAM2 retained in standby
+ .ANY (+RW +ZI)
+ }
+
+}
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/sys.cpp b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/sys.cpp
new file mode 100644
index 0000000000..bb665909b9
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_MICRO/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/startup_stm32l432xx.S b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/startup_stm32l432xx.S
new file mode 100644
index 0000000000..7a5810e6ac
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/startup_stm32l432xx.S
@@ -0,0 +1,349 @@
+;********************** COPYRIGHT(c) 2016 STMicroelectronics ******************
+;* File Name : startup_stm32l432xx.s
+;* Author : MCD Application Team
+;* Version : V1.1.1
+;* Date : 29-April-2016
+;* Description : STM32L432xx Ultra Low Power devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+
+__initial_sp EQU 0x2000C000 ; Top of RAM, L4-ECC-SRAM2 retained in standby
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
+ DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
+ DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD COMP_IRQHandler ; COMP Interrupt
+ DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
+ DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
+ DCD USB_IRQHandler ; USB FS
+ DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
+ DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
+ DCD LPUART1_IRQHandler ; LP UART1 interrupt
+ DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
+ DCD 0 ; Reserved
+ DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
+ DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD RNG_IRQHandler ; RNG global interrupt
+ DCD FPU_IRQHandler ; FPU
+ DCD CRS_IRQHandler ; CRS interrupt
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_PVM_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT CAN1_TX_IRQHandler [WEAK]
+ EXPORT CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Channel1_IRQHandler [WEAK]
+ EXPORT DMA2_Channel2_IRQHandler [WEAK]
+ EXPORT DMA2_Channel3_IRQHandler [WEAK]
+ EXPORT DMA2_Channel4_IRQHandler [WEAK]
+ EXPORT DMA2_Channel5_IRQHandler [WEAK]
+ EXPORT COMP_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT LPTIM2_IRQHandler [WEAK]
+ EXPORT USB_IRQHandler [WEAK]
+ EXPORT DMA2_Channel6_IRQHandler [WEAK]
+ EXPORT DMA2_Channel7_IRQHandler [WEAK]
+ EXPORT LPUART1_IRQHandler [WEAK]
+ EXPORT QUADSPI_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT SAI1_IRQHandler [WEAK]
+ EXPORT SWPMI1_IRQHandler [WEAK]
+ EXPORT TSC_IRQHandler [WEAK]
+ EXPORT RNG_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT CRS_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_PVM_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+SPI3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_IRQHandler
+DMA2_Channel5_IRQHandler
+COMP_IRQHandler
+LPTIM1_IRQHandler
+LPTIM2_IRQHandler
+USB_IRQHandler
+DMA2_Channel6_IRQHandler
+DMA2_Channel7_IRQHandler
+LPUART1_IRQHandler
+QUADSPI_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+SAI1_IRQHandler
+SWPMI1_IRQHandler
+TSC_IRQHandler
+RNG_IRQHandler
+FPU_IRQHandler
+CRS_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/stm32l432xx.sct b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/stm32l432xx.sct
new file mode 100644
index 0000000000..cdb1c3c84c
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/stm32l432xx.sct
@@ -0,0 +1,48 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2015, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; 256KB FLASH (0x40000) + 64KB SRAM (0x10000)
+LR_IROM1 0x08000000 0x40000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x40000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ RW_IRAM1 0x20000000 0x0000C000 { ; RW data 48k L4-SRAM1
+ .ANY (+RW +ZI)
+ }
+
+ ; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
+ RW_IRAM2 (0x10000000+0x188) (0x04000-0x188) { ; RW data 16k L4-ECC-SRAM2 retained in standby
+ .ANY (+RW +ZI)
+ }
+
+}
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/sys.cpp b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/sys.cpp
new file mode 100644
index 0000000000..bb665909b9
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_ARM_STD/sys.cpp
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+#include
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/STM32L432XX.ld b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/STM32L432XX.ld
new file mode 100644
index 0000000000..b8f52e70e8
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/STM32L432XX.ld
@@ -0,0 +1,154 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K
+ SRAM2 (rwx) : ORIGIN = 0x10000188, LENGTH = 16k - 0x188
+ SRAM1 (rwx) : ORIGIN = 0x20000000, LENGTH = 48k
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > SRAM1
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > SRAM1
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > SRAM1
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > SRAM1
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(SRAM1) + LENGTH(SRAM1);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/startup_stm32l432xx.S b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/startup_stm32l432xx.S
new file mode 100644
index 0000000000..cfc614e875
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/startup_stm32l432xx.S
@@ -0,0 +1,470 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32l432xx.s
+ * @author MCD Application Team
+ * @version V1.1.1
+ * @date 29-April-2016
+ * @brief STM32L432xx devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address,
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m4
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr sp, =_estack /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ //bl __libc_init_array
+/* Call the application's entry point.*/
+ //bl main
+ // Calling the crt0 'cold-start' entry point. There __libc_init_array is called
+ // and when existing hardware_init_hook() and software_init_hook() before
+ // starting main(). software_init_hook() is available and has to be called due
+ // to initializsation when using rtos.
+ bl _start
+ bx lr
+
+LoopForever:
+ b LoopForever
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_PVM_IRQHandler
+ .word TAMP_STAMP_IRQHandler
+ .word RTC_WKUP_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word CAN1_TX_IRQHandler
+ .word CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word 0
+ .word 0
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word 0
+ .word 0
+ .word SPI1_IRQHandler
+ .word 0
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word 0
+ .word EXTI15_10_IRQHandler
+ .word RTC_Alarm_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SPI3_IRQHandler
+ .word 0
+ .word 0
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word COMP_IRQHandler
+ .word LPTIM1_IRQHandler
+ .word LPTIM2_IRQHandler
+ .word USB_IRQHandler
+ .word DMA2_Channel6_IRQHandler
+ .word DMA2_Channel7_IRQHandler
+ .word LPUART1_IRQHandler
+ .word QUADSPI_IRQHandler
+ .word I2C3_EV_IRQHandler
+ .word I2C3_ER_IRQHandler
+ .word SAI1_IRQHandler
+ .word 0
+ .word SWPMI1_IRQHandler
+ .word TSC_IRQHandler
+ .word 0
+ .word 0
+ .word RNG_IRQHandler
+ .word FPU_IRQHandler
+ .word CRS_IRQHandler
+
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_PVM_IRQHandler
+ .thumb_set PVD_PVM_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_IRQHandler
+ .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+ .weak COMP_IRQHandler
+ .thumb_set COMP_IRQHandler,Default_Handler
+
+ .weak LPTIM1_IRQHandler
+ .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+ .weak LPTIM2_IRQHandler
+ .thumb_set LPTIM2_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel6_IRQHandler
+ .thumb_set DMA2_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel7_IRQHandler
+ .thumb_set DMA2_Channel7_IRQHandler,Default_Handler
+
+ .weak LPUART1_IRQHandler
+ .thumb_set LPUART1_IRQHandler,Default_Handler
+
+ .weak QUADSPI_IRQHandler
+ .thumb_set QUADSPI_IRQHandler,Default_Handler
+
+ .weak I2C3_EV_IRQHandler
+ .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+ .weak I2C3_ER_IRQHandler
+ .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+ .weak SAI1_IRQHandler
+ .thumb_set SAI1_IRQHandler,Default_Handler
+
+ .weak SWPMI1_IRQHandler
+ .thumb_set SWPMI1_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak RNG_IRQHandler
+ .thumb_set RNG_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+
+ .weak CRS_IRQHandler
+ .thumb_set CRS_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/startup_stm32l432xx.S b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/startup_stm32l432xx.S
new file mode 100644
index 0000000000..a3dd09c0dc
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/startup_stm32l432xx.S
@@ -0,0 +1,533 @@
+;/********************* COPYRIGHT(c) 2016 STMicroelectronics ********************
+;* File Name : startup_stm32l432xx.s
+;* Author : MCD Application Team
+;* Version : V1.1.1
+;* Date : 29-April-2016
+;* Description : STM32L432xx Ultra Low Power Devices vector
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == _iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M4 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI3_IRQHandler ; SPI3
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
+ DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
+ DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD COMP_IRQHandler ; COMP Interrupt
+ DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
+ DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
+ DCD USB_IRQHandler ; USB FS
+ DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
+ DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
+ DCD LPUART1_IRQHandler ; LP UART 1 interrupt
+ DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
+ DCD 0 ; Reserved
+ DCD SWPMI1_IRQHandler ; Serial Wire Interface global interrupt
+ DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD RNG_IRQHandler ; RNG global interrupt
+ DCD FPU_IRQHandler ; FPU interrupt
+ DCD CRS_IRQHandler ; CRS interrupt
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_PVM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_PVM_IRQHandler
+ B PVD_PVM_IRQHandler
+
+ PUBWEAK TAMP_STAMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TAMP_STAMP_IRQHandler
+ B TAMP_STAMP_IRQHandler
+
+ PUBWEAK RTC_WKUP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_WKUP_IRQHandler
+ B RTC_WKUP_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK CAN1_TX_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CAN1_TX_IRQHandler
+ B CAN1_TX_IRQHandler
+
+ PUBWEAK CAN1_RX0_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CAN1_RX0_IRQHandler
+ B CAN1_RX0_IRQHandler
+
+ PUBWEAK CAN1_RX1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CAN1_RX1_IRQHandler
+ B CAN1_RX1_IRQHandler
+
+ PUBWEAK CAN1_SCE_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CAN1_SCE_IRQHandler
+ B CAN1_SCE_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_TIM15_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+ B TIM1_BRK_TIM15_IRQHandler
+
+ PUBWEAK TIM1_UP_TIM16_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+ B TIM1_UP_TIM16_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+ B TIM1_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTC_Alarm_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_Alarm_IRQHandler
+ B RTC_Alarm_IRQHandler
+
+ PUBWEAK SPI3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SPI3_IRQHandler
+ B SPI3_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK DMA2_Channel1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA2_Channel1_IRQHandler
+ B DMA2_Channel1_IRQHandler
+
+ PUBWEAK DMA2_Channel2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA2_Channel2_IRQHandler
+ B DMA2_Channel2_IRQHandler
+
+ PUBWEAK DMA2_Channel3_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA2_Channel3_IRQHandler
+ B DMA2_Channel3_IRQHandler
+
+ PUBWEAK DMA2_Channel4_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA2_Channel4_IRQHandler
+ B DMA2_Channel4_IRQHandler
+
+ PUBWEAK DMA2_Channel5_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA2_Channel5_IRQHandler
+ B DMA2_Channel5_IRQHandler
+
+ PUBWEAK COMP_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+COMP_IRQHandler
+ B COMP_IRQHandler
+
+ PUBWEAK LPTIM1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+LPTIM1_IRQHandler
+ B LPTIM1_IRQHandler
+
+ PUBWEAK LPTIM2_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+LPTIM2_IRQHandler
+ B LPTIM2_IRQHandler
+
+ PUBWEAK USB_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+ B USB_IRQHandler
+
+ PUBWEAK DMA2_Channel6_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA2_Channel6_IRQHandler
+ B DMA2_Channel6_IRQHandler
+
+ PUBWEAK DMA2_Channel7_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+DMA2_Channel7_IRQHandler
+ B DMA2_Channel7_IRQHandler
+
+ PUBWEAK LPUART1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+LPUART1_IRQHandler
+ B LPUART1_IRQHandler
+
+ PUBWEAK QUADSPI_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+QUADSPI_IRQHandler
+ B QUADSPI_IRQHandler
+
+ PUBWEAK I2C3_EV_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C3_EV_IRQHandler
+ B I2C3_EV_IRQHandler
+
+ PUBWEAK I2C3_ER_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+I2C3_ER_IRQHandler
+ B I2C3_ER_IRQHandler
+
+ PUBWEAK SAI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SAI1_IRQHandler
+ B SAI1_IRQHandler
+
+ PUBWEAK SWPMI1_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+SWPMI1_IRQHandler
+ B SWPMI1_IRQHandler
+
+ PUBWEAK TSC_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+ B TSC_IRQHandler
+
+ PUBWEAK RNG_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+RNG_IRQHandler
+ B RNG_IRQHandler
+
+ PUBWEAK FPU_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+FPU_IRQHandler
+ B FPU_IRQHandler
+
+ PUBWEAK CRS_IRQHandler
+ SECTION .text:CODE:NOROOT:REORDER(1)
+CRS_IRQHandler
+ B CRS_IRQHandler
+
+ END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/stm32l432xx.icf b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/stm32l432xx.icf
new file mode 100644
index 0000000000..0392041007
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/stm32l432xx.icf
@@ -0,0 +1,35 @@
+/* [ROM = 256kb = 0x40000] */
+define symbol __intvec_start__ = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__ = 0x0803FFFF;
+
+/* [RAM = 48kb + 16kb = 0xC000] */
+/* Vector table dynamic copy: Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x10000000;
+define symbol __NVIC_end__ = 0x10000187; /* Aligned on 8 bytes (392 = 49 x 8) */
+define symbol __region_SRAM2_start__ = 0x10000188;
+define symbol __region_SRAM2_end__ = 0x10003FFF;
+define symbol __region_SRAM1_start__ = 0x20000000;
+define symbol __region_SRAM1_end__ = 0x2000BFFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region SRAM2_region = mem:[from __region_SRAM2_start__ to __region_SRAM2_end__];
+define region SRAM1_region = mem:[from __region_SRAM1_start__ to __region_SRAM1_end__];
+
+/* Stack 1/8 and Heap 1/4 of RAM */
+define symbol __size_cstack__ = 0x2000;
+define symbol __size_heap__ = 0x4000;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in SRAM1_region { readwrite, block STACKHEAP };
+place in SRAM2_region { };
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis.h
new file mode 100644
index 0000000000..41a1233f3b
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis.h
@@ -0,0 +1,38 @@
+/* mbed Microcontroller Library
+ * A generic CMSIS include header
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_H
+#define MBED_CMSIS_H
+
+#include "stm32l4xx.h"
+#include "cmsis_nvic.h"
+
+#endif
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis_nvic.c b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis_nvic.c
new file mode 100644
index 0000000000..a8a6a487a5
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis_nvic.c
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS (0x10000000) // Vectors positioned at start of SRAM2
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+ uint32_t *vectors = (uint32_t *)SCB->VTOR;
+ uint32_t i;
+
+ // Copy and switch to dynamic vectors if the first time called
+ if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+ uint32_t *old_vectors = vectors;
+ vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+ for (i=0; iVTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis_nvic.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis_nvic.h
new file mode 100644
index 0000000000..2af8d33e21
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/cmsis_nvic.h
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 82 vectors = 328 bytes from 0x40 to 0x187
+// Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
+#define NVIC_NUM_VECTORS 98
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/hal_tick.c b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/hal_tick.c
new file mode 100644
index 0000000000..1b72c5a4c3
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/hal_tick.c
@@ -0,0 +1,126 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#include "hal_tick.h"
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+ // Channel 1 for mbed timeout
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
+ if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC1) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+ us_ticker_irq_handler();
+ }
+ }
+
+ // Channel 2 for HAL tick
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC2) == SET) {
+ if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC2) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+ uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+ if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+ // Increment HAL variable
+ HAL_IncTick();
+ // Prepare next interrupt
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+ PreviousVal = val;
+#if 0 // For DEBUG only
+ HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
+#endif
+ }
+ }
+ }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Reset timer
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFFFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ HAL_TIM_OC_Init(&TimMasterHandle);
+
+ NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_IRQ);
+
+ // Channel 1 for mbed timeout
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+ // Channel 2 for HAL tick
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+ PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if 0 // For DEBUG only
+ __GPIOB_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct;
+ GPIO_InitStruct.Pin = GPIO_PIN_6;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+#endif
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/hal_tick.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/hal_tick.h
new file mode 100644
index 0000000000..ef6b63b4ee
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/hal_tick.h
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32l4xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM2
+#define TIM_MST_IRQ TIM2_IRQn
+#define TIM_MST_RCC __TIM2_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM2_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM2_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/stm32l432xx.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/stm32l432xx.h
new file mode 100644
index 0000000000..1977d30f94
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/stm32l432xx.h
@@ -0,0 +1,14863 @@
+/**
+ ******************************************************************************
+ * @file stm32l432xx.h
+ * @author MCD Application Team
+ * @version V1.1.1
+ * @date 29-April-2016
+ * @brief CMSIS STM32L432xx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral�s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32l432xx
+ * @{
+ */
+
+#ifndef __STM32L432xx_H
+#define __STM32L432xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Cortex-M4 revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32L4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32L4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32L4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Cortex-M4 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M4 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_PVM_IRQn = 1, /*!< PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection Interrupts */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break interrupt and TIM15 global interrupt */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update Interrupt and TIM16 global interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */
+ COMP_IRQn = 64, /*!< COMP1 and COMP2 Interrupts */
+ LPTIM1_IRQn = 65, /*!< LP TIM1 interrupt */
+ LPTIM2_IRQn = 66, /*!< LP TIM2 interrupt */
+ USB_IRQn = 67, /*!< USB event Interrupt */
+ DMA2_Channel6_IRQn = 68, /*!< DMA2 Channel 6 global interrupt */
+ DMA2_Channel7_IRQn = 69, /*!< DMA2 Channel 7 global interrupt */
+ LPUART1_IRQn = 70, /*!< LP UART1 interrupt */
+ QUADSPI_IRQn = 71, /*!< Quad SPI global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ SAI1_IRQn = 74, /*!< Serial Audio Interface 1 global interrupt */
+ SWPMI1_IRQn = 76, /*!< Serial Wire Interface 1 global interrupt */
+ TSC_IRQn = 77, /*!< Touch Sense Controller global interrupt */
+ RNG_IRQn = 80, /*!< RNG global interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ CRS_IRQn = 82 /*!< CRS global interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32l4xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */
+ __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */
+ __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, 0x1C */
+ __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */
+ __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */
+ __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x2C */
+ __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */
+ __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */
+ uint32_t RESERVED3; /*!< Reserved, 0x44 */
+ uint32_t RESERVED4; /*!< Reserved, 0x48 */
+ __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */
+ uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */
+ __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */
+ __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */
+ __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */
+ __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */
+ uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */
+ __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */
+ __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */
+ __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */
+ __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */
+ uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */
+ __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */
+ __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */
+ uint32_t RESERVED8; /*!< Reserved, 0x0A8 */
+ uint32_t RESERVED9; /*!< Reserved, 0x0AC */
+ __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */
+
+} ADC_TypeDef;
+
+typedef struct
+{
+ uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+} CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+ __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */
+ __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */
+ __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */
+ __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */
+ __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */
+ __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */
+} DAC_TypeDef;
+
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZR1; /*!< Debug MCU APB1 freeze register 1, Address offset: 0x08 */
+ __IO uint32_t APB1FZR2; /*!< Debug MCU APB1 freeze register 2, Address offset: 0x0C */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x10 */
+} DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSELR; /*!< DMA channel selection register */
+} DMA_Request_TypeDef;
+
+/* Legacy define */
+#define DMA_request_TypeDef DMA_Request_TypeDef
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x00 */
+ __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x04 */
+ __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x08 */
+ __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x0C */
+ __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x10 */
+ __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x20 */
+ __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x24 */
+ __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x28 */
+ __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x2C */
+ __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x30 */
+ __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x34 */
+} EXTI_TypeDef;
+
+
+/**
+ * @brief Firewall
+ */
+
+typedef struct
+{
+ __IO uint32_t CSSA; /*!< Code Segment Start Address register, Address offset: 0x00 */
+ __IO uint32_t CSL; /*!< Code Segment Length register, Address offset: 0x04 */
+ __IO uint32_t NVDSSA; /*!< NON volatile data Segment Start Address register, Address offset: 0x08 */
+ __IO uint32_t NVDSL; /*!< NON volatile data Segment Length register, Address offset: 0x0C */
+ __IO uint32_t VDSSA ; /*!< Volatile data Segment Start Address register, Address offset: 0x10 */
+ __IO uint32_t VDSL ; /*!< Volatile data Segment Length register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */
+ __IO uint32_t CR ; /*!< Configuration register, Address offset: 0x20 */
+} FIREWALL_TypeDef;
+
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t PDKEYR; /*!< FLASH power down key register, Address offset: 0x04 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x08 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x10 */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x14 */
+ __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */
+ __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x1C */
+ __IO uint32_t OPTR; /*!< FLASH option register, Address offset: 0x20 */
+ __IO uint32_t PCROP1SR; /*!< FLASH bank1 PCROP start address register, Address offset: 0x24 */
+ __IO uint32_t PCROP1ER; /*!< FLASH bank1 PCROP end address register, Address offset: 0x28 */
+ __IO uint32_t WRP1AR; /*!< FLASH bank1 WRP area A address register, Address offset: 0x2C */
+ __IO uint32_t WRP1BR; /*!< FLASH bank1 WRP area B address register, Address offset: 0x30 */
+} FLASH_TypeDef;
+
+
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */
+
+} GPIO_TypeDef;
+
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+} IWDG_TypeDef;
+
+/**
+ * @brief LPTIMER
+ */
+typedef struct
+{
+ __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */
+ __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */
+ __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */
+ __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */
+ __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */
+ __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */
+ __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */
+} LPTIM_TypeDef;
+
+/**
+ * @brief Operational Amplifier (OPAMP)
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */
+ __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */
+ __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */
+} OPAMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< OPAMP control/status register, used for bits common to several OPAMP instances, Address offset: 0x00 */
+} OPAMP_Common_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< PWR power control register 3, Address offset: 0x08 */
+ __IO uint32_t CR4; /*!< PWR power control register 4, Address offset: 0x0C */
+ __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x10 */
+ __IO uint32_t SR2; /*!< PWR power status register 2, Address offset: 0x14 */
+ __IO uint32_t SCR; /*!< PWR power status reset register, Address offset: 0x18 */
+ uint32_t RESERVED; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t PUCRA; /*!< Pull_up control register of portA, Address offset: 0x20 */
+ __IO uint32_t PDCRA; /*!< Pull_Down control register of portA, Address offset: 0x24 */
+ __IO uint32_t PUCRB; /*!< Pull_up control register of portB, Address offset: 0x28 */
+ __IO uint32_t PDCRB; /*!< Pull_Down control register of portB, Address offset: 0x2C */
+ __IO uint32_t PUCRC; /*!< Pull_up control register of portC, Address offset: 0x30 */
+ __IO uint32_t PDCRC; /*!< Pull_Down control register of portC, Address offset: 0x34 */
+ __IO uint32_t PUCRD; /*!< Pull_up control register of portD, Address offset: 0x38 */
+ __IO uint32_t PDCRD; /*!< Pull_Down control register of portD, Address offset: 0x3C */
+ __IO uint32_t PUCRE; /*!< Pull_up control register of portE, Address offset: 0x40 */
+ __IO uint32_t PDCRE; /*!< Pull_Down control register of portE, Address offset: 0x44 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x4C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x50 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x54 */
+ __IO uint32_t PUCRH; /*!< Pull_up control register of portH, Address offset: 0x58 */
+ __IO uint32_t PDCRH; /*!< Pull_Down control register of portH, Address offset: 0x5C */
+} PWR_TypeDef;
+
+
+/**
+ * @brief QUAD Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */
+ __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */
+ __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */
+ __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */
+ __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */
+ __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */
+ __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */
+ __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */
+ __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */
+ __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */
+ __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */
+} QUADSPI_TypeDef;
+
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t ICSCR; /*!< RCC internal clock sources calibration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t PLLCFGR; /*!< RCC system PLL configuration register, Address offset: 0x0C */
+ __IO uint32_t PLLSAI1CFGR; /*!< RCC PLL SAI1 configuration register, Address offset: 0x10 */
+ uint32_t RESERVED; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x18 */
+ __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x1C */
+ __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x20 */
+ uint32_t RESERVED0; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x30 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */
+ __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */
+ __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x44 */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x50 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x54 */
+ __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */
+ __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x64 */
+ __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */
+ __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */
+ __IO uint32_t AHB3SMENR; /*!< RCC AHB3 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */
+ uint32_t RESERVED5; /*!< Reserved, Address offset: 0x74 */
+ __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */
+ __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */
+ __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */
+ uint32_t RESERVED6; /*!< Reserved, Address offset: 0x84 */
+ __IO uint32_t CCIPR; /*!< RCC peripherals independent clock configuration register, Address offset: 0x88 */
+ __IO uint32_t RESERVED7; /*!< Reserved, Address offset: 0x8C */
+ __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x90 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x94 */
+ __IO uint32_t CRRCR; /*!< RCC clock recovery RC register, Address offset: 0x98 */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t reserved; /*!< Reserved */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+ __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */
+ __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */
+ __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */
+ __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */
+ __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */
+ __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */
+ __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */
+ __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */
+ __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */
+ __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */
+ __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */
+ __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */
+} RTC_TypeDef;
+
+
+/**
+ * @brief Serial Audio Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */
+} SAI_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */
+ __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */
+ __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */
+ __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */
+ __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */
+ __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */
+} SAI_Block_TypeDef;
+
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+} SPI_TypeDef;
+
+
+/**
+ * @brief Single Wire Protocol Master Interface SPWMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< SWPMI Configuration/Control register, Address offset: 0x00 */
+ __IO uint32_t BRR; /*!< SWPMI bitrate register, Address offset: 0x04 */
+ uint32_t RESERVED1; /*!< Reserved, 0x08 */
+ __IO uint32_t ISR; /*!< SWPMI Interrupt and Status register, Address offset: 0x0C */
+ __IO uint32_t ICR; /*!< SWPMI Interrupt Flag Clear register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< SWPMI Interrupt Enable register, Address offset: 0x14 */
+ __IO uint32_t RFL; /*!< SWPMI Receive Frame Length register, Address offset: 0x18 */
+ __IO uint32_t TDR; /*!< SWPMI Transmit data register, Address offset: 0x1C */
+ __IO uint32_t RDR; /*!< SWPMI Receive data register, Address offset: 0x20 */
+ __IO uint32_t OR; /*!< SWPMI Option register, Address offset: 0x24 */
+} SWPMI_TypeDef;
+
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */
+ __IO uint32_t SWPR; /*!< SYSCFG SRAM2 write protection register, Address offset: 0x20 */
+ __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */
+} SYSCFG_TypeDef;
+
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR1; /*!< TIM option register 1, Address offset: 0x50 */
+ __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */
+ __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */
+ __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */
+ __IO uint32_t OR2; /*!< TIM option register 2, Address offset: 0x60 */
+ __IO uint32_t OR3; /*!< TIM option register 3, Address offset: 0x64 */
+} TIM_TypeDef;
+
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[7]; /*!< TSC I/O group x counter register, Address offset: 0x34-4C */
+} TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ uint16_t RESERVED2; /*!< Reserved, 0x12 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint16_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ uint16_t RESERVED3; /*!< Reserved, 0x1A */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED4; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED5; /*!< Reserved, 0x2A */
+} USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+} USB_TypeDef;
+
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+#define FLASH_BASE ((uint32_t)0x08000000U) /*!< FLASH(up to 1 MB) base address */
+#define SRAM1_BASE ((uint32_t)0x20000000U) /*!< SRAM1(up to 48 KB) base address */
+#define PERIPH_BASE ((uint32_t)0x40000000U) /*!< Peripheral base address */
+#define SRAM2_BASE ((uint32_t)0x10000000U) /*!< SRAM2(16 KB) base address */
+#define QSPI_BASE ((uint32_t)0x90000000U) /*!< QSPI memories accessible over AHB base address */
+#define QSPI_R_BASE ((uint32_t)0xA0001000U) /*!< QUADSPI control registers base address */
+#define SRAM1_BB_BASE ((uint32_t)0x22000000U) /*!< SRAM1(96 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000U) /*!< Peripheral base address in the bit-band region */
+#define SRAM2_BB_BASE ((uint32_t)0x12000000U) /*!< SRAM2(32 KB) base address in the bit-band region */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+#define SRAM1_SIZE_MAX ((uint32_t)0x0000C000U) /*!< maximum SRAM1 size (up to 48 KBytes) */
+#define SRAM2_SIZE ((uint32_t)0x00004000U) /*!< SRAM2 size (16 KBytes) */
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000U)
+
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000U)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400U)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800U)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400U)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U)
+#define CRS_BASE (APB1PERIPH_BASE + 0x6000U)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400U)
+#define USB_BASE (APB1PERIPH_BASE + 0x6800U) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APB1PERIPH_BASE + 0x6C00U) /*!< USB_IP Packet Memory Area base address */
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000U)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400U)
+#define DAC1_BASE (APB1PERIPH_BASE + 0x7400U)
+#define OPAMP_BASE (APB1PERIPH_BASE + 0x7800U)
+#define OPAMP1_BASE (APB1PERIPH_BASE + 0x7800U)
+#define LPTIM1_BASE (APB1PERIPH_BASE + 0x7C00U)
+#define LPUART1_BASE (APB1PERIPH_BASE + 0x8000U)
+#define SWPMI1_BASE (APB1PERIPH_BASE + 0x8800U)
+#define LPTIM2_BASE (APB1PERIPH_BASE + 0x9400U)
+
+
+/*!< APB2 peripherals */
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x0000U)
+#define COMP1_BASE (APB2PERIPH_BASE + 0x0200U)
+#define COMP2_BASE (APB2PERIPH_BASE + 0x0204U)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x0400U)
+#define FIREWALL_BASE (APB2PERIPH_BASE + 0x1C00U)
+#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00U)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U)
+#define USART1_BASE (APB2PERIPH_BASE + 0x3800U)
+#define TIM15_BASE (APB2PERIPH_BASE + 0x4000U)
+#define TIM16_BASE (APB2PERIPH_BASE + 0x4400U)
+#define SAI1_BASE (APB2PERIPH_BASE + 0x5400U)
+#define SAI1_Block_A_BASE (SAI1_BASE + 0x004)
+#define SAI1_Block_B_BASE (SAI1_BASE + 0x024)
+
+/*!< AHB1 peripherals */
+#define DMA1_BASE (AHB1PERIPH_BASE)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x0400U)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x1000U)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x2000U)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U)
+#define TSC_BASE (AHB1PERIPH_BASE + 0x4000U)
+
+
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x0008U)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x001CU)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x0030U)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x0044U)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x0058U)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x006CU)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x0080U)
+#define DMA1_CSELR_BASE (DMA1_BASE + 0x00A8U)
+
+
+#define DMA2_Channel1_BASE (DMA2_BASE + 0x0008U)
+#define DMA2_Channel2_BASE (DMA2_BASE + 0x001CU)
+#define DMA2_Channel3_BASE (DMA2_BASE + 0x0030U)
+#define DMA2_Channel4_BASE (DMA2_BASE + 0x0044U)
+#define DMA2_Channel5_BASE (DMA2_BASE + 0x0058U)
+#define DMA2_Channel6_BASE (DMA2_BASE + 0x006CU)
+#define DMA2_Channel7_BASE (DMA2_BASE + 0x0080U)
+#define DMA2_CSELR_BASE (DMA2_BASE + 0x00A8U)
+
+
+/*!< AHB2 peripherals */
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000U)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400U)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800U)
+#define GPIOH_BASE (AHB2PERIPH_BASE + 0x1C00U)
+
+
+#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000U)
+#define ADC1_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300U)
+
+
+#define RNG_BASE (AHB2PERIPH_BASE + 0x08060800U)
+
+
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t)0xE0042000U)
+
+
+#define PACKAGE_BASE ((uint32_t)0x1FFF7500U) /*!< Package data register base address */
+#define UID_BASE ((uint32_t)0x1FFF7590U) /*!< Unique device ID register base address */
+#define FLASHSIZE_BASE ((uint32_t)0x1FFF75E0U) /*!< Flash size data register base address */
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+//#define CAN ((CAN_TypeDef *) CAN1_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC1_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC1_BASE)
+#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE)
+#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE)
+#define OPAMP1_COMMON ((OPAMP_Common_TypeDef *) OPAMP1_BASE)
+#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE)
+#define LPUART1 ((USART_TypeDef *) LPUART1_BASE)
+#define SWPMI1 ((SWPMI_TypeDef *) SWPMI1_BASE)
+#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE)
+
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP1_BASE)
+#define COMP2 ((COMP_TypeDef *) COMP2_BASE)
+#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define FIREWALL ((FIREWALL_TypeDef *) FIREWALL_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define SAI1 ((SAI_TypeDef *) SAI1_BASE)
+#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE)
+#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+
+
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA1_CSELR ((DMA_request_TypeDef *) DMA1_CSELR_BASE)
+
+
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define DMA2_Channel6 ((DMA_Channel_TypeDef *) DMA2_Channel6_BASE)
+#define DMA2_Channel7 ((DMA_Channel_TypeDef *) DMA2_Channel7_BASE)
+#define DMA2_CSELR ((DMA_request_TypeDef *) DMA2_CSELR_BASE)
+
+
+
+#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+/** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+
+/*
+ * @brief Specific device feature definitions (not present on all devices in the STM32L4 serie)
+ */
+/* Note: No specific macro feature on this device */
+
+/******************** Bit definition for ADC_ISR register *******************/
+#define ADC_ISR_ADRDY_Pos (0U)
+#define ADC_ISR_ADRDY_Msk (0x1U << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */
+#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */
+#define ADC_ISR_EOSMP_Pos (1U)
+#define ADC_ISR_EOSMP_Msk (0x1U << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */
+#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */
+#define ADC_ISR_EOC_Pos (2U)
+#define ADC_ISR_EOC_Msk (0x1U << ADC_ISR_EOC_Pos) /*!< 0x00000004 */
+#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */
+#define ADC_ISR_EOS_Pos (3U)
+#define ADC_ISR_EOS_Msk (0x1U << ADC_ISR_EOS_Pos) /*!< 0x00000008 */
+#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */
+#define ADC_ISR_OVR_Pos (4U)
+#define ADC_ISR_OVR_Msk (0x1U << ADC_ISR_OVR_Pos) /*!< 0x00000010 */
+#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */
+#define ADC_ISR_JEOC_Pos (5U)
+#define ADC_ISR_JEOC_Msk (0x1U << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */
+#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */
+#define ADC_ISR_JEOS_Pos (6U)
+#define ADC_ISR_JEOS_Msk (0x1U << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */
+#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */
+#define ADC_ISR_AWD1_Pos (7U)
+#define ADC_ISR_AWD1_Msk (0x1U << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */
+#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */
+#define ADC_ISR_AWD2_Pos (8U)
+#define ADC_ISR_AWD2_Msk (0x1U << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */
+#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */
+#define ADC_ISR_AWD3_Pos (9U)
+#define ADC_ISR_AWD3_Msk (0x1U << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */
+#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */
+#define ADC_ISR_JQOVF_Pos (10U)
+#define ADC_ISR_JQOVF_Msk (0x1U << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */
+#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */
+
+/******************** Bit definition for ADC_IER register *******************/
+#define ADC_IER_ADRDYIE_Pos (0U)
+#define ADC_IER_ADRDYIE_Msk (0x1U << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */
+#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */
+#define ADC_IER_EOSMPIE_Pos (1U)
+#define ADC_IER_EOSMPIE_Msk (0x1U << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */
+#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */
+#define ADC_IER_EOCIE_Pos (2U)
+#define ADC_IER_EOCIE_Msk (0x1U << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */
+#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */
+#define ADC_IER_EOSIE_Pos (3U)
+#define ADC_IER_EOSIE_Msk (0x1U << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */
+#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */
+#define ADC_IER_OVRIE_Pos (4U)
+#define ADC_IER_OVRIE_Msk (0x1U << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */
+#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */
+#define ADC_IER_JEOCIE_Pos (5U)
+#define ADC_IER_JEOCIE_Msk (0x1U << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */
+#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */
+#define ADC_IER_JEOSIE_Pos (6U)
+#define ADC_IER_JEOSIE_Msk (0x1U << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */
+#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */
+#define ADC_IER_AWD1IE_Pos (7U)
+#define ADC_IER_AWD1IE_Msk (0x1U << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */
+#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */
+#define ADC_IER_AWD2IE_Pos (8U)
+#define ADC_IER_AWD2IE_Msk (0x1U << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */
+#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */
+#define ADC_IER_AWD3IE_Pos (9U)
+#define ADC_IER_AWD3IE_Msk (0x1U << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */
+#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */
+#define ADC_IER_JQOVFIE_Pos (10U)
+#define ADC_IER_JQOVFIE_Msk (0x1U << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */
+#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */
+
+/* Legacy defines */
+#define ADC_IER_ADRDY (ADC_IER_ADRDYIE)
+#define ADC_IER_EOSMP (ADC_IER_EOSMPIE)
+#define ADC_IER_EOC (ADC_IER_EOCIE)
+#define ADC_IER_EOS (ADC_IER_EOSIE)
+#define ADC_IER_OVR (ADC_IER_OVRIE)
+#define ADC_IER_JEOC (ADC_IER_JEOCIE)
+#define ADC_IER_JEOS (ADC_IER_JEOSIE)
+#define ADC_IER_AWD1 (ADC_IER_AWD1IE)
+#define ADC_IER_AWD2 (ADC_IER_AWD2IE)
+#define ADC_IER_AWD3 (ADC_IER_AWD3IE)
+#define ADC_IER_JQOVF (ADC_IER_JQOVFIE)
+
+/******************** Bit definition for ADC_CR register ********************/
+#define ADC_CR_ADEN_Pos (0U)
+#define ADC_CR_ADEN_Msk (0x1U << ADC_CR_ADEN_Pos) /*!< 0x00000001 */
+#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */
+#define ADC_CR_ADDIS_Pos (1U)
+#define ADC_CR_ADDIS_Msk (0x1U << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */
+#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */
+#define ADC_CR_ADSTART_Pos (2U)
+#define ADC_CR_ADSTART_Msk (0x1U << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */
+#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */
+#define ADC_CR_JADSTART_Pos (3U)
+#define ADC_CR_JADSTART_Msk (0x1U << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */
+#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */
+#define ADC_CR_ADSTP_Pos (4U)
+#define ADC_CR_ADSTP_Msk (0x1U << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */
+#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */
+#define ADC_CR_JADSTP_Pos (5U)
+#define ADC_CR_JADSTP_Msk (0x1U << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */
+#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */
+#define ADC_CR_ADVREGEN_Pos (28U)
+#define ADC_CR_ADVREGEN_Msk (0x1U << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */
+#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */
+#define ADC_CR_DEEPPWD_Pos (29U)
+#define ADC_CR_DEEPPWD_Msk (0x1U << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */
+#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */
+#define ADC_CR_ADCALDIF_Pos (30U)
+#define ADC_CR_ADCALDIF_Msk (0x1U << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */
+#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */
+#define ADC_CR_ADCAL_Pos (31U)
+#define ADC_CR_ADCAL_Msk (0x1U << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */
+#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */
+
+/******************** Bit definition for ADC_CFGR register ******************/
+#define ADC_CFGR_DMAEN_Pos (0U)
+#define ADC_CFGR_DMAEN_Msk (0x1U << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */
+#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */
+#define ADC_CFGR_DMACFG_Pos (1U)
+#define ADC_CFGR_DMACFG_Msk (0x1U << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */
+#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */
+
+#define ADC_CFGR_RES_Pos (3U)
+#define ADC_CFGR_RES_Msk (0x3U << ADC_CFGR_RES_Pos) /*!< 0x00000018 */
+#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */
+#define ADC_CFGR_RES_0 (0x1U << ADC_CFGR_RES_Pos) /*!< 0x00000008 */
+#define ADC_CFGR_RES_1 (0x2U << ADC_CFGR_RES_Pos) /*!< 0x00000010 */
+
+#define ADC_CFGR_ALIGN_Pos (5U)
+#define ADC_CFGR_ALIGN_Msk (0x1U << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */
+#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignement */
+
+#define ADC_CFGR_EXTSEL_Pos (6U)
+#define ADC_CFGR_EXTSEL_Msk (0xFU << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */
+#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */
+#define ADC_CFGR_EXTSEL_0 (0x1U << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */
+#define ADC_CFGR_EXTSEL_1 (0x2U << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */
+#define ADC_CFGR_EXTSEL_2 (0x4U << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */
+#define ADC_CFGR_EXTSEL_3 (0x8U << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */
+
+#define ADC_CFGR_EXTEN_Pos (10U)
+#define ADC_CFGR_EXTEN_Msk (0x3U << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */
+#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */
+#define ADC_CFGR_EXTEN_0 (0x1U << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */
+#define ADC_CFGR_EXTEN_1 (0x2U << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */
+
+#define ADC_CFGR_OVRMOD_Pos (12U)
+#define ADC_CFGR_OVRMOD_Msk (0x1U << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */
+#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */
+#define ADC_CFGR_CONT_Pos (13U)
+#define ADC_CFGR_CONT_Msk (0x1U << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */
+#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */
+#define ADC_CFGR_AUTDLY_Pos (14U)
+#define ADC_CFGR_AUTDLY_Msk (0x1U << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */
+#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */
+
+#define ADC_CFGR_DISCEN_Pos (16U)
+#define ADC_CFGR_DISCEN_Msk (0x1U << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */
+#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */
+
+#define ADC_CFGR_DISCNUM_Pos (17U)
+#define ADC_CFGR_DISCNUM_Msk (0x7U << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */
+#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */
+#define ADC_CFGR_DISCNUM_0 (0x1U << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */
+#define ADC_CFGR_DISCNUM_1 (0x2U << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */
+#define ADC_CFGR_DISCNUM_2 (0x4U << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */
+
+#define ADC_CFGR_JDISCEN_Pos (20U)
+#define ADC_CFGR_JDISCEN_Msk (0x1U << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */
+#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */
+#define ADC_CFGR_JQM_Pos (21U)
+#define ADC_CFGR_JQM_Msk (0x1U << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */
+#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */
+#define ADC_CFGR_AWD1SGL_Pos (22U)
+#define ADC_CFGR_AWD1SGL_Msk (0x1U << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */
+#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */
+#define ADC_CFGR_AWD1EN_Pos (23U)
+#define ADC_CFGR_AWD1EN_Msk (0x1U << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */
+#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */
+#define ADC_CFGR_JAWD1EN_Pos (24U)
+#define ADC_CFGR_JAWD1EN_Msk (0x1U << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */
+#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */
+#define ADC_CFGR_JAUTO_Pos (25U)
+#define ADC_CFGR_JAUTO_Msk (0x1U << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */
+#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */
+
+#define ADC_CFGR_AWD1CH_Pos (26U)
+#define ADC_CFGR_AWD1CH_Msk (0x1FU << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */
+#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */
+#define ADC_CFGR_AWD1CH_0 (0x01U << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */
+#define ADC_CFGR_AWD1CH_1 (0x02U << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */
+#define ADC_CFGR_AWD1CH_2 (0x04U << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */
+#define ADC_CFGR_AWD1CH_3 (0x08U << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */
+#define ADC_CFGR_AWD1CH_4 (0x10U << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */
+
+#define ADC_CFGR_JQDIS_Pos (31U)
+#define ADC_CFGR_JQDIS_Msk (0x1U << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */
+#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */
+
+/******************** Bit definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_ROVSE_Pos (0U)
+#define ADC_CFGR2_ROVSE_Msk (0x1U << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */
+#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */
+#define ADC_CFGR2_JOVSE_Pos (1U)
+#define ADC_CFGR2_JOVSE_Msk (0x1U << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */
+#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */
+
+#define ADC_CFGR2_OVSR_Pos (2U)
+#define ADC_CFGR2_OVSR_Msk (0x7U << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */
+#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */
+#define ADC_CFGR2_OVSR_0 (0x1U << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */
+#define ADC_CFGR2_OVSR_1 (0x2U << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */
+#define ADC_CFGR2_OVSR_2 (0x4U << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */
+
+#define ADC_CFGR2_OVSS_Pos (5U)
+#define ADC_CFGR2_OVSS_Msk (0xFU << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */
+#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */
+#define ADC_CFGR2_OVSS_0 (0x1U << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */
+#define ADC_CFGR2_OVSS_1 (0x2U << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */
+#define ADC_CFGR2_OVSS_2 (0x4U << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */
+#define ADC_CFGR2_OVSS_3 (0x8U << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */
+
+#define ADC_CFGR2_TROVS_Pos (9U)
+#define ADC_CFGR2_TROVS_Msk (0x1U << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */
+#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */
+#define ADC_CFGR2_ROVSM_Pos (10U)
+#define ADC_CFGR2_ROVSM_Msk (0x1U << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */
+#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */
+
+/******************** Bit definition for ADC_SMPR1 register *****************/
+#define ADC_SMPR1_SMP0_Pos (0U)
+#define ADC_SMPR1_SMP0_Msk (0x7U << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */
+#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */
+#define ADC_SMPR1_SMP0_0 (0x1U << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */
+#define ADC_SMPR1_SMP0_1 (0x2U << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */
+#define ADC_SMPR1_SMP0_2 (0x4U << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */
+
+#define ADC_SMPR1_SMP1_Pos (3U)
+#define ADC_SMPR1_SMP1_Msk (0x7U << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */
+#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */
+#define ADC_SMPR1_SMP1_0 (0x1U << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */
+#define ADC_SMPR1_SMP1_1 (0x2U << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */
+#define ADC_SMPR1_SMP1_2 (0x4U << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */
+
+#define ADC_SMPR1_SMP2_Pos (6U)
+#define ADC_SMPR1_SMP2_Msk (0x7U << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */
+#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */
+#define ADC_SMPR1_SMP2_0 (0x1U << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */
+#define ADC_SMPR1_SMP2_1 (0x2U << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */
+#define ADC_SMPR1_SMP2_2 (0x4U << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */
+
+#define ADC_SMPR1_SMP3_Pos (9U)
+#define ADC_SMPR1_SMP3_Msk (0x7U << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */
+#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */
+#define ADC_SMPR1_SMP3_0 (0x1U << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */
+#define ADC_SMPR1_SMP3_1 (0x2U << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */
+#define ADC_SMPR1_SMP3_2 (0x4U << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */
+
+#define ADC_SMPR1_SMP4_Pos (12U)
+#define ADC_SMPR1_SMP4_Msk (0x7U << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */
+#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */
+#define ADC_SMPR1_SMP4_0 (0x1U << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */
+#define ADC_SMPR1_SMP4_1 (0x2U << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */
+#define ADC_SMPR1_SMP4_2 (0x4U << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */
+
+#define ADC_SMPR1_SMP5_Pos (15U)
+#define ADC_SMPR1_SMP5_Msk (0x7U << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */
+#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */
+#define ADC_SMPR1_SMP5_0 (0x1U << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */
+#define ADC_SMPR1_SMP5_1 (0x2U << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */
+#define ADC_SMPR1_SMP5_2 (0x4U << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */
+
+#define ADC_SMPR1_SMP6_Pos (18U)
+#define ADC_SMPR1_SMP6_Msk (0x7U << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */
+#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */
+#define ADC_SMPR1_SMP6_0 (0x1U << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */
+#define ADC_SMPR1_SMP6_1 (0x2U << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */
+#define ADC_SMPR1_SMP6_2 (0x4U << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */
+
+#define ADC_SMPR1_SMP7_Pos (21U)
+#define ADC_SMPR1_SMP7_Msk (0x7U << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */
+#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */
+#define ADC_SMPR1_SMP7_0 (0x1U << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */
+#define ADC_SMPR1_SMP7_1 (0x2U << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */
+#define ADC_SMPR1_SMP7_2 (0x4U << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */
+
+#define ADC_SMPR1_SMP8_Pos (24U)
+#define ADC_SMPR1_SMP8_Msk (0x7U << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */
+#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */
+#define ADC_SMPR1_SMP8_0 (0x1U << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */
+#define ADC_SMPR1_SMP8_1 (0x2U << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */
+#define ADC_SMPR1_SMP8_2 (0x4U << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */
+
+#define ADC_SMPR1_SMP9_Pos (27U)
+#define ADC_SMPR1_SMP9_Msk (0x7U << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */
+#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */
+#define ADC_SMPR1_SMP9_0 (0x1U << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */
+#define ADC_SMPR1_SMP9_1 (0x2U << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */
+#define ADC_SMPR1_SMP9_2 (0x4U << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */
+
+/******************** Bit definition for ADC_SMPR2 register *****************/
+#define ADC_SMPR2_SMP10_Pos (0U)
+#define ADC_SMPR2_SMP10_Msk (0x7U << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */
+#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */
+#define ADC_SMPR2_SMP10_0 (0x1U << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */
+#define ADC_SMPR2_SMP10_1 (0x2U << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */
+#define ADC_SMPR2_SMP10_2 (0x4U << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */
+
+#define ADC_SMPR2_SMP11_Pos (3U)
+#define ADC_SMPR2_SMP11_Msk (0x7U << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */
+#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */
+#define ADC_SMPR2_SMP11_0 (0x1U << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */
+#define ADC_SMPR2_SMP11_1 (0x2U << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */
+#define ADC_SMPR2_SMP11_2 (0x4U << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */
+
+#define ADC_SMPR2_SMP12_Pos (6U)
+#define ADC_SMPR2_SMP12_Msk (0x7U << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */
+#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */
+#define ADC_SMPR2_SMP12_0 (0x1U << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */
+#define ADC_SMPR2_SMP12_1 (0x2U << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */
+#define ADC_SMPR2_SMP12_2 (0x4U << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */
+
+#define ADC_SMPR2_SMP13_Pos (9U)
+#define ADC_SMPR2_SMP13_Msk (0x7U << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */
+#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */
+#define ADC_SMPR2_SMP13_0 (0x1U << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */
+#define ADC_SMPR2_SMP13_1 (0x2U << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */
+#define ADC_SMPR2_SMP13_2 (0x4U << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */
+
+#define ADC_SMPR2_SMP14_Pos (12U)
+#define ADC_SMPR2_SMP14_Msk (0x7U << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */
+#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */
+#define ADC_SMPR2_SMP14_0 (0x1U << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */
+#define ADC_SMPR2_SMP14_1 (0x2U << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */
+#define ADC_SMPR2_SMP14_2 (0x4U << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */
+
+#define ADC_SMPR2_SMP15_Pos (15U)
+#define ADC_SMPR2_SMP15_Msk (0x7U << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */
+#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */
+#define ADC_SMPR2_SMP15_0 (0x1U << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */
+#define ADC_SMPR2_SMP15_1 (0x2U << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */
+#define ADC_SMPR2_SMP15_2 (0x4U << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */
+
+#define ADC_SMPR2_SMP16_Pos (18U)
+#define ADC_SMPR2_SMP16_Msk (0x7U << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */
+#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */
+#define ADC_SMPR2_SMP16_0 (0x1U << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */
+#define ADC_SMPR2_SMP16_1 (0x2U << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */
+#define ADC_SMPR2_SMP16_2 (0x4U << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */
+
+#define ADC_SMPR2_SMP17_Pos (21U)
+#define ADC_SMPR2_SMP17_Msk (0x7U << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */
+#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */
+#define ADC_SMPR2_SMP17_0 (0x1U << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */
+#define ADC_SMPR2_SMP17_1 (0x2U << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */
+#define ADC_SMPR2_SMP17_2 (0x4U << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */
+
+#define ADC_SMPR2_SMP18_Pos (24U)
+#define ADC_SMPR2_SMP18_Msk (0x7U << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */
+#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */
+#define ADC_SMPR2_SMP18_0 (0x1U << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */
+#define ADC_SMPR2_SMP18_1 (0x2U << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */
+#define ADC_SMPR2_SMP18_2 (0x4U << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */
+
+/******************** Bit definition for ADC_TR1 register *******************/
+#define ADC_TR1_LT1_Pos (0U)
+#define ADC_TR1_LT1_Msk (0xFFFU << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */
+#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */
+#define ADC_TR1_LT1_0 (0x001U << ADC_TR1_LT1_Pos) /*!< 0x00000001 */
+#define ADC_TR1_LT1_1 (0x002U << ADC_TR1_LT1_Pos) /*!< 0x00000002 */
+#define ADC_TR1_LT1_2 (0x004U << ADC_TR1_LT1_Pos) /*!< 0x00000004 */
+#define ADC_TR1_LT1_3 (0x008U << ADC_TR1_LT1_Pos) /*!< 0x00000008 */
+#define ADC_TR1_LT1_4 (0x010U << ADC_TR1_LT1_Pos) /*!< 0x00000010 */
+#define ADC_TR1_LT1_5 (0x020U << ADC_TR1_LT1_Pos) /*!< 0x00000020 */
+#define ADC_TR1_LT1_6 (0x040U << ADC_TR1_LT1_Pos) /*!< 0x00000040 */
+#define ADC_TR1_LT1_7 (0x080U << ADC_TR1_LT1_Pos) /*!< 0x00000080 */
+#define ADC_TR1_LT1_8 (0x100U << ADC_TR1_LT1_Pos) /*!< 0x00000100 */
+#define ADC_TR1_LT1_9 (0x200U << ADC_TR1_LT1_Pos) /*!< 0x00000200 */
+#define ADC_TR1_LT1_10 (0x400U << ADC_TR1_LT1_Pos) /*!< 0x00000400 */
+#define ADC_TR1_LT1_11 (0x800U << ADC_TR1_LT1_Pos) /*!< 0x00000800 */
+
+#define ADC_TR1_HT1_Pos (16U)
+#define ADC_TR1_HT1_Msk (0xFFFU << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */
+#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */
+#define ADC_TR1_HT1_0 (0x001U << ADC_TR1_HT1_Pos) /*!< 0x00010000 */
+#define ADC_TR1_HT1_1 (0x002U << ADC_TR1_HT1_Pos) /*!< 0x00020000 */
+#define ADC_TR1_HT1_2 (0x004U << ADC_TR1_HT1_Pos) /*!< 0x00040000 */
+#define ADC_TR1_HT1_3 (0x008U << ADC_TR1_HT1_Pos) /*!< 0x00080000 */
+#define ADC_TR1_HT1_4 (0x010U << ADC_TR1_HT1_Pos) /*!< 0x00100000 */
+#define ADC_TR1_HT1_5 (0x020U << ADC_TR1_HT1_Pos) /*!< 0x00200000 */
+#define ADC_TR1_HT1_6 (0x040U << ADC_TR1_HT1_Pos) /*!< 0x00400000 */
+#define ADC_TR1_HT1_7 (0x080U << ADC_TR1_HT1_Pos) /*!< 0x00800000 */
+#define ADC_TR1_HT1_8 (0x100U << ADC_TR1_HT1_Pos) /*!< 0x01000000 */
+#define ADC_TR1_HT1_9 (0x200U << ADC_TR1_HT1_Pos) /*!< 0x02000000 */
+#define ADC_TR1_HT1_10 (0x400U << ADC_TR1_HT1_Pos) /*!< 0x04000000 */
+#define ADC_TR1_HT1_11 (0x800U << ADC_TR1_HT1_Pos) /*!< 0x08000000 */
+
+/******************** Bit definition for ADC_TR2 register *******************/
+#define ADC_TR2_LT2_Pos (0U)
+#define ADC_TR2_LT2_Msk (0xFFU << ADC_TR2_LT2_Pos) /*!< 0x000000FF */
+#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */
+#define ADC_TR2_LT2_0 (0x01U << ADC_TR2_LT2_Pos) /*!< 0x00000001 */
+#define ADC_TR2_LT2_1 (0x02U << ADC_TR2_LT2_Pos) /*!< 0x00000002 */
+#define ADC_TR2_LT2_2 (0x04U << ADC_TR2_LT2_Pos) /*!< 0x00000004 */
+#define ADC_TR2_LT2_3 (0x08U << ADC_TR2_LT2_Pos) /*!< 0x00000008 */
+#define ADC_TR2_LT2_4 (0x10U << ADC_TR2_LT2_Pos) /*!< 0x00000010 */
+#define ADC_TR2_LT2_5 (0x20U << ADC_TR2_LT2_Pos) /*!< 0x00000020 */
+#define ADC_TR2_LT2_6 (0x40U << ADC_TR2_LT2_Pos) /*!< 0x00000040 */
+#define ADC_TR2_LT2_7 (0x80U << ADC_TR2_LT2_Pos) /*!< 0x00000080 */
+
+#define ADC_TR2_HT2_Pos (16U)
+#define ADC_TR2_HT2_Msk (0xFFU << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */
+#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */
+#define ADC_TR2_HT2_0 (0x01U << ADC_TR2_HT2_Pos) /*!< 0x00010000 */
+#define ADC_TR2_HT2_1 (0x02U << ADC_TR2_HT2_Pos) /*!< 0x00020000 */
+#define ADC_TR2_HT2_2 (0x04U << ADC_TR2_HT2_Pos) /*!< 0x00040000 */
+#define ADC_TR2_HT2_3 (0x08U << ADC_TR2_HT2_Pos) /*!< 0x00080000 */
+#define ADC_TR2_HT2_4 (0x10U << ADC_TR2_HT2_Pos) /*!< 0x00100000 */
+#define ADC_TR2_HT2_5 (0x20U << ADC_TR2_HT2_Pos) /*!< 0x00200000 */
+#define ADC_TR2_HT2_6 (0x40U << ADC_TR2_HT2_Pos) /*!< 0x00400000 */
+#define ADC_TR2_HT2_7 (0x80U << ADC_TR2_HT2_Pos) /*!< 0x00800000 */
+
+/******************** Bit definition for ADC_TR3 register *******************/
+#define ADC_TR3_LT3_Pos (0U)
+#define ADC_TR3_LT3_Msk (0xFFU << ADC_TR3_LT3_Pos) /*!< 0x000000FF */
+#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */
+#define ADC_TR3_LT3_0 (0x01U << ADC_TR3_LT3_Pos) /*!< 0x00000001 */
+#define ADC_TR3_LT3_1 (0x02U << ADC_TR3_LT3_Pos) /*!< 0x00000002 */
+#define ADC_TR3_LT3_2 (0x04U << ADC_TR3_LT3_Pos) /*!< 0x00000004 */
+#define ADC_TR3_LT3_3 (0x08U << ADC_TR3_LT3_Pos) /*!< 0x00000008 */
+#define ADC_TR3_LT3_4 (0x10U << ADC_TR3_LT3_Pos) /*!< 0x00000010 */
+#define ADC_TR3_LT3_5 (0x20U << ADC_TR3_LT3_Pos) /*!< 0x00000020 */
+#define ADC_TR3_LT3_6 (0x40U << ADC_TR3_LT3_Pos) /*!< 0x00000040 */
+#define ADC_TR3_LT3_7 (0x80U << ADC_TR3_LT3_Pos) /*!< 0x00000080 */
+
+#define ADC_TR3_HT3_Pos (16U)
+#define ADC_TR3_HT3_Msk (0xFFU << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */
+#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */
+#define ADC_TR3_HT3_0 (0x01U << ADC_TR3_HT3_Pos) /*!< 0x00010000 */
+#define ADC_TR3_HT3_1 (0x02U << ADC_TR3_HT3_Pos) /*!< 0x00020000 */
+#define ADC_TR3_HT3_2 (0x04U << ADC_TR3_HT3_Pos) /*!< 0x00040000 */
+#define ADC_TR3_HT3_3 (0x08U << ADC_TR3_HT3_Pos) /*!< 0x00080000 */
+#define ADC_TR3_HT3_4 (0x10U << ADC_TR3_HT3_Pos) /*!< 0x00100000 */
+#define ADC_TR3_HT3_5 (0x20U << ADC_TR3_HT3_Pos) /*!< 0x00200000 */
+#define ADC_TR3_HT3_6 (0x40U << ADC_TR3_HT3_Pos) /*!< 0x00400000 */
+#define ADC_TR3_HT3_7 (0x80U << ADC_TR3_HT3_Pos) /*!< 0x00800000 */
+
+/******************** Bit definition for ADC_SQR1 register ******************/
+#define ADC_SQR1_L_Pos (0U)
+#define ADC_SQR1_L_Msk (0xFU << ADC_SQR1_L_Pos) /*!< 0x0000000F */
+#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */
+#define ADC_SQR1_L_0 (0x1U << ADC_SQR1_L_Pos) /*!< 0x00000001 */
+#define ADC_SQR1_L_1 (0x2U << ADC_SQR1_L_Pos) /*!< 0x00000002 */
+#define ADC_SQR1_L_2 (0x4U << ADC_SQR1_L_Pos) /*!< 0x00000004 */
+#define ADC_SQR1_L_3 (0x8U << ADC_SQR1_L_Pos) /*!< 0x00000008 */
+
+#define ADC_SQR1_SQ1_Pos (6U)
+#define ADC_SQR1_SQ1_Msk (0x1FU << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */
+#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */
+#define ADC_SQR1_SQ1_0 (0x01U << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */
+#define ADC_SQR1_SQ1_1 (0x02U << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */
+#define ADC_SQR1_SQ1_2 (0x04U << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */
+#define ADC_SQR1_SQ1_3 (0x08U << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */
+#define ADC_SQR1_SQ1_4 (0x10U << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */
+
+#define ADC_SQR1_SQ2_Pos (12U)
+#define ADC_SQR1_SQ2_Msk (0x1FU << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */
+#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */
+#define ADC_SQR1_SQ2_0 (0x01U << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */
+#define ADC_SQR1_SQ2_1 (0x02U << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */
+#define ADC_SQR1_SQ2_2 (0x04U << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */
+#define ADC_SQR1_SQ2_3 (0x08U << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */
+#define ADC_SQR1_SQ2_4 (0x10U << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */
+
+#define ADC_SQR1_SQ3_Pos (18U)
+#define ADC_SQR1_SQ3_Msk (0x1FU << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */
+#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */
+#define ADC_SQR1_SQ3_0 (0x01U << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */
+#define ADC_SQR1_SQ3_1 (0x02U << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */
+#define ADC_SQR1_SQ3_2 (0x04U << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */
+#define ADC_SQR1_SQ3_3 (0x08U << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */
+#define ADC_SQR1_SQ3_4 (0x10U << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */
+
+#define ADC_SQR1_SQ4_Pos (24U)
+#define ADC_SQR1_SQ4_Msk (0x1FU << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */
+#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */
+#define ADC_SQR1_SQ4_0 (0x01U << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */
+#define ADC_SQR1_SQ4_1 (0x02U << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */
+#define ADC_SQR1_SQ4_2 (0x04U << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */
+#define ADC_SQR1_SQ4_3 (0x08U << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */
+#define ADC_SQR1_SQ4_4 (0x10U << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */
+
+/******************** Bit definition for ADC_SQR2 register ******************/
+#define ADC_SQR2_SQ5_Pos (0U)
+#define ADC_SQR2_SQ5_Msk (0x1FU << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */
+#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */
+#define ADC_SQR2_SQ5_0 (0x01U << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */
+#define ADC_SQR2_SQ5_1 (0x02U << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */
+#define ADC_SQR2_SQ5_2 (0x04U << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */
+#define ADC_SQR2_SQ5_3 (0x08U << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */
+#define ADC_SQR2_SQ5_4 (0x10U << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */
+
+#define ADC_SQR2_SQ6_Pos (6U)
+#define ADC_SQR2_SQ6_Msk (0x1FU << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */
+#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */
+#define ADC_SQR2_SQ6_0 (0x01U << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */
+#define ADC_SQR2_SQ6_1 (0x02U << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */
+#define ADC_SQR2_SQ6_2 (0x04U << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */
+#define ADC_SQR2_SQ6_3 (0x08U << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */
+#define ADC_SQR2_SQ6_4 (0x10U << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */
+
+#define ADC_SQR2_SQ7_Pos (12U)
+#define ADC_SQR2_SQ7_Msk (0x1FU << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */
+#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */
+#define ADC_SQR2_SQ7_0 (0x01U << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */
+#define ADC_SQR2_SQ7_1 (0x02U << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */
+#define ADC_SQR2_SQ7_2 (0x04U << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */
+#define ADC_SQR2_SQ7_3 (0x08U << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */
+#define ADC_SQR2_SQ7_4 (0x10U << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */
+
+#define ADC_SQR2_SQ8_Pos (18U)
+#define ADC_SQR2_SQ8_Msk (0x1FU << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */
+#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */
+#define ADC_SQR2_SQ8_0 (0x01U << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */
+#define ADC_SQR2_SQ8_1 (0x02U << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */
+#define ADC_SQR2_SQ8_2 (0x04U << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */
+#define ADC_SQR2_SQ8_3 (0x08U << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */
+#define ADC_SQR2_SQ8_4 (0x10U << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */
+
+#define ADC_SQR2_SQ9_Pos (24U)
+#define ADC_SQR2_SQ9_Msk (0x1FU << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */
+#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */
+#define ADC_SQR2_SQ9_0 (0x01U << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */
+#define ADC_SQR2_SQ9_1 (0x02U << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */
+#define ADC_SQR2_SQ9_2 (0x04U << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */
+#define ADC_SQR2_SQ9_3 (0x08U << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */
+#define ADC_SQR2_SQ9_4 (0x10U << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */
+
+/******************** Bit definition for ADC_SQR3 register ******************/
+#define ADC_SQR3_SQ10_Pos (0U)
+#define ADC_SQR3_SQ10_Msk (0x1FU << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */
+#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */
+#define ADC_SQR3_SQ10_0 (0x01U << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */
+#define ADC_SQR3_SQ10_1 (0x02U << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */
+#define ADC_SQR3_SQ10_2 (0x04U << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */
+#define ADC_SQR3_SQ10_3 (0x08U << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */
+#define ADC_SQR3_SQ10_4 (0x10U << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */
+
+#define ADC_SQR3_SQ11_Pos (6U)
+#define ADC_SQR3_SQ11_Msk (0x1FU << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */
+#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */
+#define ADC_SQR3_SQ11_0 (0x01U << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */
+#define ADC_SQR3_SQ11_1 (0x02U << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */
+#define ADC_SQR3_SQ11_2 (0x04U << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */
+#define ADC_SQR3_SQ11_3 (0x08U << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */
+#define ADC_SQR3_SQ11_4 (0x10U << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */
+
+#define ADC_SQR3_SQ12_Pos (12U)
+#define ADC_SQR3_SQ12_Msk (0x1FU << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */
+#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */
+#define ADC_SQR3_SQ12_0 (0x01U << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */
+#define ADC_SQR3_SQ12_1 (0x02U << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */
+#define ADC_SQR3_SQ12_2 (0x04U << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */
+#define ADC_SQR3_SQ12_3 (0x08U << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */
+#define ADC_SQR3_SQ12_4 (0x10U << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */
+
+#define ADC_SQR3_SQ13_Pos (18U)
+#define ADC_SQR3_SQ13_Msk (0x1FU << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */
+#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */
+#define ADC_SQR3_SQ13_0 (0x01U << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */
+#define ADC_SQR3_SQ13_1 (0x02U << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */
+#define ADC_SQR3_SQ13_2 (0x04U << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */
+#define ADC_SQR3_SQ13_3 (0x08U << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */
+#define ADC_SQR3_SQ13_4 (0x10U << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */
+
+#define ADC_SQR3_SQ14_Pos (24U)
+#define ADC_SQR3_SQ14_Msk (0x1FU << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */
+#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */
+#define ADC_SQR3_SQ14_0 (0x01U << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */
+#define ADC_SQR3_SQ14_1 (0x02U << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */
+#define ADC_SQR3_SQ14_2 (0x04U << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */
+#define ADC_SQR3_SQ14_3 (0x08U << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */
+#define ADC_SQR3_SQ14_4 (0x10U << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */
+
+/******************** Bit definition for ADC_SQR4 register ******************/
+#define ADC_SQR4_SQ15_Pos (0U)
+#define ADC_SQR4_SQ15_Msk (0x1FU << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */
+#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */
+#define ADC_SQR4_SQ15_0 (0x01U << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */
+#define ADC_SQR4_SQ15_1 (0x02U << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */
+#define ADC_SQR4_SQ15_2 (0x04U << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */
+#define ADC_SQR4_SQ15_3 (0x08U << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */
+#define ADC_SQR4_SQ15_4 (0x10U << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */
+
+#define ADC_SQR4_SQ16_Pos (6U)
+#define ADC_SQR4_SQ16_Msk (0x1FU << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */
+#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */
+#define ADC_SQR4_SQ16_0 (0x01U << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */
+#define ADC_SQR4_SQ16_1 (0x02U << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */
+#define ADC_SQR4_SQ16_2 (0x04U << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */
+#define ADC_SQR4_SQ16_3 (0x08U << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */
+#define ADC_SQR4_SQ16_4 (0x10U << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_RDATA_Pos (0U)
+#define ADC_DR_RDATA_Msk (0xFFFFU << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */
+#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */
+#define ADC_DR_RDATA_0 (0x0001U << ADC_DR_RDATA_Pos) /*!< 0x00000001 */
+#define ADC_DR_RDATA_1 (0x0002U << ADC_DR_RDATA_Pos) /*!< 0x00000002 */
+#define ADC_DR_RDATA_2 (0x0004U << ADC_DR_RDATA_Pos) /*!< 0x00000004 */
+#define ADC_DR_RDATA_3 (0x0008U << ADC_DR_RDATA_Pos) /*!< 0x00000008 */
+#define ADC_DR_RDATA_4 (0x0010U << ADC_DR_RDATA_Pos) /*!< 0x00000010 */
+#define ADC_DR_RDATA_5 (0x0020U << ADC_DR_RDATA_Pos) /*!< 0x00000020 */
+#define ADC_DR_RDATA_6 (0x0040U << ADC_DR_RDATA_Pos) /*!< 0x00000040 */
+#define ADC_DR_RDATA_7 (0x0080U << ADC_DR_RDATA_Pos) /*!< 0x00000080 */
+#define ADC_DR_RDATA_8 (0x0100U << ADC_DR_RDATA_Pos) /*!< 0x00000100 */
+#define ADC_DR_RDATA_9 (0x0200U << ADC_DR_RDATA_Pos) /*!< 0x00000200 */
+#define ADC_DR_RDATA_10 (0x0400U << ADC_DR_RDATA_Pos) /*!< 0x00000400 */
+#define ADC_DR_RDATA_11 (0x0800U << ADC_DR_RDATA_Pos) /*!< 0x00000800 */
+#define ADC_DR_RDATA_12 (0x1000U << ADC_DR_RDATA_Pos) /*!< 0x00001000 */
+#define ADC_DR_RDATA_13 (0x2000U << ADC_DR_RDATA_Pos) /*!< 0x00002000 */
+#define ADC_DR_RDATA_14 (0x4000U << ADC_DR_RDATA_Pos) /*!< 0x00004000 */
+#define ADC_DR_RDATA_15 (0x8000U << ADC_DR_RDATA_Pos) /*!< 0x00008000 */
+
+/******************** Bit definition for ADC_JSQR register ******************/
+#define ADC_JSQR_JL_Pos (0U)
+#define ADC_JSQR_JL_Msk (0x3U << ADC_JSQR_JL_Pos) /*!< 0x00000003 */
+#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */
+#define ADC_JSQR_JL_0 (0x1U << ADC_JSQR_JL_Pos) /*!< 0x00000001 */
+#define ADC_JSQR_JL_1 (0x2U << ADC_JSQR_JL_Pos) /*!< 0x00000002 */
+
+#define ADC_JSQR_JEXTSEL_Pos (2U)
+#define ADC_JSQR_JEXTSEL_Msk (0xFU << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */
+#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */
+#define ADC_JSQR_JEXTSEL_0 (0x1U << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */
+#define ADC_JSQR_JEXTSEL_1 (0x2U << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */
+#define ADC_JSQR_JEXTSEL_2 (0x4U << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */
+#define ADC_JSQR_JEXTSEL_3 (0x8U << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */
+
+#define ADC_JSQR_JEXTEN_Pos (6U)
+#define ADC_JSQR_JEXTEN_Msk (0x3U << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */
+#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */
+#define ADC_JSQR_JEXTEN_0 (0x1U << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */
+#define ADC_JSQR_JEXTEN_1 (0x2U << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */
+
+#define ADC_JSQR_JSQ1_Pos (8U)
+#define ADC_JSQR_JSQ1_Msk (0x1FU << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */
+#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */
+#define ADC_JSQR_JSQ1_0 (0x01U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */
+#define ADC_JSQR_JSQ1_1 (0x02U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */
+#define ADC_JSQR_JSQ1_2 (0x04U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */
+#define ADC_JSQR_JSQ1_3 (0x08U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */
+#define ADC_JSQR_JSQ1_4 (0x10U << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */
+
+#define ADC_JSQR_JSQ2_Pos (14U)
+#define ADC_JSQR_JSQ2_Msk (0x1FU << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */
+#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */
+#define ADC_JSQR_JSQ2_0 (0x01U << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */
+#define ADC_JSQR_JSQ2_1 (0x02U << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */
+#define ADC_JSQR_JSQ2_2 (0x04U << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */
+#define ADC_JSQR_JSQ2_3 (0x08U << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */
+#define ADC_JSQR_JSQ2_4 (0x10U << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */
+
+#define ADC_JSQR_JSQ3_Pos (20U)
+#define ADC_JSQR_JSQ3_Msk (0x1FU << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */
+#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */
+#define ADC_JSQR_JSQ3_0 (0x01U << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */
+#define ADC_JSQR_JSQ3_1 (0x02U << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */
+#define ADC_JSQR_JSQ3_2 (0x04U << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */
+#define ADC_JSQR_JSQ3_3 (0x08U << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */
+#define ADC_JSQR_JSQ3_4 (0x10U << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */
+
+#define ADC_JSQR_JSQ4_Pos (26U)
+#define ADC_JSQR_JSQ4_Msk (0x1FU << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */
+#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */
+#define ADC_JSQR_JSQ4_0 (0x01U << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */
+#define ADC_JSQR_JSQ4_1 (0x02U << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */
+#define ADC_JSQR_JSQ4_2 (0x04U << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */
+#define ADC_JSQR_JSQ4_3 (0x08U << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */
+#define ADC_JSQR_JSQ4_4 (0x10U << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */
+
+
+/******************** Bit definition for ADC_OFR1 register ******************/
+#define ADC_OFR1_OFFSET1_Pos (0U)
+#define ADC_OFR1_OFFSET1_Msk (0xFFFU << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */
+#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */
+#define ADC_OFR1_OFFSET1_0 (0x001U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */
+#define ADC_OFR1_OFFSET1_1 (0x002U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */
+#define ADC_OFR1_OFFSET1_2 (0x004U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */
+#define ADC_OFR1_OFFSET1_3 (0x008U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */
+#define ADC_OFR1_OFFSET1_4 (0x010U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */
+#define ADC_OFR1_OFFSET1_5 (0x020U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */
+#define ADC_OFR1_OFFSET1_6 (0x040U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */
+#define ADC_OFR1_OFFSET1_7 (0x080U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */
+#define ADC_OFR1_OFFSET1_8 (0x100U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */
+#define ADC_OFR1_OFFSET1_9 (0x200U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */
+#define ADC_OFR1_OFFSET1_10 (0x400U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */
+#define ADC_OFR1_OFFSET1_11 (0x800U << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */
+
+#define ADC_OFR1_OFFSET1_CH_Pos (26U)
+#define ADC_OFR1_OFFSET1_CH_Msk (0x1FU << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */
+#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */
+#define ADC_OFR1_OFFSET1_CH_0 (0x01U << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */
+#define ADC_OFR1_OFFSET1_CH_1 (0x02U << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */
+#define ADC_OFR1_OFFSET1_CH_2 (0x04U << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */
+#define ADC_OFR1_OFFSET1_CH_3 (0x08U << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */
+#define ADC_OFR1_OFFSET1_CH_4 (0x10U << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */
+
+#define ADC_OFR1_OFFSET1_EN_Pos (31U)
+#define ADC_OFR1_OFFSET1_EN_Msk (0x1U << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */
+#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */
+
+/******************** Bit definition for ADC_OFR2 register ******************/
+#define ADC_OFR2_OFFSET2_Pos (0U)
+#define ADC_OFR2_OFFSET2_Msk (0xFFFU << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */
+#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */
+#define ADC_OFR2_OFFSET2_0 (0x001U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */
+#define ADC_OFR2_OFFSET2_1 (0x002U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */
+#define ADC_OFR2_OFFSET2_2 (0x004U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */
+#define ADC_OFR2_OFFSET2_3 (0x008U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */
+#define ADC_OFR2_OFFSET2_4 (0x010U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */
+#define ADC_OFR2_OFFSET2_5 (0x020U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */
+#define ADC_OFR2_OFFSET2_6 (0x040U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */
+#define ADC_OFR2_OFFSET2_7 (0x080U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */
+#define ADC_OFR2_OFFSET2_8 (0x100U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */
+#define ADC_OFR2_OFFSET2_9 (0x200U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */
+#define ADC_OFR2_OFFSET2_10 (0x400U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */
+#define ADC_OFR2_OFFSET2_11 (0x800U << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */
+
+#define ADC_OFR2_OFFSET2_CH_Pos (26U)
+#define ADC_OFR2_OFFSET2_CH_Msk (0x1FU << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */
+#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */
+#define ADC_OFR2_OFFSET2_CH_0 (0x01U << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */
+#define ADC_OFR2_OFFSET2_CH_1 (0x02U << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */
+#define ADC_OFR2_OFFSET2_CH_2 (0x04U << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */
+#define ADC_OFR2_OFFSET2_CH_3 (0x08U << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */
+#define ADC_OFR2_OFFSET2_CH_4 (0x10U << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */
+
+#define ADC_OFR2_OFFSET2_EN_Pos (31U)
+#define ADC_OFR2_OFFSET2_EN_Msk (0x1U << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */
+#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */
+
+/******************** Bit definition for ADC_OFR3 register ******************/
+#define ADC_OFR3_OFFSET3_Pos (0U)
+#define ADC_OFR3_OFFSET3_Msk (0xFFFU << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */
+#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */
+#define ADC_OFR3_OFFSET3_0 (0x001U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */
+#define ADC_OFR3_OFFSET3_1 (0x002U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */
+#define ADC_OFR3_OFFSET3_2 (0x004U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */
+#define ADC_OFR3_OFFSET3_3 (0x008U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */
+#define ADC_OFR3_OFFSET3_4 (0x010U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */
+#define ADC_OFR3_OFFSET3_5 (0x020U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */
+#define ADC_OFR3_OFFSET3_6 (0x040U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */
+#define ADC_OFR3_OFFSET3_7 (0x080U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */
+#define ADC_OFR3_OFFSET3_8 (0x100U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */
+#define ADC_OFR3_OFFSET3_9 (0x200U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */
+#define ADC_OFR3_OFFSET3_10 (0x400U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */
+#define ADC_OFR3_OFFSET3_11 (0x800U << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */
+
+#define ADC_OFR3_OFFSET3_CH_Pos (26U)
+#define ADC_OFR3_OFFSET3_CH_Msk (0x1FU << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */
+#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */
+#define ADC_OFR3_OFFSET3_CH_0 (0x01U << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */
+#define ADC_OFR3_OFFSET3_CH_1 (0x02U << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */
+#define ADC_OFR3_OFFSET3_CH_2 (0x04U << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */
+#define ADC_OFR3_OFFSET3_CH_3 (0x08U << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */
+#define ADC_OFR3_OFFSET3_CH_4 (0x10U << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */
+
+#define ADC_OFR3_OFFSET3_EN_Pos (31U)
+#define ADC_OFR3_OFFSET3_EN_Msk (0x1U << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */
+#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */
+
+/******************** Bit definition for ADC_OFR4 register ******************/
+#define ADC_OFR4_OFFSET4_Pos (0U)
+#define ADC_OFR4_OFFSET4_Msk (0xFFFU << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */
+#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */
+#define ADC_OFR4_OFFSET4_0 (0x001U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */
+#define ADC_OFR4_OFFSET4_1 (0x002U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */
+#define ADC_OFR4_OFFSET4_2 (0x004U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */
+#define ADC_OFR4_OFFSET4_3 (0x008U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */
+#define ADC_OFR4_OFFSET4_4 (0x010U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */
+#define ADC_OFR4_OFFSET4_5 (0x020U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */
+#define ADC_OFR4_OFFSET4_6 (0x040U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */
+#define ADC_OFR4_OFFSET4_7 (0x080U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */
+#define ADC_OFR4_OFFSET4_8 (0x100U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */
+#define ADC_OFR4_OFFSET4_9 (0x200U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */
+#define ADC_OFR4_OFFSET4_10 (0x400U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */
+#define ADC_OFR4_OFFSET4_11 (0x800U << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */
+
+#define ADC_OFR4_OFFSET4_CH_Pos (26U)
+#define ADC_OFR4_OFFSET4_CH_Msk (0x1FU << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */
+#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */
+#define ADC_OFR4_OFFSET4_CH_0 (0x01U << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */
+#define ADC_OFR4_OFFSET4_CH_1 (0x02U << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */
+#define ADC_OFR4_OFFSET4_CH_2 (0x04U << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */
+#define ADC_OFR4_OFFSET4_CH_3 (0x08U << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */
+#define ADC_OFR4_OFFSET4_CH_4 (0x10U << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */
+
+#define ADC_OFR4_OFFSET4_EN_Pos (31U)
+#define ADC_OFR4_OFFSET4_EN_Msk (0x1U << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */
+#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */
+
+/******************** Bit definition for ADC_JDR1 register ******************/
+#define ADC_JDR1_JDATA_Pos (0U)
+#define ADC_JDR1_JDATA_Msk (0xFFFFU << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */
+#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */
+#define ADC_JDR1_JDATA_0 (0x0001U << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */
+#define ADC_JDR1_JDATA_1 (0x0002U << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */
+#define ADC_JDR1_JDATA_2 (0x0004U << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */
+#define ADC_JDR1_JDATA_3 (0x0008U << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */
+#define ADC_JDR1_JDATA_4 (0x0010U << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */
+#define ADC_JDR1_JDATA_5 (0x0020U << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */
+#define ADC_JDR1_JDATA_6 (0x0040U << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */
+#define ADC_JDR1_JDATA_7 (0x0080U << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */
+#define ADC_JDR1_JDATA_8 (0x0100U << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */
+#define ADC_JDR1_JDATA_9 (0x0200U << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */
+#define ADC_JDR1_JDATA_10 (0x0400U << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */
+#define ADC_JDR1_JDATA_11 (0x0800U << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */
+#define ADC_JDR1_JDATA_12 (0x1000U << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */
+#define ADC_JDR1_JDATA_13 (0x2000U << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */
+#define ADC_JDR1_JDATA_14 (0x4000U << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */
+#define ADC_JDR1_JDATA_15 (0x8000U << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */
+
+/******************** Bit definition for ADC_JDR2 register ******************/
+#define ADC_JDR2_JDATA_Pos (0U)
+#define ADC_JDR2_JDATA_Msk (0xFFFFU << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */
+#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */
+#define ADC_JDR2_JDATA_0 (0x0001U << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */
+#define ADC_JDR2_JDATA_1 (0x0002U << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */
+#define ADC_JDR2_JDATA_2 (0x0004U << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */
+#define ADC_JDR2_JDATA_3 (0x0008U << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */
+#define ADC_JDR2_JDATA_4 (0x0010U << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */
+#define ADC_JDR2_JDATA_5 (0x0020U << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */
+#define ADC_JDR2_JDATA_6 (0x0040U << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */
+#define ADC_JDR2_JDATA_7 (0x0080U << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */
+#define ADC_JDR2_JDATA_8 (0x0100U << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */
+#define ADC_JDR2_JDATA_9 (0x0200U << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */
+#define ADC_JDR2_JDATA_10 (0x0400U << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */
+#define ADC_JDR2_JDATA_11 (0x0800U << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */
+#define ADC_JDR2_JDATA_12 (0x1000U << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */
+#define ADC_JDR2_JDATA_13 (0x2000U << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */
+#define ADC_JDR2_JDATA_14 (0x4000U << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */
+#define ADC_JDR2_JDATA_15 (0x8000U << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */
+
+/******************** Bit definition for ADC_JDR3 register ******************/
+#define ADC_JDR3_JDATA_Pos (0U)
+#define ADC_JDR3_JDATA_Msk (0xFFFFU << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */
+#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */
+#define ADC_JDR3_JDATA_0 (0x0001U << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */
+#define ADC_JDR3_JDATA_1 (0x0002U << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */
+#define ADC_JDR3_JDATA_2 (0x0004U << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */
+#define ADC_JDR3_JDATA_3 (0x0008U << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */
+#define ADC_JDR3_JDATA_4 (0x0010U << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */
+#define ADC_JDR3_JDATA_5 (0x0020U << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */
+#define ADC_JDR3_JDATA_6 (0x0040U << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */
+#define ADC_JDR3_JDATA_7 (0x0080U << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */
+#define ADC_JDR3_JDATA_8 (0x0100U << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */
+#define ADC_JDR3_JDATA_9 (0x0200U << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */
+#define ADC_JDR3_JDATA_10 (0x0400U << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */
+#define ADC_JDR3_JDATA_11 (0x0800U << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */
+#define ADC_JDR3_JDATA_12 (0x1000U << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */
+#define ADC_JDR3_JDATA_13 (0x2000U << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */
+#define ADC_JDR3_JDATA_14 (0x4000U << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */
+#define ADC_JDR3_JDATA_15 (0x8000U << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */
+
+/******************** Bit definition for ADC_JDR4 register ******************/
+#define ADC_JDR4_JDATA_Pos (0U)
+#define ADC_JDR4_JDATA_Msk (0xFFFFU << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */
+#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */
+#define ADC_JDR4_JDATA_0 (0x0001U << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */
+#define ADC_JDR4_JDATA_1 (0x0002U << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */
+#define ADC_JDR4_JDATA_2 (0x0004U << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */
+#define ADC_JDR4_JDATA_3 (0x0008U << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */
+#define ADC_JDR4_JDATA_4 (0x0010U << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */
+#define ADC_JDR4_JDATA_5 (0x0020U << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */
+#define ADC_JDR4_JDATA_6 (0x0040U << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */
+#define ADC_JDR4_JDATA_7 (0x0080U << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */
+#define ADC_JDR4_JDATA_8 (0x0100U << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */
+#define ADC_JDR4_JDATA_9 (0x0200U << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */
+#define ADC_JDR4_JDATA_10 (0x0400U << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */
+#define ADC_JDR4_JDATA_11 (0x0800U << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */
+#define ADC_JDR4_JDATA_12 (0x1000U << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */
+#define ADC_JDR4_JDATA_13 (0x2000U << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */
+#define ADC_JDR4_JDATA_14 (0x4000U << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */
+#define ADC_JDR4_JDATA_15 (0x8000U << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */
+
+/******************** Bit definition for ADC_AWD2CR register ****************/
+#define ADC_AWD2CR_AWD2CH_Pos (0U)
+#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFU << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */
+#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */
+#define ADC_AWD2CR_AWD2CH_0 (0x00001U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */
+#define ADC_AWD2CR_AWD2CH_1 (0x00002U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */
+#define ADC_AWD2CR_AWD2CH_2 (0x00004U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */
+#define ADC_AWD2CR_AWD2CH_3 (0x00008U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */
+#define ADC_AWD2CR_AWD2CH_4 (0x00010U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */
+#define ADC_AWD2CR_AWD2CH_5 (0x00020U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */
+#define ADC_AWD2CR_AWD2CH_6 (0x00040U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */
+#define ADC_AWD2CR_AWD2CH_7 (0x00080U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */
+#define ADC_AWD2CR_AWD2CH_8 (0x00100U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */
+#define ADC_AWD2CR_AWD2CH_9 (0x00200U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */
+#define ADC_AWD2CR_AWD2CH_10 (0x00400U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */
+#define ADC_AWD2CR_AWD2CH_11 (0x00800U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */
+#define ADC_AWD2CR_AWD2CH_12 (0x01000U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */
+#define ADC_AWD2CR_AWD2CH_13 (0x02000U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */
+#define ADC_AWD2CR_AWD2CH_14 (0x04000U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */
+#define ADC_AWD2CR_AWD2CH_15 (0x08000U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */
+#define ADC_AWD2CR_AWD2CH_16 (0x10000U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */
+#define ADC_AWD2CR_AWD2CH_17 (0x20000U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */
+#define ADC_AWD2CR_AWD2CH_18 (0x40000U << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */
+
+/******************** Bit definition for ADC_AWD3CR register ****************/
+#define ADC_AWD3CR_AWD3CH_Pos (0U)
+#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFU << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */
+#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */
+#define ADC_AWD3CR_AWD3CH_0 (0x00001U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */
+#define ADC_AWD3CR_AWD3CH_1 (0x00002U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */
+#define ADC_AWD3CR_AWD3CH_2 (0x00004U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */
+#define ADC_AWD3CR_AWD3CH_3 (0x00008U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */
+#define ADC_AWD3CR_AWD3CH_4 (0x00010U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */
+#define ADC_AWD3CR_AWD3CH_5 (0x00020U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */
+#define ADC_AWD3CR_AWD3CH_6 (0x00040U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */
+#define ADC_AWD3CR_AWD3CH_7 (0x00080U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */
+#define ADC_AWD3CR_AWD3CH_8 (0x00100U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */
+#define ADC_AWD3CR_AWD3CH_9 (0x00200U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */
+#define ADC_AWD3CR_AWD3CH_10 (0x00400U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */
+#define ADC_AWD3CR_AWD3CH_11 (0x00800U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */
+#define ADC_AWD3CR_AWD3CH_12 (0x01000U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */
+#define ADC_AWD3CR_AWD3CH_13 (0x02000U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */
+#define ADC_AWD3CR_AWD3CH_14 (0x04000U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */
+#define ADC_AWD3CR_AWD3CH_15 (0x08000U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */
+#define ADC_AWD3CR_AWD3CH_16 (0x10000U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */
+#define ADC_AWD3CR_AWD3CH_17 (0x20000U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */
+#define ADC_AWD3CR_AWD3CH_18 (0x40000U << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */
+
+/******************** Bit definition for ADC_DIFSEL register ****************/
+#define ADC_DIFSEL_DIFSEL_Pos (0U)
+#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFU << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */
+#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */
+#define ADC_DIFSEL_DIFSEL_0 (0x00001U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */
+#define ADC_DIFSEL_DIFSEL_1 (0x00002U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */
+#define ADC_DIFSEL_DIFSEL_2 (0x00004U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */
+#define ADC_DIFSEL_DIFSEL_3 (0x00008U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */
+#define ADC_DIFSEL_DIFSEL_4 (0x00010U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */
+#define ADC_DIFSEL_DIFSEL_5 (0x00020U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */
+#define ADC_DIFSEL_DIFSEL_6 (0x00040U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */
+#define ADC_DIFSEL_DIFSEL_7 (0x00080U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */
+#define ADC_DIFSEL_DIFSEL_8 (0x00100U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */
+#define ADC_DIFSEL_DIFSEL_9 (0x00200U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */
+#define ADC_DIFSEL_DIFSEL_10 (0x00400U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */
+#define ADC_DIFSEL_DIFSEL_11 (0x00800U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */
+#define ADC_DIFSEL_DIFSEL_12 (0x01000U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */
+#define ADC_DIFSEL_DIFSEL_13 (0x02000U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */
+#define ADC_DIFSEL_DIFSEL_14 (0x04000U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */
+#define ADC_DIFSEL_DIFSEL_15 (0x08000U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */
+#define ADC_DIFSEL_DIFSEL_16 (0x10000U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */
+#define ADC_DIFSEL_DIFSEL_17 (0x20000U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */
+#define ADC_DIFSEL_DIFSEL_18 (0x40000U << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */
+
+/******************** Bit definition for ADC_CALFACT register ***************/
+#define ADC_CALFACT_CALFACT_S_Pos (0U)
+#define ADC_CALFACT_CALFACT_S_Msk (0x7FU << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */
+#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */
+#define ADC_CALFACT_CALFACT_S_0 (0x01U << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */
+#define ADC_CALFACT_CALFACT_S_1 (0x02U << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */
+#define ADC_CALFACT_CALFACT_S_2 (0x04U << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */
+#define ADC_CALFACT_CALFACT_S_3 (0x08U << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */
+#define ADC_CALFACT_CALFACT_S_4 (0x10U << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */
+#define ADC_CALFACT_CALFACT_S_5 (0x20U << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */
+#define ADC_CALFACT_CALFACT_S_6 (0x40U << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */
+
+#define ADC_CALFACT_CALFACT_D_Pos (16U)
+#define ADC_CALFACT_CALFACT_D_Msk (0x7FU << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */
+#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */
+#define ADC_CALFACT_CALFACT_D_0 (0x01U << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */
+#define ADC_CALFACT_CALFACT_D_1 (0x02U << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */
+#define ADC_CALFACT_CALFACT_D_2 (0x04U << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */
+#define ADC_CALFACT_CALFACT_D_3 (0x08U << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */
+#define ADC_CALFACT_CALFACT_D_4 (0x10U << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */
+#define ADC_CALFACT_CALFACT_D_5 (0x20U << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */
+#define ADC_CALFACT_CALFACT_D_6 (0x40U << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */
+
+/************************* ADC Common registers *****************************/
+/******************** Bit definition for ADC_CCR register *******************/
+#define ADC_CCR_CKMODE_Pos (16U)
+#define ADC_CCR_CKMODE_Msk (0x3U << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */
+#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */
+#define ADC_CCR_CKMODE_0 (0x1U << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */
+#define ADC_CCR_CKMODE_1 (0x2U << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */
+
+#define ADC_CCR_PRESC_Pos (18U)
+#define ADC_CCR_PRESC_Msk (0xFU << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */
+#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */
+#define ADC_CCR_PRESC_0 (0x1U << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */
+#define ADC_CCR_PRESC_1 (0x2U << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */
+#define ADC_CCR_PRESC_2 (0x4U << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */
+#define ADC_CCR_PRESC_3 (0x8U << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */
+
+#define ADC_CCR_VREFEN_Pos (22U)
+#define ADC_CCR_VREFEN_Msk (0x1U << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */
+#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */
+#define ADC_CCR_TSEN_Pos (23U)
+#define ADC_CCR_TSEN_Msk (0x1U << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */
+#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */
+#define ADC_CCR_VBATEN_Pos (24U)
+#define ADC_CCR_VBATEN_Msk (0x1U << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */
+#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ_Pos (0U)
+#define CAN_MCR_INRQ_Msk (0x1U << CAN_MCR_INRQ_Pos) /*!< 0x00000001 */
+#define CAN_MCR_INRQ CAN_MCR_INRQ_Msk /*!*/
+#define DAC_CR_CEN1_Pos (14U)
+#define DAC_CR_CEN1_Msk (0x1U << DAC_CR_CEN1_Pos) /*!< 0x00004000 */
+#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/
+
+#define DAC_CR_EN2_Pos (16U)
+#define DAC_CR_EN2_Msk (0x1U << DAC_CR_EN2_Pos) /*!< 0x00010000 */
+#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/
+#define DAC_CR_CEN2_Pos (30U)
+#define DAC_CR_CEN2_Msk (0x1U << DAC_CR_CEN2_Pos) /*!< 0x40000000 */
+#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1_Pos (0U)
+#define DAC_SWTRIGR_SWTRIG1_Msk (0x1U << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */
+#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l4xx
+ * @{
+ */
+
+#ifndef __STM32L4xx_H
+#define __STM32L4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32L4)
+#define STM32L4
+#endif /* STM32L4 */
+
+/* Uncomment the line below according to the target STM32L4 device used in your
+ application
+ */
+
+#if !defined (STM32L431xx) && !defined (STM32L432xx) && !defined (STM32L433xx) && !defined (STM32L442xx) && !defined (STM32L443xx) && \
+ !defined (STM32L471xx) && !defined (STM32L475xx) && !defined (STM32L476xx) && !defined (STM32L485xx) && !defined (STM32L486xx)
+ /* #define STM32L431xx */ /*!< STM32L431xx Devices */
+#define STM32L432xx /*!< STM32L432xx Devices */
+ /* #define STM32L433xx */ /*!< STM32L433xx Devices */
+ /* #define STM32L442xx */ /*!< STM32L442xx Devices */
+ /* #define STM32L443xx */ /*!< STM32L443xx Devices */
+ /* #define STM32L471xx */ /*!< STM32L471xx Devices */
+ /* #define STM32L475xx */ /*!< STM32L475xx Devices */
+ /* #define STM32L476xx */ /*!< STM32L476xx Devices */
+ /* #define STM32L485xx */ /*!< STM32L485xx Devices */
+ /* #define STM32L486xx */ /*!< STM32L486xx Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ #define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V1.1.1
+ */
+#define __STM32L4_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32L4_CMSIS_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32L4_CMSIS_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32L4_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32L4_CMSIS_VERSION ((__STM32L4_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32L4_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32L4_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32L4_CMSIS_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32L431xx)
+ #include "stm32l431xx.h"
+#elif defined(STM32L432xx)
+ #include "stm32l432xx.h"
+#elif defined(STM32L433xx)
+ #include "stm32l433xx.h"
+#elif defined(STM32L442xx)
+ #include "stm32l442xx.h"
+#elif defined(STM32L443xx)
+ #include "stm32l443xx.h"
+#elif defined(STM32L451xx)
+ #include "stm32l451xx.h"
+#elif defined(STM32L452xx)
+ #include "stm32l452xx.h"
+#elif defined(STM32L462xx)
+ #include "stm32l462xx.h"
+#elif defined(STM32L471xx)
+ #include "stm32l471xx.h"
+#elif defined(STM32L475xx)
+ #include "stm32l475xx.h"
+#elif defined(STM32L476xx)
+ #include "stm32l476xx.h"
+#elif defined(STM32L485xx)
+ #include "stm32l485xx.h"
+#elif defined(STM32L486xx)
+ #include "stm32l486xx.h"
+#elif defined(STM32L496xx)
+ #include "stm32l496xx.h"
+#elif defined(STM32L4A6xx)
+ #include "stm32l4a6xx.h"
+#elif defined(STM32L4R5xx)
+ #include "stm32l4r5xx.h"
+#elif defined(STM32L4R9xx)
+ #include "stm32l4r9xx.h"
+#elif defined(STM32L4S5xx)
+ #include "stm32l4s5xx.h"
+#elif defined(STM32L4S9xx)
+ #include "stm32l4s9xx.h"
+#else
+ #error "Please select first the target STM32L4xx device used in your application (in stm32l4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32l4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/stm32l4xx_hal_conf.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/stm32l4xx_hal_conf.h
new file mode 100644
index 0000000000..5655b428cf
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/stm32l4xx_hal_conf.h
@@ -0,0 +1,384 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 29-April-2016
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32l4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_CONF_H
+#define __STM32L4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FIREWALL_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SWPMI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)200U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ * This value is the default MSI range value after Reset.
+ */
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+ * This internal oscillator is mainly dedicated to provide a high precision clock to
+ * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+ * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+ * which is subject to manufacturing process variations.
+ */
+#if !defined (HSI48_VALUE)
+ #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+ The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for SAI1 peripheral
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+ * frequency.
+ */
+#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
+ #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)48000U) /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/**
+ * @brief External clock source for SAI2 peripheral
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+ * frequency.
+ */
+#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
+ #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000U) /*!< Value of the SAI2 External clock source in Hz*/
+#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 0
+#define INSTRUCTION_CACHE_ENABLE 1
+#define DATA_CACHE_ENABLE 1
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32l4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32l4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32l4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32l4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32l4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32l4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32l4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32l4xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32l4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32l4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32l4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FIREWALL_MODULE_ENABLED
+ #include "stm32l4xx_hal_firewall.h"
+#endif /* HAL_FIREWALL_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32l4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32l4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32l4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32l4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32l4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32l4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32l4xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32l4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32l4xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32l4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32l4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32l4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32l4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32l4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32l4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32l4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32l4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+ #include "stm32l4xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32l4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32l4xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32l4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32l4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32l4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32l4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32l4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32l4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32l4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/system_stm32l4xx.c b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/system_stm32l4xx.c
new file mode 100644
index 0000000000..05a8f3f640
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/system_stm32l4xx.c
@@ -0,0 +1,592 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l4xx.c
+ * @author MCD Application Team
+ * @version V1.1.1
+ * @date 29-April-2016
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32l4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * After each device reset the MSI (4 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * This file configures the system clock as follows:
+ *=============================================================================
+ * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
+ * | (external 8 MHz clock) | (internal 16 MHz)
+ * | 2- PLL_HSE_XTAL | or PLL_MSI
+ * | (external 8 MHz xtal) | (internal 4 MHz)
+ *-----------------------------------------------------------------------------
+ * SYSCLK(MHz) | 48 | 80
+ *-----------------------------------------------------------------------------
+ * AHBCLK (MHz) | 48 | 80
+ *-----------------------------------------------------------------------------
+ * APB1CLK (MHz) | 48 | 80
+ *-----------------------------------------------------------------------------
+ * APB2CLK (MHz) | 48 | 80
+ *-----------------------------------------------------------------------------
+ * USB capable (48 MHz precise clock) | YES | NO
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32l4xx.h"
+#include "hal_tick.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Macros
+ * @{
+ */
+
+// Select the clock sources (default is PLL_MSI) to start with (0=OFF, 1=ON)
+#define USE_PLL_HSE_EXTC (1) // Use external clock
+#define USE_PLL_HSE_XTAL (0) // Use external xtal
+#define USE_PLL_HSI (0) // Use HSI/MSI internal clock (0=MSI, 1=HSI)
+#define DEBUG_MCO (0) // Output the MCO on PA8 for debugging (0=OFF, 1=SYSCLK, 2=HSE, 3=HSI, 4=MSI)
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Variables
+ * @{
+ */
+ /* The SystemCoreClock variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 4000000;
+
+ const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+ const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+ const uint32_t MSIRangeTable[12] = {100000, 200000, 400000, 800000, 1000000, 2000000, \
+ 4000000, 8000000, 16000000, 24000000, 32000000, 48000000};
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+#if (USE_PLL_HSI != 0)
+uint8_t SetSysClock_PLL_HSI(void);
+#endif
+
+uint8_t SetSysClock_PLL_MSI(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * @param None
+ * @retval None
+ */
+
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set MSION bit */
+ RCC->CR |= RCC_CR_MSION;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON , HSION, and PLLON bits */
+ RCC->CR &= (uint32_t)0xEAF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x00000800;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIER = 0x00000000;
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+ /* Configure the Cube driver */
+ SystemCoreClock = MSI_VALUE; // At this stage the MSI is used as system clock
+ HAL_Init();
+
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings */
+ SetSysClock();
+
+ /* Reset the timer to avoid issues after the RAM initialization */
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
+ * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
+ * 4 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, msirange = 0, pllvco = 0, pllr = 2, pllsource = 0, pllm = 2;
+
+ /* Get MSI Range frequency--------------------------------------------------*/
+ if((RCC->CR & RCC_CR_MSIRGSEL) == RESET)
+ { /* MSISRANGE from RCC_CSR applies */
+ msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8;
+ }
+ else
+ { /* MSIRANGE from RCC_CR applies */
+ msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4;
+ }
+ /*MSI frequency range in HZ*/
+ msirange = MSIRangeTable[msirange];
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case 0x00: /* MSI used as system clock source */
+ SystemCoreClock = msirange;
+ break;
+
+ case 0x04: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+
+ case 0x08: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+
+ case 0x0C: /* PLL used as system clock source */
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLR
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4) + 1 ;
+
+ switch (pllsource)
+ {
+ case 0x02: /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm);
+ break;
+
+ case 0x03: /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm);
+ break;
+
+ default: /* MSI used as PLL clock source */
+ pllvco = (msirange / pllm);
+ break;
+ }
+ pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8);
+ pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25) + 1) * 2;
+ SystemCoreClock = pllvco/pllr;
+ break;
+
+ default:
+ SystemCoreClock = msirange;
+ break;
+ }
+ /* Compute HCLK clock frequency --------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+#if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+#endif
+ {
+ /* 3- If fail start with HSI or MSI clock */
+#if (USE_PLL_HSI != 0)
+ if (SetSysClock_PLL_HSI() == 0)
+#else
+ if (SetSysClock_PLL_MSI() == 0)
+#endif
+ {
+ while(1)
+ {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+
+ // Output clock on MCO1 pin(PA8) for debugging purpose
+#if DEBUG_MCO == 1
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
+#endif
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+ RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+
+ // Used to gain time after DeepSleep in case HSI is used
+ if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ return 0;
+ }
+
+ // Select MSI as system clock source to allow modification of the PLL configuration
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
+ HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
+
+ // Enable HSE oscillator and activate PLL with HSE as source
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
+ if (bypass == 0)
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
+ }
+ else
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
+ }
+ RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+
+ // Non-USB configuration : sysclock = 80MHz
+ //RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
+ //RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
+ //RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7)
+ //RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 40 MHz (160 MHz / 4) --> Not good for USB
+ //RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
+
+ // USB configuration : sysclock = 48 MHz
+ RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
+ RCC_OscInitStruct.PLL.PLLN = 24; // VCO output clock = 192 MHz (8 MHz * 24)
+ RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 27.4 MHz (192 MHz / 7)
+ RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 48 MHz (192 MHz / 4) --> OK for USB
+ RCC_OscInitStruct.PLL.PLLR = 4; // PLL clock = 48 MHz (192 MHz / 4)
+
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ // Select PLL clock as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz or 48 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz or 48 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ // Disable MSI Oscillator
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+ // Output clock on MCO1 pin(PA8) for debugging purpose
+#if DEBUG_MCO == 2
+ if (bypass == 0)
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
+ else
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
+#endif
+
+ return 1; // OK
+}
+#endif
+
+#if (USE_PLL_HSI != 0)
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+ RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+
+ // Select MSI as system clock source to allow modification of the PLL configuration
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
+ HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
+
+ // Enable HSI oscillator and activate PLL with HSI as source
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; // 16 MHz
+ RCC_OscInitStruct.PLL.PLLM = 2; // VCO input clock = 8 MHz (16 MHz / 2)
+ RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
+ RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7)
+ RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 40 MHz (160 MHz / 4) --> Not good for USB
+ RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ // Disable MSI Oscillator
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+ // Output clock on MCO1 pin(PA8) for debugging purpose
+#if DEBUG_MCO == 3
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+#endif
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by MSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_MSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+ RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+
+ // Enable LSE Oscillator to automatically calibrate the MSI clock
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
+ RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
+ RCC->CR |= RCC_CR_MSIPLLEN; // Enable MSI PLL-mode
+ }
+
+ // Enable MSI oscillator and activate PLL with MSI as source
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
+ RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6;
+ RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; // 4 MHz
+ RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 4 MHz (4 MHz / 1)
+ RCC_OscInitStruct.PLL.PLLN = 40; // VCO output clock = 160 MHz (4 MHz * 40)
+ RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22.86 MHz (160 MHz / 7)
+ RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock (PLL48M1) = 40 MHz (160 MHz / 4) --> Not good for USB
+ RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ // Output clock on MCO1 pin(PA8) for debugging purpose
+#if DEBUG_MCO == 4
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_MSI, RCC_MCODIV_2); // 2 MHz
+#endif
+
+ return 1; // OK
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/system_stm32l4xx.h b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/system_stm32l4xx.h
new file mode 100644
index 0000000000..68e360da06
--- /dev/null
+++ b/hal/targets/cmsis/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L432KC/system_stm32l4xx.h
@@ -0,0 +1,127 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l4xx.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 26-June-2015
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32L4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2015 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32L4XX_H
+#define __SYSTEM_STM32L4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32L4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32L4xx_System_Exported_Variables
+ * @{
+ */
+ /* The SystemCoreClock variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+extern const uint32_t MSIRangeTable[12]; /*!< MSI ranges table values */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32L4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/