Merge pull request #2461 from svastm/serial_asynch_f3

[STM32F3] Add asynchronous serial

hal/targets.json

@@ -714,7 +714,7 @@
         "inherits": ["Target"],
         "progen": {"target": "nucleo-f302r8"},
         "detect_code": ["0705"],
-        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
         "release_versions": ["2"]
     },
     "NUCLEO_F303K8": {
@@ -738,7 +738,7 @@
         "inherits": ["Target"],
         "progen": {"target": "nucleo-f303re"},
         "detect_code": ["0745"],
-        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
         "release_versions": ["2", "5"]
     },
     "NUCLEO_F334R8": {
@@ -750,7 +750,7 @@
         "inherits": ["Target"],
         "progen": {"target": "nucleo-f334r8"},
         "detect_code": ["0735"],
-        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
         "release_versions": ["2"]
     },
     "NUCLEO_F401RE": {
@@ -1024,7 +1024,7 @@
         "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
         "progen": {"target": "disco-f334c8"},
         "detect_code": ["0810"],
-        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
         "release_versions": ["2"]
     },
     "DISCO_F407VG": {

hal/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/objects.h

@@ -66,17 +66,6 @@ struct dac_s {
     uint32_t channel;
 };
 
-struct serial_s {
-    UARTName uart;
-    int index; // Used by irq
-    uint32_t baudrate;
-    uint32_t databits;
-    uint32_t stopbits;
-    uint32_t parity;
-    PinName pin_tx;
-    PinName pin_rx;
-};
-
 struct spi_s {
     SPIName spi;
     uint32_t bits;

hal/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/objects.h

@@ -66,17 +66,6 @@ struct dac_s {
     uint32_t channel;
 };
 
-struct serial_s {
-    UARTName uart;
-    int index; // Used by irq
-    uint32_t baudrate;
-    uint32_t databits;
-    uint32_t stopbits;
-    uint32_t parity;
-    PinName pin_tx;
-    PinName pin_rx;
-};
-
 struct spi_s {
     SPIName spi;
     uint32_t bits;

hal/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/objects.h

@@ -66,17 +66,6 @@ struct dac_s {
     uint32_t channel;
 };
 
-struct serial_s {
-    UARTName uart;
-    int index; // Used by irq
-    uint32_t baudrate;
-    uint32_t databits;
-    uint32_t stopbits;
-    uint32_t parity;
-    PinName pin_tx;
-    PinName pin_rx;
-};
-
 struct spi_s {
     SPIName spi;
     uint32_t bits;

hal/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303K8/objects.h

@@ -66,17 +66,6 @@ struct dac_s {
     uint32_t channel;
 };
 
-struct serial_s {
-    UARTName uart;
-    int index; // Used by irq
-    uint32_t baudrate;
-    uint32_t databits;
-    uint32_t stopbits;
-    uint32_t parity;
-    PinName pin_tx;
-    PinName pin_rx;
-};
-
 struct spi_s {
     SPIName spi;
     uint32_t bits;

hal/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/objects.h

@@ -66,17 +66,6 @@ struct dac_s {
     uint32_t channel;
 };
 
-struct serial_s {
-    UARTName uart;
-    int index; // Used by irq
-    uint32_t baudrate;
-    uint32_t databits;
-    uint32_t stopbits;
-    uint32_t parity;
-    PinName pin_tx;
-    PinName pin_rx;
-};
-
 struct spi_s {
     SPIName spi;
     uint32_t bits;

hal/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/objects.h

@@ -66,17 +66,6 @@ struct dac_s {
     uint32_t channel;
 };
 
-struct serial_s {
-    UARTName uart;
-    int index; // Used by irq
-    uint32_t baudrate;
-    uint32_t databits;
-    uint32_t stopbits;
-    uint32_t parity;
-    PinName pin_tx;
-    PinName pin_rx;
-};
-
 struct spi_s {
     SPIName spi;
     uint32_t bits;

hal/targets/hal/TARGET_STM/TARGET_STM32F3/common_objects.h

@@ -49,6 +49,25 @@ struct pwmout_s {
     uint8_t inverted;
 };
 
+struct serial_s {
+    UARTName uart;
+    int index; // Used by irq
+    uint32_t baudrate;
+    uint32_t databits;
+    uint32_t stopbits;
+    uint32_t parity;
+    PinName pin_tx;
+    PinName pin_rx;
+#if DEVICE_SERIAL_ASYNCH
+    uint32_t events;
+#endif
+#if DEVICE_SERIAL_FC
+    uint32_t hw_flow_ctl;
+    PinName pin_rts;
+    PinName pin_cts;
+#endif
+};
+
 #include "gpio_object.h"
 
 #ifdef __cplusplus

libraries/tests/utest/serial_asynch/serial_asynch.cpp

@@ -47,6 +47,22 @@
 #define TEST_SERIAL_ONE_TX_PIN D1   // UART2
 #define TEST_SERIAL_TWO_RX_PIN D4   // UART5
 
+#elif defined(TARGET_DISCO_F334C8)
+#define TEST_SERIAL_ONE_TX_PIN PB_10   // UART3
+#define TEST_SERIAL_TWO_RX_PIN PA_10   // UART1
+
+#elif defined(TARGET_NUCLEO_F302R8)
+#define TEST_SERIAL_ONE_TX_PIN PB_10   // UART3
+#define TEST_SERIAL_TWO_RX_PIN PA_10   // UART1
+
+#elif defined(TARGET_NUCLEO_F303RE)
+#define TEST_SERIAL_ONE_TX_PIN PB_10   // UART3
+#define TEST_SERIAL_TWO_RX_PIN PA_10   // UART1
+
+#elif defined(TARGET_NUCLEO_F334R8)
+#define TEST_SERIAL_ONE_TX_PIN PB_10   // UART3
+#define TEST_SERIAL_TWO_RX_PIN PA_10   // UART1
+
 #elif defined(TARGET_DISCO_F429ZI)
 #define TEST_SERIAL_ONE_TX_PIN PD_5   // UART2
 #define TEST_SERIAL_TWO_RX_PIN PG_9   // UART6