Merge pull request #6167 from hug-dev/cm3ds-bug-fix

CM3DS Maintenance Pull Request: Bug fixes (1/4)

features/FEATURE_LWIP/lwip-interface/lwip-eth/arch/TARGET_CM3DS_MPS2/lwipopts_conf.h

@@ -1,4 +1,4 @@
-/* Copyright (c) 2017 ARM Limited
+/* Copyright (c) 2017-2018 ARM Limited
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -22,12 +22,22 @@
 /* size is 1522 bytes to accommodate the four-byte VLAN tag. */
 #define ETH_MAX_FLEN                  1522u /* recommended size for a VLAN frame */
 
-  /* Maximum Transfer Unit
+/*
+ * Maximum Transfer Unit
  * The IEEE 802.3 specification limits the data portion of the 802.3 frame
-   * to a minimum of 46 and a maximum of 1500 bytes, this is on L3 level.
+ * to a minimum of 46 and a maximum of 1522 bytes, this is on L2 level.
  */
 #define ETH_L2_HEADER_LEN             22u
 
 #define ETH_MAX_PAYLOAD_LEN           (ETH_MAX_FLEN - ETH_L2_HEADER_LEN)
 
+/*
+ * Set this value to 2 to ensure that payload address of packet buffers is
+ * aligned on a 32 bits boundary.
+ * The padding is removed before passing the packet to the ethernet driver,
+ * hence defining this value to 2 will not prevent alignment issues inside the
+ * ethernet driver.
+ */
+#define ETH_PAD_SIZE                  0
+
 #endif /* LWIPOPTS_CONF_H */

features/FEATURE_LWIP/lwip-interface/lwip-eth/arch/TARGET_CM3DS_MPS2/mps2_emac.c

@@ -1,5 +1,5 @@
 /* mbed Microcontroller Library
- * Copyright (c) 2017 ARM Limited
+ * Copyright (c) 2017-2018 ARM Limited
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -316,16 +316,16 @@ err_t eth_arch_enetif_init(struct netif *netif)
     err_t error = ERR_OK;
     struct ethernetif *ethernetif;
 
-    ethernetif->is_enabled = 0;
-
     LWIP_ASSERT("netif != NULL", (netif != NULL));
-
     ethernetif = mem_malloc(sizeof(struct ethernetif));
+
     if (ethernetif == NULL) {
         LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\n"));
         return ERR_MEM;
     }
 
+    ethernetif->is_enabled = 0;
+
 #if LWIP_NETIF_HOSTNAME
     /* Initialize interface hostname */
     netif->hostname = HOSTNAME_STRING;

targets/TARGET_ARM_SSG/TARGET_CM3DS_MPS2/SDK/smsc9220_eth.c

@@ -1,5 +1,5 @@
 /* mbed Microcontroller Library
- * Copyright (c) 2017 ARM Limited
+ * Copyright (c) 2017-2018 ARM Limited
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -426,6 +426,53 @@ static int smsc9220_check_id(void)
     return 0;
 }
 
+/**
+ * \brief Fill the SMSC9220 TX FIFO with a number of words at an aligned
+ *        address.
+ *
+ * \param[in] data Pointer to the aligned data that should be sent.
+ * \param[in] dwords_to_write Number of data words to write.
+ */
+static void fill_tx_fifo_aligned(unsigned int *data,
+                                 unsigned int dwords_to_write)
+{
+    while (dwords_to_write > 0) {
+        SMSC9220->TX_DATA_PORT = *data;
+        data++;
+        dwords_to_write--;
+    }
+}
+
+/**
+ * \brief Fill the SMSC9220 TX FIFO with a number of words at an unaligned
+ *        address. This function ensures that loading words at that address will
+ *        not generate unaligned access which can trigger an exception to the
+ *        processor.
+ *
+ * \param[in] data Pointer to the unaligned data that should be sent.
+ * \param[in] dwords_to_write Number of data words to write.
+ */
+static void fill_tx_fifo_unaligned(uint8_t *data, unsigned int dwords_to_write)
+{
+    /*
+     * Prevent unaligned word access from data pointer, 4 bytes are copied to
+     * this variable for each word that need to be sent.
+     */
+    unsigned int tx_data_port_tmp = 0;
+    uint8_t *tx_data_port_tmp_ptr = (uint8_t *)&tx_data_port_tmp;
+
+    while (dwords_to_write > 0) {
+        /* Keep the same endianness in data than in the temp variable */
+        tx_data_port_tmp_ptr[0] = data[0];
+        tx_data_port_tmp_ptr[1] = data[1];
+        tx_data_port_tmp_ptr[2] = data[2];
+        tx_data_port_tmp_ptr[3] = data[3];
+        SMSC9220->TX_DATA_PORT = tx_data_port_tmp;
+        data += 4;
+        dwords_to_write--;
+    }
+}
+
 /*----------------------------------------------------------------------------
   Public API
  *----------------------------------------------------------------------------*/
@@ -574,7 +621,6 @@ int smsc9220_send_by_chunks(unsigned int total_packet_length, int is_new_packet,
     int is_last_segment = 0; /* signing this is the last segment of the packet to be sent */
     unsigned int txcmd_a, txcmd_b = 0;
     unsigned int dwords_to_write = 0;
-    unsigned int *pktptr = 0;
     unsigned int xmit_inf = 0;
     unsigned int tx_buffer_free_space = 0;
     volatile unsigned int xmit_stat = 0;
@@ -602,7 +648,6 @@ int smsc9220_send_by_chunks(unsigned int total_packet_length, int is_new_packet,
         is_last_segment = 1;
     }
 
-    pktptr = (unsigned int *) data;
     txcmd_a = 0;
     txcmd_b = 0;
 
@@ -616,11 +661,16 @@ int smsc9220_send_by_chunks(unsigned int total_packet_length, int is_new_packet,
     SMSC9220->TX_DATA_PORT = txcmd_b;
     dwords_to_write = (current_size + 3) >> 2;
 
-    /* PIO Copy to FIFO. Could replace this with DMA. */
+    /*
-    while(dwords_to_write > 0) {
+     * Copy to TX FIFO
-        SMSC9220->TX_DATA_PORT = *pktptr;
+     * The function to use depends on the alignment of the data pointer on a 32
-        pktptr++;
+     * bits boundary.
-        dwords_to_write--;
+     */
+    if (((unsigned int)data % sizeof(uint32_t)) == 0) {
+        /* Cast is safe because we know data is aligned */
+        fill_tx_fifo_aligned((unsigned int *)data, dwords_to_write);
+    } else {
+        fill_tx_fifo_unaligned((uint8_t *)data, dwords_to_write);
     }
 
     if (is_last_segment) {