diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/TARGET_SDT52832B/PinNames.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/TARGET_SDT52832B/PinNames.h new file mode 100644 index 0000000000..4803ac8060 --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/TARGET_SDT52832B/PinNames.h @@ -0,0 +1,248 @@ +/* + * Copyright (c) 2016 Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA + * integrated circuit in a product or a software update for such product, must reproduce + * the above copyright notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be + * used to endorse or promote products derived from this software without specific prior + * written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary or object form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define NOT_CONNECTED (int)0xFFFFFFFF +#define PORT_SHIFT 3 + +typedef enum { + p0 = 0, + p1 = 1, + p2 = 2, + p3 = 3, + p4 = 4, + p5 = 5, + p6 = 6, + p7 = 7, + p8 = 8, + p9 = 9, + p10 = 10, + p11 = 11, + p12 = 12, + p13 = 13, + p14 = 14, + p15 = 15, + p16 = 16, + p17 = 17, + p18 = 18, + p19 = 19, + p20 = 20, + p21 = 21, + p22 = 22, + p23 = 23, + p24 = 24, + p25 = 25, + p26 = 26, + p27 = 27, + p28 = 28, + p29 = 29, + p30 = 30, + p31 = 31, + + P0_0 = p0, + P0_1 = p1, + P0_2 = p2, + P0_3 = p3, + P0_4 = p4, + P0_5 = p5, + P0_6 = p6, + P0_7 = p7, + + P0_8 = p8, + P0_9 = p9, + P0_10 = p10, + P0_11 = p11, + P0_12 = p12, + P0_13 = p13, + P0_14 = p14, + P0_15 = p15, + + P0_16 = p16, + P0_17 = p17, + P0_18 = p18, + P0_19 = p19, + P0_20 = p20, + P0_21 = p21, + P0_22 = p22, + P0_23 = p23, + + P0_24 = p24, + P0_25 = p25, + P0_26 = p26, + P0_27 = p27, + P0_28 = p28, + P0_29 = p29, + P0_30 = p30, + P0_31 = p31, + + RX_PIN_NUMBER = p8, + TX_PIN_NUMBER = p6, + CTS_PIN_NUMBER = p7, + RTS_PIN_NUMBER = p5, + + // mBed interface Pins + STDIO_UART_TX = TX_PIN_NUMBER, + STDIO_UART_RX = RX_PIN_NUMBER, + STDIO_UART_CTS = CTS_PIN_NUMBER, + STDIO_UART_RTS = RTS_PIN_NUMBER, + + // Analog + A0 = P0_2, + A1 = P0_3, + A2 = P0_4, + A3 = P0_28, + + // General Pin Input Output (GPIO) + GPIO0 = P0_9, + GPIO1 = P0_10, + GPIO2 = P0_17, + GPIO3 = P0_29, + GPIO4 = NOT_CONNECTED, + GPIO5 = NOT_CONNECTED, + GPIO6 = NOT_CONNECTED, + + //Purse Width Modulation (PWM) + PWM0 = GPIO2, + PWM1 = GPIO3, + PWM2 = GPIO0, + PWM3 = GPIO1, + + // LEDs + LED0 = GPIO0, + LED1 = GPIO1, + LED2 = GPIO2, + + LED_RED = LED0, + LED_GREEN = LED1, + LED_BLUE = LED2, + + // USB bridge and SWD UART connected UART pins + USBTX = TX_PIN_NUMBER, + USBRX = RX_PIN_NUMBER, + + // UART pins + UART0_RX = NOT_CONNECTED, + UART0_TX = NOT_CONNECTED, + UART0_CTS = NOT_CONNECTED, + UART0_RTS = NOT_CONNECTED, + + UART1_RX = P0_8, + UART1_TX = P0_6, + UART1_CTS = P0_7, + UART1_RTS = P0_5, + + UART2_RX = NOT_CONNECTED, + UART2_TX = NOT_CONNECTED, + UART2_CTS = NOT_CONNECTED, + UART2_RTS = NOT_CONNECTED, + + // I2C pins + I2C0_SCL = P0_27, + I2C0_SDA = P0_26, + + I2C1_SCL = P0_31, + I2C1_SDA = P0_30, + + I2C2_SCL = NOT_CONNECTED, + I2C2_SDA = NOT_CONNECTED, + + // SPI pins + SPI0_SCK = P0_14, + SPI0_MOSI = P0_12, + SPI0_MISO = P0_13, + SPI0_SS0 = P0_11, + SPI0_SS1 = P0_15, + SPI0_SS2 = P0_16, + + SPI1_SCK = P0_25, + SPI1_MOSI = P0_23, + SPI1_MISO = P0_24, + SPI1_SS0 = P0_22, + SPI1_SS1 = P0_19, + SPI1_SS2 = P0_20, + + SPI2_SCK = NOT_CONNECTED, + SPI2_MOSI = NOT_CONNECTED, + SPI2_MISO = NOT_CONNECTED, + SPI2_SS0 = NOT_CONNECTED, + SPI2_SS1 = NOT_CONNECTED, + SPI2_SS2 = NOT_CONNECTED, + + SPI3_SCK = NOT_CONNECTED, + SPI3_MOSI = NOT_CONNECTED, + SPI3_MISO = NOT_CONNECTED, + SPI3_SS0 = NOT_CONNECTED, + SPI3_SS1 = NOT_CONNECTED, + SPI3_SS2 = NOT_CONNECTED, + + // SWD UART + SWD_TGT_TX = UART1_TX, + SWD_TGT_RX = UART1_RX, + SWD_TGT_CTS = UART1_CTS, + SWD_TGT_RTS = UART1_RTS, + + // Not connected + NC = NOT_CONNECTED + +} PinName; + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 3, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/TARGET_SDT52832B/device.h b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/TARGET_SDT52832B/device.h new file mode 100644 index 0000000000..2427e752ea --- /dev/null +++ b/targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52832/TARGET_SDT52832B/device.h @@ -0,0 +1,38 @@ +// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches. +// Check the 'features' section of the target description in 'targets.json' for more details. +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + + + + + + + + + + + + + + + + +#include "objects.h" + +#endif diff --git a/targets/targets.json b/targets/targets.json index e8a4e457f5..5048eeec87 100755 --- a/targets/targets.json +++ b/targets/targets.json @@ -3808,6 +3808,12 @@ "release_versions": ["5"], "device_name": "nRF52832_xxAA" }, + "SDT52832B": { + "inherits": ["MCU_NRF52832"], + "release_versions": ["5"], + "detect_code": ["3104"], + "device_name": "nRF52832_xxAA" + }, "UBLOX_EVA_NINA": { "inherits": ["MCU_NRF52832"], "release_versions": ["5"],