[DISCO_F429ZI] changed clock settings

Original STM32Cube F4 driver sets SYSCLK for STM32F429 to 16MHz. This
adds a 168MHz and 180MHz configuration to system_stm32f4xx.c generated
by STM32CubeMX code generator. The rtos clock configuration is changed
too. In singletest.py run everything is OK.

libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/system_stm32f4xx.c

@@ -20,7 +20,21 @@
   *                                 be called whenever the core clock is changed
   *                                 during program execution.
   *
-  *
+  * This file configures the system clock as follows:
+  *--------------------------------------------------------------------------------------
+  * System clock source                | PLL_HSE_XTAL           | PLL_HSE_XTAL           
+  *                                    | (external 8 MHz clock) | (external 8 MHz clock) 
+  *--------------------------------------------------------------------------------------
+  * SYSCLK(MHz)                        | 168                    | 180                    
+  *--------------------------------------------------------------------------------------
+  * AHBCLK (MHz)                       | 168                    | 180                    
+  *--------------------------------------------------------------------------------------
+  * APB1CLK (MHz)                      | 42                     | 45                     
+  *--------------------------------------------------------------------------------------
+  * APB2CLK (MHz)                      | 84                     | 90                     
+  *--------------------------------------------------------------------------------------
+  * USB capable (48 MHz precise clock) | YES                    | NO                     
+  *--------------------------------------------------------------------------------------
   ******************************************************************************
   * @attention
   *
@@ -65,6 +79,7 @@
 
 
 #include "stm32f4xx.h"
+#include "hal_tick.h"
 
 #if !defined  (HSE_VALUE) 
   #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */
@@ -120,6 +135,10 @@
   * @{
   */
 
+/* Select the SYSCLOCK  to start with (0=OFF, 1=ON) */
+#define USE_SYSCLOCK_168 (1) /* Use external xtal */
+#define USE_SYSCLOCK_180 (0) /* Use external clock */
+
 /**
   * @}
   */
@@ -135,7 +154,7 @@
                is no need to call the 2 first functions listed above, since SystemCoreClock
                variable is updated automatically.
   */
-  uint32_t SystemCoreClock = 16000000;
+  uint32_t SystemCoreClock = 168000000;
   __IO const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
 
 /**
@@ -200,6 +219,19 @@ void SystemInit(void)
 #else
   SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
 #endif
+
+  /* Configure the Cube driver */
+  SystemCoreClock = 16000000; // At this stage the HSI is used as system clock
+  HAL_Init();
+
+  /* Configure the System clock source, PLL Multiplier and Divider factors,
+     AHB/APBx prescalers and Flash settings */
+  SystemClock_Config();
+  SystemCoreClockUpdate();
+  
+  /* Reset the timer to avoid issues after the RAM initialization */
+  TIM_MST_RESET_ON;
+  TIM_MST_RESET_OFF;  
 }
 
 /**
@@ -508,6 +540,82 @@ void SystemInit_ExtMemCtl(void)
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
 }
 #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/** System Clock Configuration
+*/
+#if USE_SYSCLOCK_168 != 0
+/*
+ * generated code by STM32CubeMX 4.4.0 for board 32F429Discovery
+ * and SYSCLK=168MHZ
+ */
+void SystemClock_Config(void)
+{
+
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+  __PWR_CLK_ENABLE();
+
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 8;
+  RCC_OscInitStruct.PLL.PLLN = 336;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1
+                              |RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
+
+}
+
+#elif USE_SYSCLOCK_180 != 0
+/*
+ * generated code by STM32CubeMX 4.4.0 for board 32F429Discovery
+ * and SYSCLK=180MHZ
+ */
+void SystemClock_Config(void)
+{
+
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+  __PWR_CLK_ENABLE();
+
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 8;
+  RCC_OscInitStruct.PLL.PLLN = 360;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  HAL_PWREx_ActivateOverDrive();
+
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1
+                              |RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
+
+}
+#endif
+
 /**
   * @}
   */

libraries/rtos/rtx/TARGET_CORTEX_M/RTX_Conf_CM.c

@@ -153,7 +153,7 @@
 #    define OS_CLOCK       72000000
 
 #elif defined(TARGET_STM32F429ZI)
-#    define OS_CLOCK       16000000
+#    define OS_CLOCK       168000000
 
 #  else
 #    error "no target defined"