mirror of https://github.com/ARMmbed/mbed-os.git
STM32F1 DISCO : PeripheralPins.c and PinNames.h files alignment
jeromecoutant
parent
b22c0d1bc1
commit
1e0ae6de14
|
|
@ -40,6 +40,10 @@ typedef enum {
|
|||
ADC_1 = (int)ADC1_BASE
|
||||
} ADCName;
|
||||
|
||||
typedef enum {
|
||||
DAC_1 = (int)DAC_BASE
|
||||
} DACName;
|
||||
|
||||
typedef enum {
|
||||
UART_1 = (int)USART1_BASE,
|
||||
UART_2 = (int)USART2_BASE,
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2014, STMicroelectronics
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -29,55 +29,77 @@
|
|||
*/
|
||||
|
||||
#include "PeripheralPins.h"
|
||||
#include "mbed_toolchain.h"
|
||||
|
||||
//==============================================================================
|
||||
// Notes
|
||||
//
|
||||
// - The pins mentionned Px_y_ALTz are alternative possibilities which use other
|
||||
// HW peripheral instances. You can use them the same way as any other "normal"
|
||||
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
|
||||
// pinout image on mbed.org.
|
||||
//
|
||||
// - The pins which are connected to other components present on the board have
|
||||
// the comment "Connected to xxx". The pin function may not work properly in this
|
||||
// case. These pins may not be displayed on the board pinout image on mbed.org.
|
||||
// Please read the board reference manual and schematic for more information.
|
||||
//
|
||||
// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
|
||||
// See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
|
||||
//
|
||||
//==============================================================================
|
||||
|
||||
// =====
|
||||
// Note: Commented lines are alternative possibilities which are not used per default.
|
||||
// If you change them, you will have also to modify the corresponding xxx_api.c file
|
||||
// for pwmout, analogin, analogout, ...
|
||||
// =====
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
|
||||
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
|
||||
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
|
||||
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
|
||||
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
|
||||
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
|
||||
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
|
||||
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
|
||||
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
|
||||
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
|
||||
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10
|
||||
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11
|
||||
{PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12
|
||||
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13
|
||||
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14
|
||||
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 // Connected to SYS_WKUP
|
||||
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
{PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_ADC_Internal[] = {
|
||||
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC_IN16
|
||||
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC_IN17
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
|
||||
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
|
||||
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** DAC ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||
{PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
||||
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
||||
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_I2C_SCL[] = {
|
||||
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
||||
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
||||
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** PWM ***
|
||||
|
|
@ -122,50 +144,68 @@ const PinMap PinMap_PWM[] = {
|
|||
|
||||
//*** SERIAL ***
|
||||
|
||||
const PinMap PinMap_UART_TX[] = {
|
||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_RX[] = {
|
||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // Connected to SYS_WKUP
|
||||
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** No CAN ***
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2014, STMicroelectronics
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -27,6 +27,7 @@
|
|||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
|
|
@ -173,6 +174,24 @@ typedef enum {
|
|||
SPI_CS = PB_12,
|
||||
PWM_OUT = PB_8,
|
||||
|
||||
/**** No USB pins ***/
|
||||
|
||||
/**** No ETHERNET pins ***/
|
||||
|
||||
/**** OSCILLATOR pins ****/
|
||||
RCC_OSC32_IN = PC_14,
|
||||
RCC_OSC32_OUT = PC_15,
|
||||
RCC_OSC_IN = PD_0,
|
||||
RCC_OSC_OUT = PD_1,
|
||||
|
||||
/**** DEBUG pins ****/
|
||||
SYS_JTCK_SWCLK = PA_14,
|
||||
SYS_JTDI = PA_15,
|
||||
SYS_JTDO_TRACESWO = PB_3,
|
||||
SYS_JTMS_SWDIO = PA_13,
|
||||
SYS_NJTRST = PB_4,
|
||||
SYS_WKUP = PA_0,
|
||||
|
||||
// Not connected
|
||||
NC = (int)0xFFFFFFFF
|
||||
} PinName;
|
||||
|
|
|
|||
Loading…
Reference in New Issue