mirror of https://github.com/ARMmbed/mbed-os.git
STM32F1 code cleaning
jeromecoutant
parent
7ac968b7b2
commit
126a9c9693
|
|
@ -1,78 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2014, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
#ifndef MBED_PERIPHERALNAMES_H
|
||||
#define MBED_PERIPHERALNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
ADC_1 = (int)ADC1_BASE
|
||||
} ADCName;
|
||||
|
||||
typedef enum {
|
||||
DAC_1 = (int)DAC_BASE
|
||||
} DACName;
|
||||
|
||||
typedef enum {
|
||||
UART_1 = (int)USART1_BASE,
|
||||
UART_2 = (int)USART2_BASE,
|
||||
UART_3 = (int)USART3_BASE
|
||||
} UARTName;
|
||||
|
||||
#define DEVICE_SPI_COUNT 2
|
||||
typedef enum {
|
||||
SPI_1 = (int)SPI1_BASE,
|
||||
SPI_2 = (int)SPI2_BASE
|
||||
} SPIName;
|
||||
|
||||
typedef enum {
|
||||
I2C_1 = (int)I2C1_BASE,
|
||||
I2C_2 = (int)I2C2_BASE
|
||||
} I2CName;
|
||||
|
||||
typedef enum {
|
||||
PWM_1 = (int)TIM1_BASE,
|
||||
PWM_2 = (int)TIM2_BASE,
|
||||
PWM_3 = (int)TIM3_BASE,
|
||||
PWM_4 = (int)TIM4_BASE,
|
||||
PWM_15 = (int)TIM15_BASE,
|
||||
PWM_16 = (int)TIM16_BASE,
|
||||
PWM_17 = (int)TIM17_BASE
|
||||
} PWMName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1,210 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#include "PeripheralPins.h"
|
||||
#include "mbed_toolchain.h"
|
||||
|
||||
//==============================================================================
|
||||
// Notes
|
||||
//
|
||||
// - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||
// HW peripheral instances. You can use them the same way as any other "normal"
|
||||
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
|
||||
// pinout image on mbed.org.
|
||||
//
|
||||
// - The pins which are connected to other components present on the board have
|
||||
// the comment "Connected to xxx". The pin function may not work properly in this
|
||||
// case. These pins may not be displayed on the board pinout image on mbed.org.
|
||||
// Please read the board reference manual and schematic for more information.
|
||||
//
|
||||
// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
|
||||
// See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
|
||||
//
|
||||
//==============================================================================
|
||||
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 // Connected to SYS_WKUP
|
||||
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
{PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
|
||||
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
|
||||
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** DAC ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||
{PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
||||
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
|
||||
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** PWM ***
|
||||
|
||||
// TIM4 cannot be used because already used by the us_ticker
|
||||
MBED_WEAK const PinMap PinMap_PWM[] = {
|
||||
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM2_CH1 // Connected to SYS_WKUP
|
||||
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM2_CH2 - Default
|
||||
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM2_CH3 - Default (warning: not connected on D1 per default)
|
||||
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM2_CH4 - Default (warning: not connected on D0 per default)
|
||||
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM3_CH1 - Default
|
||||
{PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM3_CH2 - Default
|
||||
// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 1, 1)}, // TIM1_CH1N - GPIO_PartialRemap_TIM1
|
||||
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM1_CH1 - Default
|
||||
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM1_CH2 - Default
|
||||
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM1_CH3 - Default
|
||||
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM1_CH4 - Default
|
||||
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 1, 0)}, // TIM2_CH1_ETR - GPIO_FullRemap_TIM2
|
||||
|
||||
{PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM3_CH3 - Default
|
||||
// {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 2, 1)}, // TIM1_CH2N - GPIO_PartialRemap_TIM1
|
||||
{PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM3_CH4 - Default
|
||||
// {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 6, 3, 1)}, // TIM1_CH3N - GPIO_PartialRemap_TIM1
|
||||
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 2, 0)}, // TIM2_CH2 - GPIO_FullRemap_TIM2
|
||||
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 1, 0)}, // TIM3_CH1 - GPIO_PartialRemap_TIM3
|
||||
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 7, 2, 0)}, // TIM3_CH2 - GPIO_PartialRemap_TIM3
|
||||
// {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 0)}, // TIM4_CH1 - Default (used by ticker)
|
||||
// {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 0)}, // TIM4_CH2 - Default (used by ticker)
|
||||
// {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 0)}, // TIM4_CH3 - Default (used by ticker)
|
||||
// {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 4, 0)}, // TIM4_CH4 - Default (used by ticker)
|
||||
{PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 3, 0)}, // TIM2_CH3 - GPIO_FullRemap_TIM2
|
||||
{PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 8, 4, 0)}, // TIM2_CH4 - GPIO_FullRemap_TIM2
|
||||
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 1, 1)}, // TIM1_CH1N - Default
|
||||
{PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 2, 1)}, // TIM1_CH2N - Default
|
||||
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 0, 3, 1)}, // TIM1_CH3N - Default
|
||||
|
||||
{PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 1, 0)}, // TIM3_CH1 - GPIO_FullRemap_TIM3
|
||||
{PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 2, 0)}, // TIM3_CH2 - GPIO_FullRemap_TIM3
|
||||
{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 3, 0)}, // TIM3_CH3 - GPIO_FullRemap_TIM3
|
||||
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, 9, 4, 0)}, // TIM3_CH4 - GPIO_FullRemap_TIM3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** SERIAL ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
|
||||
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
|
||||
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // Connected to SYS_WKUP
|
||||
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
|
||||
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
|
||||
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
|
@ -1,199 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "PinNamesTypes.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PA_0 = 0x00,
|
||||
PA_1 = 0x01,
|
||||
PA_2 = 0x02,
|
||||
PA_3 = 0x03,
|
||||
PA_4 = 0x04,
|
||||
PA_5 = 0x05,
|
||||
PA_6 = 0x06,
|
||||
PA_7 = 0x07,
|
||||
PA_8 = 0x08,
|
||||
PA_9 = 0x09,
|
||||
PA_10 = 0x0A,
|
||||
PA_11 = 0x0B,
|
||||
PA_12 = 0x0C,
|
||||
PA_13 = 0x0D,
|
||||
PA_14 = 0x0E,
|
||||
PA_15 = 0x0F,
|
||||
|
||||
PB_0 = 0x10,
|
||||
PB_1 = 0x11,
|
||||
PB_2 = 0x12,
|
||||
PB_3 = 0x13,
|
||||
PB_4 = 0x14,
|
||||
PB_5 = 0x15,
|
||||
PB_6 = 0x16,
|
||||
PB_7 = 0x17,
|
||||
PB_8 = 0x18,
|
||||
PB_9 = 0x19,
|
||||
PB_10 = 0x1A,
|
||||
PB_11 = 0x1B,
|
||||
PB_12 = 0x1C,
|
||||
PB_13 = 0x1D,
|
||||
PB_14 = 0x1E,
|
||||
PB_15 = 0x1F,
|
||||
|
||||
PC_0 = 0x20,
|
||||
PC_1 = 0x21,
|
||||
PC_2 = 0x22,
|
||||
PC_3 = 0x23,
|
||||
PC_4 = 0x24,
|
||||
PC_5 = 0x25,
|
||||
PC_6 = 0x26,
|
||||
PC_7 = 0x27,
|
||||
PC_8 = 0x28,
|
||||
PC_9 = 0x29,
|
||||
PC_10 = 0x2A,
|
||||
PC_11 = 0x2B,
|
||||
PC_12 = 0x2C,
|
||||
PC_13 = 0x2D,
|
||||
PC_14 = 0x2E,
|
||||
PC_15 = 0x2F,
|
||||
|
||||
PD_0 = 0x30,
|
||||
PD_1 = 0x31,
|
||||
PD_2 = 0x32,
|
||||
|
||||
// ADC internal channels
|
||||
ADC_TEMP = 0xF0,
|
||||
ADC_VREF = 0xF1,
|
||||
|
||||
// Arduino connector namings
|
||||
PA0 = PA_0,
|
||||
PA1 = PA_1,
|
||||
PA2 = PA_2,
|
||||
PA3 = PA_3,
|
||||
PA4 = PA_4,
|
||||
PA5 = PA_5,
|
||||
PA6 = PA_6,
|
||||
PA7 = PA_7,
|
||||
PA8 = PA_8,
|
||||
PA9 = PA_9,
|
||||
PA10 = PA_10,
|
||||
PA11 = PA_11,
|
||||
PA12 = PA_12,
|
||||
PA13 = PA_13,
|
||||
PA14 = PA_14,
|
||||
PA15 = PA_15,
|
||||
|
||||
PC4 = PC_4,
|
||||
PC5 = PC_5,
|
||||
PC6 = PC_6,
|
||||
PC7 = PC_7,
|
||||
PC8 = PC_8,
|
||||
PC9 = PC_9,
|
||||
PC10 = PC_10,
|
||||
PC11 = PC_13,
|
||||
PC12 = PC_12,
|
||||
|
||||
PD2 = PD_2,
|
||||
|
||||
PB1 = PB_1,
|
||||
PB2 = PB_2,
|
||||
PB3 = PB_3,
|
||||
PB4 = PB_4,
|
||||
PB5 = PB_5,
|
||||
PB6 = PB_6,
|
||||
PB7 = PB_7,
|
||||
PB8 = PB_8,
|
||||
PB9 = PB_9,
|
||||
PB10 = PB_10,
|
||||
PB11 = PB_11,
|
||||
PB12 = PB_12,
|
||||
PB13 = PB_13,
|
||||
PB14 = PB_14,
|
||||
PB15 = PB_15,
|
||||
|
||||
// STDIO for console print
|
||||
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
|
||||
STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
|
||||
#else
|
||||
STDIO_UART_TX = PA_2,
|
||||
#endif
|
||||
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
|
||||
STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
|
||||
#else
|
||||
STDIO_UART_RX = PA_3,
|
||||
#endif
|
||||
|
||||
// Generic signals namings
|
||||
LED1 = PC_9,
|
||||
LED2 = PC_8,
|
||||
LED3 = PC_9,
|
||||
LED4 = PC_8,
|
||||
USER_BUTTON = PA_0,
|
||||
// Standardized button names
|
||||
BUTTON1 = USER_BUTTON,
|
||||
USBTX = STDIO_UART_TX,
|
||||
USBRX = STDIO_UART_RX,
|
||||
I2C_SCL = PB_6,
|
||||
I2C_SDA = PB_7,
|
||||
SPI_MOSI = PB_15,
|
||||
SPI_MISO = PB_14,
|
||||
SPI_SCK = PB_13,
|
||||
SPI_CS = PB_12,
|
||||
PWM_OUT = PB_8,
|
||||
|
||||
/**** OSCILLATOR pins ****/
|
||||
RCC_OSC32_IN = PC_14,
|
||||
RCC_OSC32_OUT = PC_15,
|
||||
RCC_OSC_IN = PD_0,
|
||||
RCC_OSC_OUT = PD_1,
|
||||
|
||||
/**** DEBUG pins ****/
|
||||
SYS_JTCK_SWCLK = PA_14,
|
||||
SYS_JTDI = PA_15,
|
||||
SYS_JTDO_TRACESWO = PB_3,
|
||||
SYS_JTMS_SWDIO = PA_13,
|
||||
SYS_NJTRST = PB_4,
|
||||
SYS_WKUP = PA_0,
|
||||
|
||||
// Not connected
|
||||
NC = (int)0xFFFFFFFF
|
||||
} PinName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1,282 +0,0 @@
|
|||
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V4.1.0
|
||||
;* Date : 29-April-2016
|
||||
;* Description : STM32F103xB Devices vector table for MDK-ARM_MICRO toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* COPYRIGHT(c) 2016 STMicroelectronics
|
||||
;*
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
IMPORT |Image$$ARM_LIB_STACK$$ZI$$Limit|
|
||||
|
||||
__Vectors DCD |Image$$ARM_LIB_STACK$$ZI$$Limit| ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI-CEC
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
CEC_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -1,76 +0,0 @@
|
|||
#! armcc -E
|
||||
; Scatter-Loading Description File
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Copyright (c) 2016, STMicroelectronics
|
||||
; All rights reserved.
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
; modification, are permitted provided that the following conditions are met:
|
||||
;
|
||||
; 1. Redistributions of source code must retain the above copyright notice,
|
||||
; this list of conditions and the following disclaimer.
|
||||
; 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
; this list of conditions and the following disclaimer in the documentation
|
||||
; and/or other materials provided with the distribution.
|
||||
; 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
; may be used to endorse or promote products derived from this software
|
||||
; without specific prior written permission.
|
||||
;
|
||||
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
#if !defined(MBED_APP_START)
|
||||
#define MBED_APP_START 0x08000000
|
||||
#endif
|
||||
|
||||
; 128K FLASH (0x20000)
|
||||
#if !defined(MBED_APP_SIZE)
|
||||
#define MBED_APP_SIZE 0x20000
|
||||
#endif
|
||||
|
||||
; 320KB SRAM (0x50000)
|
||||
#if !defined(MBED_RAM_START)
|
||||
#define MBED_RAM_START 0x20000000
|
||||
#endif
|
||||
|
||||
#if !defined(MBED_RAM_SIZE)
|
||||
#define MBED_RAM_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
|
||||
#if !defined(MBED_BOOT_STACK_SIZE)
|
||||
#define MBED_BOOT_STACK_SIZE 0x400
|
||||
#endif
|
||||
|
||||
; 77 vectors (16 core + 61 peripheral) * 4 bytes = 308 bytes to reserve (0x134) 8-byte aligned = 0x138
|
||||
#define VECTOR_SIZE 0x138
|
||||
|
||||
#define RAM_FIXED_SIZE (MBED_BOOT_STACK_SIZE+VECTOR_SIZE)
|
||||
|
||||
LR_IROM1 MBED_APP_START MBED_APP_SIZE { ; load region size_region
|
||||
|
||||
ER_IROM1 MBED_APP_START MBED_APP_SIZE { ; load address = execution address
|
||||
*.o (RESET, +First)
|
||||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
|
||||
RW_IRAM1 (MBED_RAM_START+VECTOR_SIZE) (MBED_RAM_SIZE-VECTOR_SIZE) { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
|
||||
ARM_LIB_HEAP AlignExpr(+0, 16) EMPTY (MBED_RAM_SIZE-RAM_FIXED_SIZE+MBED_RAM_START-AlignExpr(ImageLimit(RW_IRAM1), 16)) {
|
||||
}
|
||||
|
||||
ARM_LIB_STACK (MBED_RAM_START+MBED_RAM_SIZE) EMPTY -MBED_BOOT_STACK_SIZE { ; stack
|
||||
}
|
||||
}
|
||||
|
|
@ -1,282 +0,0 @@
|
|||
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f100xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V4.1.0
|
||||
;* Date : 29-April-2016
|
||||
;* Description : STM32F100xB Devices vector table for MDK-ARM_STD toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* COPYRIGHT(c) 2016 STMicroelectronics
|
||||
;*
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
IMPORT |Image$$ARM_LIB_STACK$$ZI$$Limit|
|
||||
|
||||
__Vectors DCD |Image$$ARM_LIB_STACK$$ZI$$Limit| ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI-CEC
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
CEC_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -1,53 +0,0 @@
|
|||
#! armcc -E
|
||||
; Scatter-Loading Description File
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Copyright (c) 2016, STMicroelectronics
|
||||
; All rights reserved.
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
; modification, are permitted provided that the following conditions are met:
|
||||
;
|
||||
; 1. Redistributions of source code must retain the above copyright notice,
|
||||
; this list of conditions and the following disclaimer.
|
||||
; 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
; this list of conditions and the following disclaimer in the documentation
|
||||
; and/or other materials provided with the distribution.
|
||||
; 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
; may be used to endorse or promote products derived from this software
|
||||
; without specific prior written permission.
|
||||
;
|
||||
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
#if !defined(MBED_BOOT_STACK_SIZE)
|
||||
#define MBED_BOOT_STACK_SIZE 0x400
|
||||
#endif
|
||||
|
||||
#define Stack_Size MBED_BOOT_STACK_SIZE
|
||||
|
||||
LR_IROM1 0x08000000 0x20000 { ; load region size_region (128K)
|
||||
|
||||
ER_IROM1 0x08000000 0x20000 { ; load address = execution address
|
||||
*.o (RESET, +First)
|
||||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
|
||||
; 77 vectors (16 core + 61 peripheral) * 4 bytes = 308 bytes to reserve (0x134) 8-byte aligned = 0x138
|
||||
RW_IRAM1 (0x20000000+0x138) (0x2000-0x138-Stack_Size) { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
|
||||
ARM_LIB_STACK (0x20000000+0x2000) EMPTY -Stack_Size { ; stack
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1,163 +0,0 @@
|
|||
/* Linker script for STM32F407 */
|
||||
|
||||
#if !defined(MBED_BOOT_STACK_SIZE)
|
||||
#define MBED_BOOT_STACK_SIZE 0x400
|
||||
#endif
|
||||
|
||||
STACK_SIZE = MBED_BOOT_STACK_SIZE;
|
||||
|
||||
/* Linker script to configure memory regions. */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128k
|
||||
RAM (rwx) : ORIGIN = 0x200001D0, LENGTH = 8K - 0x1D0
|
||||
}
|
||||
|
||||
/* Linker script to place sections and symbol values. Should be used together
|
||||
* with other linker script that defines memory regions FLASH and RAM.
|
||||
* It references following symbols, which must be defined in code:
|
||||
* Reset_Handler : Entry of reset handler
|
||||
*
|
||||
* It defines following symbols, which code can use without definition:
|
||||
* __exidx_start
|
||||
* __exidx_end
|
||||
* __etext
|
||||
* __data_start__
|
||||
* __preinit_array_start
|
||||
* __preinit_array_end
|
||||
* __init_array_start
|
||||
* __init_array_end
|
||||
* __fini_array_start
|
||||
* __fini_array_end
|
||||
* __data_end__
|
||||
* __bss_start__
|
||||
* __bss_end__
|
||||
* __end__
|
||||
* end
|
||||
* __HeapLimit
|
||||
* __StackLimit
|
||||
* __StackTop
|
||||
* __stack
|
||||
*/
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
KEEP(*(.isr_vector))
|
||||
*(.text*)
|
||||
|
||||
KEEP(*(.init))
|
||||
KEEP(*(.fini))
|
||||
|
||||
/* .ctors */
|
||||
*crtbegin.o(.ctors)
|
||||
*crtbegin?.o(.ctors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
||||
*(SORT(.ctors.*))
|
||||
*(.ctors)
|
||||
|
||||
/* .dtors */
|
||||
*crtbegin.o(.dtors)
|
||||
*crtbegin?.o(.dtors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
||||
*(SORT(.dtors.*))
|
||||
*(.dtors)
|
||||
|
||||
*(.rodata*)
|
||||
|
||||
KEEP(*(.eh_frame*))
|
||||
} > FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} > FLASH
|
||||
|
||||
__exidx_start = .;
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
} > FLASH
|
||||
__exidx_end = .;
|
||||
|
||||
__etext = .;
|
||||
_sidata = .;
|
||||
|
||||
.data : AT (__etext)
|
||||
{
|
||||
__data_start__ = .;
|
||||
_sdata = .;
|
||||
*(vtable)
|
||||
*(.data*)
|
||||
|
||||
. = ALIGN(8);
|
||||
/* preinit data */
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP(*(.preinit_array))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
|
||||
. = ALIGN(8);
|
||||
/* init data */
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP(*(SORT(.init_array.*)))
|
||||
KEEP(*(.init_array))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
|
||||
|
||||
. = ALIGN(8);
|
||||
/* finit data */
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP(*(SORT(.fini_array.*)))
|
||||
KEEP(*(.fini_array))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
|
||||
KEEP(*(.jcr*))
|
||||
. = ALIGN(8);
|
||||
/* All data end */
|
||||
__data_end__ = .;
|
||||
_edata = .;
|
||||
|
||||
} > RAM
|
||||
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
__bss_start__ = .;
|
||||
_sbss = .;
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(8);
|
||||
__bss_end__ = .;
|
||||
_ebss = .;
|
||||
} > RAM
|
||||
|
||||
.heap (COPY):
|
||||
{
|
||||
__end__ = .;
|
||||
end = __end__;
|
||||
*(.heap*)
|
||||
. = ORIGIN(RAM) + LENGTH(RAM) - STACK_SIZE;
|
||||
__HeapLimit = .;
|
||||
} > RAM
|
||||
|
||||
/* .stack_dummy section doesn't contains any symbols. It is only
|
||||
* used for linker to calculate size of stack sections, and assign
|
||||
* values to stack symbols later */
|
||||
.stack_dummy (COPY):
|
||||
{
|
||||
*(.stack*)
|
||||
} > RAM
|
||||
|
||||
/* Set stack top to end of RAM, and stack limit move down by
|
||||
* size of stack_dummy section */
|
||||
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
|
||||
_estack = __StackTop;
|
||||
__StackLimit = __StackTop - STACK_SIZE;
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
/* Check if data + heap + stack exceeds RAM limit */
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
|
||||
}
|
||||
|
||||
|
|
@ -1,409 +0,0 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2016 STMicroelectronics ************************
|
||||
* @file startup_stm32f100xb.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.1.0
|
||||
* @date 29-April-2016
|
||||
* @brief STM32F100xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
/* bl __libc_init_array */
|
||||
/* Call the application's entry point.*/
|
||||
/* bl main */
|
||||
bl _start
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word CEC_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x01CC. This is for boot in RAM mode for
|
||||
STM32F10xB Value Line devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
|
|
@ -1,40 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2016, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef MBED_CMSIS_NVIC_H
|
||||
#define MBED_CMSIS_NVIC_H
|
||||
|
||||
// CORE: 16 vectors (= 64 bytes from 0x00 to 0x3F)
|
||||
// MCU Peripherals: 61 vectors (= 244 bytes from 0x40 to 0x134)
|
||||
// Total: 308 bytes to be reserved in RAM (see scatter file)
|
||||
#define NVIC_NUM_VECTORS (16 + 61)
|
||||
#define NVIC_RAM_VECTOR_ADDRESS 0x20000000 // Vectors positioned at start of RAM
|
||||
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,238 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32F1xx device used in the target application
|
||||
* - To use or not the peripheral’s drivers in application code(i.e.
|
||||
* code will be based on direct access to peripheral’s registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f1xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __STM32F1XX_H
|
||||
#define __STM32F1XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32 Family
|
||||
*/
|
||||
#if !defined (STM32F1)
|
||||
#define STM32F1
|
||||
#endif /* STM32F1 */
|
||||
|
||||
/* Uncomment the line below according to the target STM32L device used in your
|
||||
application
|
||||
*/
|
||||
|
||||
#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
|
||||
!defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
|
||||
!defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
|
||||
#define STM32F100xB /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
|
||||
/* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
|
||||
/* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
|
||||
/* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
|
||||
/* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */
|
||||
/* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
|
||||
/* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
|
||||
/* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
|
||||
/* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
|
||||
/* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
|
||||
/* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
|
||||
/* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
|
||||
/* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
|
||||
/* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
#define USE_HAL_DRIVER
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number V4.2.0
|
||||
*/
|
||||
#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */
|
||||
#define __STM32F1_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
|
||||
#define __STM32F1_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
|
||||
#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
|
||||
#define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
|
||||
|(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
|
||||
|(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
|
||||
|(__STM32F1_CMSIS_VERSION_RC))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F100xB)
|
||||
#include "stm32f100xb.h"
|
||||
#elif defined(STM32F100xE)
|
||||
#include "stm32f100xe.h"
|
||||
#elif defined(STM32F101x6)
|
||||
#include "stm32f101x6.h"
|
||||
#elif defined(STM32F101xB)
|
||||
#include "stm32f101xb.h"
|
||||
#elif defined(STM32F101xE)
|
||||
#include "stm32f101xe.h"
|
||||
#elif defined(STM32F101xG)
|
||||
#include "stm32f101xg.h"
|
||||
#elif defined(STM32F102x6)
|
||||
#include "stm32f102x6.h"
|
||||
#elif defined(STM32F102xB)
|
||||
#include "stm32f102xb.h"
|
||||
#elif defined(STM32F103x6)
|
||||
#include "stm32f103x6.h"
|
||||
#elif defined(STM32F103xB)
|
||||
#include "stm32f103xb.h"
|
||||
#elif defined(STM32F103xE)
|
||||
#include "stm32f103xe.h"
|
||||
#elif defined(STM32F103xG)
|
||||
#include "stm32f103xg.h"
|
||||
#elif defined(STM32F105xC)
|
||||
#include "stm32f105xc.h"
|
||||
#elif defined(STM32F107xC)
|
||||
#include "stm32f107xc.h"
|
||||
#else
|
||||
#error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RESET = 0,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DISABLE = 0,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum
|
||||
{
|
||||
ERROR = 0,
|
||||
SUCCESS = !ERROR
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macros
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32f1xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* __STM32F1xx_H */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,231 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
* Copyright (c) 2006-2017 ARM Limited
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||
* you may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* This file configures the system clock as follows:
|
||||
*-----------------------------------------------------------------------------
|
||||
* System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
|
||||
* | (external 8 MHz clock) | (internal 8 MHz)
|
||||
* | 2- PLL_HSE_XTAL |
|
||||
* | (external 8 MHz xtal) |
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK(MHz) | 24 | 24
|
||||
*-----------------------------------------------------------------------------
|
||||
* AHBCLK (MHz) | 24 | 24
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB1CLK (MHz) | 24 | 24
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB2CLK (MHz) | 24 | 24
|
||||
*-----------------------------------------------------------------------------
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "stm32f1xx.h"
|
||||
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
|
||||
|
||||
/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
|
||||
#define USE_PLL_HSE_EXTC (0) /* Use external clock */
|
||||
#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
|
||||
|
||||
|
||||
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
|
||||
#endif
|
||||
|
||||
uint8_t SetSysClock_PLL_HSI(void);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemCoreClock variable.
|
||||
* @note This function should be used only after reset.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
/* Reset the RCC clock configuration to the default reset state(for debug purpose) */
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= 0x00000001U;
|
||||
|
||||
/* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
|
||||
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||
RCC->CFGR &= 0xF8FF0000U;
|
||||
#else
|
||||
RCC->CFGR &= 0xF0FF0000U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
/* Reset HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= 0xFEF6FFFFU;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= 0xFFFBFFFFU;
|
||||
|
||||
/* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
|
||||
RCC->CFGR &= 0xFF80FFFFU;
|
||||
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
/* Reset PLL2ON and PLL3ON bits */
|
||||
RCC->CR &= 0xEBFFFFFFU;
|
||||
|
||||
/* Disable all interrupts and clear pending bits */
|
||||
RCC->CIR = 0x00FF0000U;
|
||||
|
||||
/* Reset CFGR2 register */
|
||||
RCC->CFGR2 = 0x00000000U;
|
||||
#elif defined(STM32F100xB) || defined(STM32F100xE)
|
||||
/* Disable all interrupts and clear pending bits */
|
||||
RCC->CIR = 0x009F0000U;
|
||||
|
||||
/* Reset CFGR2 register */
|
||||
RCC->CFGR2 = 0x00000000U;
|
||||
#else
|
||||
/* Disable all interrupts and clear pending bits */
|
||||
RCC->CIR = 0x009F0000U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif
|
||||
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SetSysClock(void)
|
||||
{
|
||||
/* 1- Try to start with HSE and external clock */
|
||||
#if USE_PLL_HSE_EXTC != 0
|
||||
if (SetSysClock_PLL_HSE(1) == 0)
|
||||
#endif
|
||||
{
|
||||
/* 2- If fail try to start with HSE and external xtal */
|
||||
#if USE_PLL_HSE_XTAL != 0
|
||||
if (SetSysClock_PLL_HSE(0) == 0)
|
||||
#endif
|
||||
{
|
||||
/* 3- If fail start with HSI clock */
|
||||
if (SetSysClock_PLL_HSI() == 0) {
|
||||
while(1) {
|
||||
// [TODO] Put something here to tell the user that a problem occured...
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1); // 24 MHz
|
||||
}
|
||||
|
||||
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* Enable HSE oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
if (bypass == 0) {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
|
||||
} else {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
|
||||
}
|
||||
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; // 24 MHz (4 MHz * 6)
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 24 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 24 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 24 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 24 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSI(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* Enable HSI oscillator and activate PLL with HSI as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; // 24 MHz (8 MHz/2 * 6)
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 24 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 24 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 24 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 24 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 8 MHz
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
|
||||
|
|
@ -1,118 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f10x.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f10x_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef __SYSTEM_STM32F10X_H
|
||||
#define __SYSTEM_STM32F10X_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32F10x_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
|
||||
extern const uint8_t AHBPrescTable[16U]; /*!< AHB prescalers table values */
|
||||
extern const uint8_t APBPrescTable[8U]; /*!< APB prescalers table values */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
extern void SetSysClock(void);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__SYSTEM_STM32F10X_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,45 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
* Copyright (c) 2006-2018 ARM Limited
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||
* you may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
#ifndef __US_TICKER_DATA_H
|
||||
#define __US_TICKER_DATA_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "stm32f1xx.h"
|
||||
#include "stm32f1xx_ll_tim.h"
|
||||
#include "cmsis_nvic.h"
|
||||
|
||||
#define TIM_MST TIM4
|
||||
#define TIM_MST_IRQ TIM4_IRQn
|
||||
#define TIM_MST_RCC __HAL_RCC_TIM4_CLK_ENABLE()
|
||||
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM4()
|
||||
|
||||
#define TIM_MST_RESET_ON __HAL_RCC_TIM4_FORCE_RESET()
|
||||
#define TIM_MST_RESET_OFF __HAL_RCC_TIM4_RELEASE_RESET()
|
||||
|
||||
#define TIM_MST_BIT_WIDTH 16 // 16 or 32
|
||||
|
||||
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __US_TICKER_DATA_H
|
||||
|
||||
|
|
@ -1,63 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2016, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
#ifndef MBED_OBJECTS_H
|
||||
#define MBED_OBJECTS_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "PortNames.h"
|
||||
#include "PeripheralNames.h"
|
||||
#include "PinNames.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
struct gpio_irq_s {
|
||||
IRQn_Type irq_n;
|
||||
uint32_t irq_index;
|
||||
uint32_t event;
|
||||
PinName pin;
|
||||
};
|
||||
|
||||
struct port_s {
|
||||
PortName port;
|
||||
uint32_t mask;
|
||||
PinDirection direction;
|
||||
__IO uint32_t *reg_in;
|
||||
__IO uint32_t *reg_out;
|
||||
};
|
||||
|
||||
#include "common_objects.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -46,7 +46,6 @@ class CoIDE(Exporter):
|
|||
'NUCLEO_F411RE',
|
||||
'NUCLEO_F446RE',
|
||||
'DISCO_L053C8',
|
||||
'DISCO_F100RB',
|
||||
'DISCO_F303VC',
|
||||
'DISCO_F334C8',
|
||||
'DISCO_F401VC',
|
||||
|
|
|
|||
|
|
@ -1,168 +0,0 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<Project version="2G - 1.7.5" name="{{name}}">
|
||||
<Target name="Release" isCurrent="1">
|
||||
<Device manufacturerId="9" manufacturerName="ST" chipId="257" chipName="STM32F100RB" boardId="" boardName=""/>
|
||||
<BuildOption>
|
||||
<Compile>
|
||||
<Option name="OptimizationLevel" value="4"/>
|
||||
<Option name="UseFPU" value="0"/>
|
||||
<Option name="UserEditCompiler" value="-fno-common; -fmessage-length=0; -Wall; -fno-strict-aliasing; -fno-rtti; -fno-exceptions; -ffunction-sections; -fdata-sections; -std=gnu++14"/>
|
||||
<Option name="FPU" value="1"/>
|
||||
<Option name="SupportCPlusplus" value="1"/>
|
||||
<Includepaths>
|
||||
{% for path in include_paths %} <Includepath path="{{path}}"/> {% endfor %}
|
||||
</Includepaths>
|
||||
<DefinedSymbols>
|
||||
{% for s in symbols %} <Define name="{{s}}"/> {% endfor %}
|
||||
</DefinedSymbols>
|
||||
</Compile>
|
||||
<Link useDefault="0">
|
||||
<Option name="DiscardUnusedSection" value="1"/>
|
||||
<Option name="UserEditLinkder" value=""/>
|
||||
<Option name="UseMemoryLayout" value="0"/>
|
||||
<Option name="LTO" value="0"/>
|
||||
<Option name="IsNewStartupCode" value="1"/>
|
||||
<Option name="Library" value="Not use C Library"/>
|
||||
<Option name="nostartfiles" value="0"/>
|
||||
<Option name="UserEditLinker" value="-Wl,--wrap,main; --specs=nano.specs; -u _printf_float; -u _scanf_float; {% for file in object_files %}
|
||||
${project.path}/{{file}}; {% endfor %} {% for p in library_paths %}-L${project.path}/{{p}}; {% endfor %}"/>
|
||||
<LinkedLibraries>
|
||||
{% for lib in libraries %}
|
||||
<Libset dir="" libs="{{lib}}"/>
|
||||
{% endfor %}
|
||||
<Libset dir="" libs="stdc++"/>
|
||||
<Libset dir="" libs="supc++"/>
|
||||
<Libset dir="" libs="m"/>
|
||||
<Libset dir="" libs="gcc"/>
|
||||
<Libset dir="" libs="c"/>
|
||||
<Libset dir="" libs="nosys"/>
|
||||
</LinkedLibraries>
|
||||
<MemoryAreas debugInFlashNotRAM="1">
|
||||
<Memory name="IROM1" type="ReadOnly" size="0x00020000" startValue="0x08000000"/>
|
||||
<Memory name="IRAM1" type="ReadWrite" size="0x00001E30" startValue="0x200001D0"/>
|
||||
<Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
|
||||
<Memory name="IRAM2" type="ReadWrite" size="" startValue=""/>
|
||||
</MemoryAreas>
|
||||
<LocateLinkFile path="{{scatter_file}}" type="0"/>
|
||||
</Link>
|
||||
<Output>
|
||||
<Option name="OutputFileType" value="0"/>
|
||||
<Option name="Path" value="./"/>
|
||||
<Option name="Name" value="{{name}}"/>
|
||||
<Option name="HEX" value="1"/>
|
||||
<Option name="BIN" value="1"/>
|
||||
</Output>
|
||||
<User>
|
||||
<UserRun name="Run#1" type="Before" checked="0" value=""/>
|
||||
<UserRun name="Run#1" type="After" checked="0" value=""/>
|
||||
</User>
|
||||
</BuildOption>
|
||||
<DebugOption>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="./stm32f10x_md_128.elf"/>
|
||||
</DebugOption>
|
||||
<ExcludeFile/>
|
||||
</Target>
|
||||
<Target name="Debug" isCurrent="0">
|
||||
<Device manufacturerId="9" manufacturerName="ST" chipId="257" chipName="STM32F100RB" boardId="" boardName=""/>
|
||||
<BuildOption>
|
||||
<Compile>
|
||||
<Option name="OptimizationLevel" value="0"/>
|
||||
<Option name="UseFPU" value="0"/>
|
||||
<Option name="UserEditCompiler" value="-fno-common; -fmessage-length=0; -Wall; -fno-strict-aliasing; -fno-rtti; -fno-exceptions; -ffunction-sections; -fdata-sections; -std=gnu++14"/>
|
||||
<Option name="FPU" value="1"/>
|
||||
<Option name="SupportCPlusplus" value="1"/>
|
||||
<Includepaths>
|
||||
{% for path in include_paths %} <Includepath path="{{path}}"/> {% endfor %}
|
||||
</Includepaths>
|
||||
<DefinedSymbols>
|
||||
{% for s in symbols %} <Define name="{{s}}"/> {% endfor %}
|
||||
</DefinedSymbols>
|
||||
</Compile>
|
||||
<Link useDefault="0">
|
||||
<Option name="DiscardUnusedSection" value="1"/>
|
||||
<Option name="UserEditLinkder" value=""/>
|
||||
<Option name="UseMemoryLayout" value="0"/>
|
||||
<Option name="LTO" value="0"/>
|
||||
<Option name="IsNewStartupCode" value="1"/>
|
||||
<Option name="Library" value="Not use C Library"/>
|
||||
<Option name="nostartfiles" value="0"/>
|
||||
<Option name="UserEditLinker" value="-Wl,--wrap,main; --specs=nano.specs; -u _printf_float; -u _scanf_float; {% for file in object_files %}
|
||||
${project.path}/{{file}}; {% endfor %} {% for p in library_paths %}-L${project.path}/{{p}}; {% endfor %}"/>
|
||||
<LinkedLibraries>
|
||||
{% for lib in libraries %}
|
||||
<Libset dir="" libs="{{lib}}"/>
|
||||
{% endfor %}
|
||||
<Libset dir="" libs="stdc++"/>
|
||||
<Libset dir="" libs="supc++"/>
|
||||
<Libset dir="" libs="m"/>
|
||||
<Libset dir="" libs="gcc"/>
|
||||
<Libset dir="" libs="c"/>
|
||||
<Libset dir="" libs="nosys"/>
|
||||
</LinkedLibraries>
|
||||
<MemoryAreas debugInFlashNotRAM="1">
|
||||
<Memory name="IROM1" type="ReadOnly" size="0x00020000" startValue="0x08000000"/>
|
||||
<Memory name="IRAM1" type="ReadWrite" size="0x00001E30" startValue="0x200001D0"/>
|
||||
<Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
|
||||
<Memory name="IRAM2" type="ReadWrite" size="" startValue=""/>
|
||||
</MemoryAreas>
|
||||
<LocateLinkFile path="{{scatter_file}}" type="0"/>
|
||||
</Link>
|
||||
<Output>
|
||||
<Option name="OutputFileType" value="0"/>
|
||||
<Option name="Path" value="./"/>
|
||||
<Option name="Name" value="{{name}}"/>
|
||||
<Option name="HEX" value="1"/>
|
||||
<Option name="BIN" value="1"/>
|
||||
</Output>
|
||||
<User>
|
||||
<UserRun name="Run#1" type="Before" checked="0" value=""/>
|
||||
<UserRun name="Run#1" type="After" checked="0" value=""/>
|
||||
</User>
|
||||
</BuildOption>
|
||||
<DebugOption>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
|
||||
<Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="./stm32f10x_md_128.elf"/>
|
||||
</DebugOption>
|
||||
<ExcludeFile/>
|
||||
</Target>
|
||||
<Components path="./"/>
|
||||
<Files>
|
||||
{% for file in source_files %}
|
||||
<File name="sources/{{file.path}}" path="{{file.path}}" type="{{file.type}}"/>
|
||||
{% endfor %}
|
||||
{% for file in header_files %}
|
||||
<File name="headers/{{file.path}}" path="{{file.path}}" type="{{file.type}}"/>
|
||||
{% endfor %}
|
||||
</Files>
|
||||
</Project>
|
||||
Loading…
Reference in New Issue