mirror of https://github.com/ARMmbed/mbed-os.git
STM EMAC : NUCLEO_H743ZI2 add
jeromecoutant
parent
b705a9894a
commit
11e39febf6
|
|
@ -0,0 +1,162 @@
|
||||||
|
/* mbed Microcontroller Library
|
||||||
|
* Copyright (c) 2018, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef USE_USER_DEFINED_HAL_ETH_MSPINIT
|
||||||
|
|
||||||
|
#include "stm32h7xx_hal.h"
|
||||||
|
|
||||||
|
#define MCO_Pin GPIO_PIN_0
|
||||||
|
#define MCO_GPIO_Port GPIOH
|
||||||
|
#define RMII_MDC_Pin GPIO_PIN_1
|
||||||
|
#define RMII_MDC_GPIO_Port GPIOC
|
||||||
|
#define RMII_REF_CLK_Pin GPIO_PIN_1
|
||||||
|
#define RMII_REF_CLK_GPIO_Port GPIOA
|
||||||
|
#define RMII_MDIO_Pin GPIO_PIN_2
|
||||||
|
#define RMII_MDIO_GPIO_Port GPIOA
|
||||||
|
#define RMII_CRS_DV_Pin GPIO_PIN_7
|
||||||
|
#define RMII_CRS_DV_GPIO_Port GPIOA
|
||||||
|
#define RMII_RXD0_Pin GPIO_PIN_4
|
||||||
|
#define RMII_RXD0_GPIO_Port GPIOC
|
||||||
|
#define RMII_RXD1_Pin GPIO_PIN_5
|
||||||
|
#define RMII_RXD1_GPIO_Port GPIOC
|
||||||
|
#define RMII_TXD1_Pin GPIO_PIN_13
|
||||||
|
#define RMII_TXD1_GPIO_Port GPIOB
|
||||||
|
#define TMS_Pin GPIO_PIN_13
|
||||||
|
#define TMS_GPIO_Port GPIOA
|
||||||
|
#define TCK_Pin GPIO_PIN_14
|
||||||
|
#define TCK_GPIO_Port GPIOA
|
||||||
|
#define RMII_TX_EN_Pin GPIO_PIN_11
|
||||||
|
#define RMII_TX_EN_GPIO_Port GPIOG
|
||||||
|
#define RMII_TXD0_Pin GPIO_PIN_13
|
||||||
|
#define RMII_TXD0_GPIO_Port GPIOG
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Override HAL Eth Init function
|
||||||
|
*/
|
||||||
|
void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct;
|
||||||
|
if(heth->Instance == ETH)
|
||||||
|
{
|
||||||
|
/* Disable DCache for STM32H7 family */
|
||||||
|
SCB_DisableDCache();
|
||||||
|
|
||||||
|
/* GPIO Ports Clock Enable */
|
||||||
|
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* Enable Peripheral clock */
|
||||||
|
__HAL_RCC_ETH1MAC_CLK_ENABLE();
|
||||||
|
__HAL_RCC_ETH1TX_CLK_ENABLE();
|
||||||
|
__HAL_RCC_ETH1RX_CLK_ENABLE();
|
||||||
|
|
||||||
|
/**ETH GPIO Configuration
|
||||||
|
PC1 ------> ETH_MDC
|
||||||
|
PA1 ------> ETH_REF_CLK
|
||||||
|
PA2 ------> ETH_MDIO
|
||||||
|
PA7 ------> ETH_CRS_DV
|
||||||
|
PC4 ------> ETH_RXD0
|
||||||
|
PC5 ------> ETH_RXD1
|
||||||
|
PB13 ------> ETH_TXD1
|
||||||
|
PG11 ------> ETH_TX_EN
|
||||||
|
PG13 ------> ETH_TXD0
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = RMII_MDC_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||||
|
HAL_GPIO_Init(RMII_MDC_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = RMII_REF_CLK_Pin|RMII_MDIO_Pin|RMII_CRS_DV_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = RMII_RXD0_Pin|RMII_RXD1_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||||
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = RMII_TXD1_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||||
|
HAL_GPIO_Init(RMII_TXD1_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = RMII_TX_EN_Pin|RMII_TXD0_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||||
|
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Override HAL Eth DeInit function
|
||||||
|
*/
|
||||||
|
void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
|
||||||
|
{
|
||||||
|
if(heth->Instance == ETH)
|
||||||
|
{
|
||||||
|
/* Disable Peripheral clock */
|
||||||
|
__HAL_RCC_ETH1MAC_CLK_DISABLE();
|
||||||
|
__HAL_RCC_ETH1TX_CLK_DISABLE();
|
||||||
|
__HAL_RCC_ETH1RX_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**ETH GPIO Configuration
|
||||||
|
PC1 ------> ETH_MDC
|
||||||
|
PA1 ------> ETH_REF_CLK
|
||||||
|
PA2 ------> ETH_MDIO
|
||||||
|
PA7 ------> ETH_CRS_DV
|
||||||
|
PC4 ------> ETH_RXD0
|
||||||
|
PC5 ------> ETH_RXD1
|
||||||
|
PB13 ------> ETH_TXD1
|
||||||
|
PG11 ------> ETH_TX_EN
|
||||||
|
PG13 ------> ETH_TXD0
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOC, RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin);
|
||||||
|
|
||||||
|
HAL_GPIO_DeInit(GPIOA, RMII_REF_CLK_Pin|RMII_MDIO_Pin|RMII_CRS_DV_Pin);
|
||||||
|
|
||||||
|
HAL_GPIO_DeInit(RMII_TXD1_GPIO_Port, RMII_TXD1_Pin);
|
||||||
|
|
||||||
|
HAL_GPIO_DeInit(GPIOG, RMII_TX_EN_Pin|RMII_TXD0_Pin);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif /* USE_USER_DEFINED_HAL_ETH_MSPINIT */
|
||||||
Loading…
Reference in New Issue