Fix astyle issues

pull/14325/head
George Beckstein 2021-02-23 10:03:04 -05:00
parent ec9d647c31
commit 0212fde7fb
5 changed files with 52 additions and 50 deletions

View File

@ -26,19 +26,19 @@
* Override the subtarget sdk init startup hook (specific to nRF2) * Override the subtarget sdk init startup hook (specific to nRF2)
* This will configure the internal regulator to operate at 3.3V * This will configure the internal regulator to operate at 3.3V
*/ */
void subtarget_sdk_init(void) { void subtarget_sdk_init(void)
{
if (NRF_UICR->REGOUT0 != UICR_REGOUT0_VOUT_3V3) if (NRF_UICR->REGOUT0 != UICR_REGOUT0_VOUT_3V3) {
{ NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos; while (NRF_NVMC->READY == NVMC_READY_READY_Busy) {}
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){} NRF_UICR->REGOUT0 = UICR_REGOUT0_VOUT_3V3;
NRF_UICR->REGOUT0 = UICR_REGOUT0_VOUT_3V3; NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos; while (NRF_NVMC->READY == NVMC_READY_READY_Busy) {}
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
// Trigger a soft reset so that the settings take effect // Trigger a soft reset so that the settings take effect
NVIC_SystemReset(); NVIC_SystemReset();
} }
} }

View File

@ -26,7 +26,8 @@
#if MBED_CONF_EP_ATLAS_ENABLE_USB_STDIO_CONSOLE #if MBED_CONF_EP_ATLAS_ENABLE_USB_STDIO_CONSOLE
/* Retarget stdio to USBSerial */ /* Retarget stdio to USBSerial */
mbed::FileHandle *mbed::mbed_target_override_console(int fd) { mbed::FileHandle *mbed::mbed_target_override_console(int fd)
{
static USBSerial usb_serial; static USBSerial usb_serial;
return &usb_serial; return &usb_serial;
} }

View File

@ -48,13 +48,13 @@
#endif #endif
#if defined(__ARMCC_VERSION) #if defined(__ARMCC_VERSION)
__attribute__ ((section(".bss.nvictable"))) __attribute__((section(".bss.nvictable")))
uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS]; uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS];
#elif defined(__GNUC__) #elif defined(__GNUC__)
__attribute__ ((section(".nvictable"))) __attribute__((section(".nvictable")))
uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS]; uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS];
#elif defined(__ICCARM__) #elif defined(__ICCARM__)
uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS] @ ".nvictable"; uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS] @ ".nvictable";
#endif #endif
#include "platform/mbed_toolchain.h" #include "platform/mbed_toolchain.h"
@ -73,11 +73,11 @@ extern uint32_t __Vectors[];
void nrf_reloc_vector_table(void) void nrf_reloc_vector_table(void)
{ {
// Copy and switch to dynamic vectors // Copy and switch to dynamic vectors
uint32_t *old_vectors = VECTORS_FLASH_START; uint32_t *old_vectors = VECTORS_FLASH_START;
uint32_t i; uint32_t i;
for (i = 0; i< NVIC_NUM_VECTORS; i++) { for (i = 0; i < NVIC_NUM_VECTORS; i++) {
nrf_dispatch_vector[i] = old_vectors[i]; nrf_dispatch_vector[i] = old_vectors[i];
} }
#if defined(SOFTDEVICE_PRESENT) #if defined(SOFTDEVICE_PRESENT)
@ -118,12 +118,12 @@ void nrf_reloc_vector_table(void)
void mbed_sdk_init(void) void mbed_sdk_init(void)
{ {
if (STDIO_UART_RTS != NC) { if (STDIO_UART_RTS != NC) {
gpio_t rts; gpio_t rts;
gpio_init_out(&rts, STDIO_UART_RTS); gpio_init_out(&rts, STDIO_UART_RTS);
/* Set STDIO_UART_RTS as gpio driven low */ /* Set STDIO_UART_RTS as gpio driven low */
gpio_write(&rts, 0); gpio_write(&rts, 0);
} }
subtarget_sdk_init(); subtarget_sdk_init();
} }

View File

@ -19,6 +19,7 @@
#include "subtarget_init.h" #include "subtarget_init.h"
#include "platform/mbed_toolchain.h" #include "platform/mbed_toolchain.h"
MBED_WEAK void subtarget_sdk_init(void) { MBED_WEAK void subtarget_sdk_init(void)
{
/* Do nothing by default */ /* Do nothing by default */
} }