ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L011K4/PeripheralPins.c

195 lines
11 KiB
C
Raw Normal View History

[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
/* mbed Microcontroller Library
Add support of ADC internal channels for L0 devices
2016-10-06 12:53:28 +00:00
*******************************************************************************
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
* Copyright (c) 2017, STMicroelectronics
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "PeripheralPins.h"
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
#include "mbed_toolchain.h"
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
//==============================================================================
// Notes
//
// - The pins mentionned Px_y_ALTz are alternative possibilities which use other
// HW peripheral instances. You can use them the same way as any other "normal"
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
// pinout image on mbed.org.
//
// - The pins which are connected to other components present on the board have
// the comment "Connected to xxx". The pin function may not work properly in this
// case. These pins may not be displayed on the board pinout image on mbed.org.
// Please read the board reference manual and schematic for more information.
//
//==============================================================================
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
//*** ADC ***
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_ADC[] = {
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
// {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - Connected to STDIO_UART_TX
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
{NC, NC, 0}
STM32L0 : internal ADC channels
2017-06-29 14:36:51 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
Add support of ADC internal channels for L0 devices
2016-10-06 12:53:28 +00:00
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
//*** DAC ***
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_DAC[] = {
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
//*** I2C ***
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
{PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{PA_13, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C1)},
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{PA_4, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C1)},
{PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
//*** PWM ***
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
// TIM21 (PWM_21) cannot be used because already used by the us_ticker
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_PWM[] = {
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
// {PA_2, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1 - Connected to STDIO_UART_TX
// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - Connected to STDIO_UART_TX
// {PA_3, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
{PA_8, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
// {PA_9, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 2, 0)}, // TIM21_CH2
// {PA_10, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
{PA_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 3, 0)}, // TIM2_CH3
// {PA_11, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 2, 0)}, // TIM21_CH2
// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1 - Connected to STDIO_UART_RX
{PB_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 3, 0)}, // TIM2_CH3
{PB_0_ALT0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
{PB_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 4, 0)}, // TIM2_CH4
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - Connected to LED
// {PB_5, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 1, 0)}, // TIM21_CH1
{PB_6, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 3, 0)}, // TIM2_CH3
{PB_7, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 4, 0)}, // TIM2_CH4
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
//*** SERIAL ***
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_UART_TX[] = {
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{PA_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Connected to STDIO_UART_TX
{PA_2_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // Connected to STDIO_UART_TX (Warning: no LPUART_1 on STDIO_UART_RX = PA_15)
{PA_4, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{PA_9, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
{PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
{PA_14_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{PB_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
{PB_6_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_UART_RX[] = {
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
{PA_0_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
{PA_3_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{PA_10, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
{PA_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, // Connected to STDIO_UART_RX
{PB_7, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
{PB_7_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
STM32L0xx - Add UART_RTS and CTS pins
2016-09-20 12:17:40 +00:00
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{PA_12, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
STM32L0xx - Add UART_RTS and CTS pins
2016-09-20 12:17:40 +00:00
{PB_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
{PB_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{NC, NC, 0}
STM32L0xx - Add UART_RTS and CTS pins
2016-09-20 12:17:40 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
STM32L0xx - Add UART_RTS and CTS pins
2016-09-20 12:17:40 +00:00
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
{PA_6, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
{PA_7, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
{PA_11, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{NC, NC, 0}
STM32L0xx - Add UART_RTS and CTS pins
2016-09-20 12:17:40 +00:00
};
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
//*** SPI ***
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PB_1, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PA_14, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PA_13, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Connected to LED
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};
STM32 : set all PinMap structures as weak This allow custom overwrites
2018-01-29 08:26:49 +00:00
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 12:44:01 +00:00
// {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Connected to STDIO_UART_RX
{NC, NC, 0}
[NUCLEO_L011K4] Add HAL target
2016-06-02 14:25:59 +00:00
};