mbed-os/components/802.15.4_RF/stm-s2lp-rf-driver/README.md

# Example RF driver for STM 802.15.4 transceivers #

Support for:
 * S2-LP

This driver is used with 6LoWPAN and Wi-SUN stacks.

Driver is tested with X-Nucleo-S2868A1 RF expansion board. https://www.st.com/en/ecosystems/x-nucleo-s2868a1.html

NOTE: Default SPI SCLK pin configuration is D13. On X-Nucleo-S2868A1, resistor R6 must be soldered instead of R11. For more information, see user manual UM2405. https://www.st.com/resource/en/user_manual/dm00498153.pdf
Phy drivers: Added S2-LP driver 2018-10-30 11:51:24 +00:00			`# Example RF driver for STM 802.15.4 transceivers #`

			`Support for:`
			`* S2-LP`

Nanostack 802.15.4 RF drivers update Sync Nanostack RF drivers from master copies: -Atmel: v3.0.7 -MCR20A: v1.0.3 -S2LP: v0.0.4 2019-03-18 11:14:57 +00:00			`This driver is used with 6LoWPAN and Wi-SUN stacks.`

			`Driver is tested with X-Nucleo-S2868A1 RF expansion board. https://www.st.com/en/ecosystems/x-nucleo-s2868a1.html`

			`NOTE: Default SPI SCLK pin configuration is D13. On X-Nucleo-S2868A1, resistor R6 must be soldered instead of R11. For more information, see user manual UM2405. https://www.st.com/resource/en/user_manual/dm00498153.pdf`